Ice/metal interfaces: fracture energy and fractography

Results are presented of the fracture tests of ice/metal interfaces in an attempt to utilize fracture mechanics to characterize the failure of ice/solid adhesion. The four-point bending delamination specimen was used to measure the fracture energy of ice/aluminium and ice/steel joints at — 15 °C. The interfacial fracture energy was found to be dependent on ice type and formation procedure of the ice/metal composites. Crack growth was in a manner of asymmetrical bursting, and both cohesive and adhesive failure mechanisms were observed. Although the fracture of ice/metal interfaces was brittle in nature, the evidence of dislocation slip in ice crystals, as revealed by etching and replicating, suggests that microplastic deformations occur in the ice component.     

Optical properties and laser performance of neodymium doped fluoroapatites SrxCa5−x(PO4)3F (x = 0, 1, 2, 3, 4, and 5)

Nd doped fluoroapatites Sr_xCa_5−x(PO₄)₃F(S_xC_5−xPF, X = 0, 1, 2, 3, 4, and 5) single crystals have been grown by the Czochralski technique. Their polarized absorption and emission spectra have been recorded at room temperature and used to calculate the absorption and stimulated emission cross sections. Broadening of the absorption and emission bands is observed for Nd³⁺ in the solid solutions SPF-CPF compared to Nd³⁺ in CPF or SPF. 1% Nd:S_xC_5−xPF, X = 0, 2, 3, 4, and 5, laser rods have been tested in a cavity longitudinally pumped by a 1 W AlGaAs laser diode and compared to Nd:YAG and Nd:YVO₄ rods. All fluoroapatites exhibit very good laser performance with low thresholds and high slope efficiencies, higher than in the case of YAG and equal to the YVO₄ samples. The dependance of the laser output power versus the diode temperature has also been measured for all materials. The laser output was found to be as sensitive to the diode temperature fluctuations for fluoroapatites as for YAG.     

Characterization of titanium alloy implant surfaces with improved dissolution resistance

The present work sets out to investigate the structure and chemistry of surface treated oxides (either aged in boiling water or air-heated) with improved dissolution resistance compared to conventionally passivated surfaces. X-ray photoelectron spectroscopy (XPS) has demonstrated a significant reduction in oxidized aluminium associated with an ageing-based surface treatment. Angle-dependent XPS has revealed an increase in amphoteric-OH surface sites for the thermal treatments. Atomic force microscopy (AFM) investigation suggests that these sites play a role in the improved proteinadsorption properties of these surfaces. These observations form the basis of a model which describes the influence of surface oxide on the kinetics of metal ion dissolution.     

Millimeter-scale actuator with fiber-optic roller bearings

A technique combining semiconductor processing and fiber-optic technology has been developed to micromachine a 1-cm² silicon die that rolls on two wheels above a flat substrate. Each wheel consists of a glass capillary surrounding a fixed solid glass fiber axle. A 100-silicon die is anisotropically etched to create two variable width v-grooves. Each v-groove has a wide center section and two narrow ends, which is schematically illustrated as -==-. The capillary is free to rotate about the axle in the wide v-groove section while the axle is anodically bonded into the narrow v-groove ends. The gap between the die and the substrate is determined by the narrow v-groove width, fiber diameter, and capillary wall thickness. Several rolling die have been fabricated with 210-120 μm gaps. The coefficient of static friction (μ_S) has been investigated on several substrates as a function of the load on the die. Values for μ_S are compared to an unetched die with a silicon nitride coating. With loads ranging from 0-10 grams, the wheels reduce μ_S by more than 50% on borosilicate glass     

D-KAT: a deep knowledge acquisition tool

Abstract: This paper describes a system of shallow and deep knowledge acquisition and representation for diagnostic expert systems. The acquisition system is integrated into a diagnostic expert system shell. Shallow knowledge is represented in a failure model as a set of cause-effect relations among the possible faults, while deep knowledge is represented in three deep models: a functional, a deep causal and a taxonomic model. The acquisition and the representation of all the models are fully integrated. The deep knowledge is used by the final expert system in order to provide the user with deep explanations of the cause-effect relations of the failure model.     

Drugs, memory, and metamemory: A dose-effect study with lorazepam and scopolamine.

This experiment was designed to use the graded dose-related amnesia produced by the benzodiazepine lorazepam (1.0, 2.0 mg/70 kg, oral) and the anticholinergic scopolamine (0.3, 0.6 mg/70 kg, subcutaneous) as a tool to explore the cognitive and neurochemical mechanisms underlying metamemory in the judgment of learning paradigm, with a placebo-controlled independent groups design in healthy volunteers (n=12/group). Results provide evidence for a pharmacological dissociation between effects on memory versus metamemory (relative accuracy of item-by-item monitoring) across a range of levels of memory performance and suggest that the drugs selectively impair those aspects of metamnemonic monitoring that require participants' awareness of their overall current state of functioning (absolute accuracy of prospective item-by-item monitoring, prospective global monitoring) but not those that rely solely on assessment of individual item characteristics (relative accuracy of item-by-item monitoring). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Direct preparation of particles from liquid suspension for ESEM or SEM analysis

A simplified method for the preparation of particles from liquid suspensions has been developed. Particles are deposited directly on carbon planchets for rapid analysis by environmental scanning electron microscopy or by conventional scanning electron microscopy after an additional drying step. This is accomplished by filtering the liquid through thin carbon planchets. Three different grades of graphite were investigated for their suitability as the source material for these planchets. The high quality isomolded graphite is recommended for the filtration and direct observation of particles by electron microscopy. This technique is demonstrated for particles in hydraulic fluid and aquatic suspended particulate material from a natural water source.     

A Programmable Pulse Sequence Generator for an NMR Relaxometer

A pulse sequence generator for NMR relaxometer is described. The operation mode is loaded into the internal memory of the device by a program from a personal computer via a PCI bus. The project is realized on two MAX7000S and Cyclone (Altera) chips using the Qartus II 4.0 software. The basic parameters of the device are as follows: the minimal pulse length is 50 ns, the time resolution is 10 ns, the maximum number of pulses is 1024, and the number of controlled output channels is 8. This device, operating in the automatic mode as part of the hardware-software NMR system, makes possible recording, processing, and storing experimental results in electronic form.