基于行为经济的预期回报与创业决策关联分析

预期回报对决策具有决定性的影响。基于行为经济模型,认为创业决策依赖于预期回报和欲望水平之间的相互作用,并通过计量分析验证了预期回报对创业决策的影响。     

PVC／NBR／HDPE共混体系相容性研究（Ⅰ）增容剂对力学性能的影响

采用丁腈橡胶（ＮＢＲ）及其氢化还原后产物（ＨＮＢＲ）为ＰＶＣ／ＨＤＰＥ共混体系的增容剂，研究了增容剂结构、用量及丙烯腈含量对共混体系相容性的影响。发现丁腈橡胶（ＮＢＲ２９及ＨＮＢＲ２９）对ＰＶＣ／ＨＤＰＥ体系有较好的增容作用，而ＮＢＲ４０及ＨＮＢＲ４０较差。当增容剂用量为２％，ＰＥ含量为８％～１２％时，共混物具有较好的相容性，力学性能得到改善。     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

基于面积流测量原理的一种新型流量测量装置

流量测量装置在自动化系统中应用非常广泛,在热力发电厂中流体的流量直接反映负荷高低、工作状况和运行效率。基于不同测量原理的装置其应用场合也不尽一样,在风量控制领域近几年也出现了十几种形式各异的产品,各种产品都有其自身的优缺点。分析了各种装置的原理及优缺点,重点介绍了一种新型的基于面积流测量原理的测量装置。     

Effect of Y2O3 Content on Microstructure of Gradient Bioceramic Composite Coating Produced by Wide-Band Laser Cladding

Hydroxyapatite (HA) ,a kind of bioactive materi-al , has wide application prospect in hard tissue re-placemen and repairment due to its si milar chemicalcomposition and crystallographic structure to that ofbone mineral[1 ,2]. Since HA has lowstrength (50 …     

Tribology of nitriding layer, TiN coatings and their complex on AISI D2 steel

The sliding wear and impact wear resistances of D2 steel with nitriding layer, PVD titanium nitride coating and their duplex treatment were investigated. The experimental results suggest that the duplex treatment has the best sliding and impact wear resistances under experimental conditions. And the wear resistance of PVD titanium nitride is better than that of nitriding. The impact wear resistance and wear mechanism of all three surface layers remain unchanged under impact load of 0.2 J or 1 J. All samples end with the same symptom of flaking.     

废橡胶制品低温塑化法生产再生胶

介绍了国内外化学脱硫法生产再生胶的概况，低温塑化再生的机理。重点介绍了废三元乙丙胶、废丁基胶等制品用低温塑化法制作再生胶的实验情况。     

LiMn2O4纳米粉的湿化学合成与表征

采用湿化学方法，通过水溶液中的化学反应直接合成纳米级LiMn2O4化合物，其结构基本上为无定型，但XRD图谱中已出现LiMn2O4特征峰，说明在水溶液中已初步形成尖晶石结构，运用XRD，SEM，TG－DTA等现代检测手段对样品的性能进行进行了表征，XRD及SEM等分析结果表明，合成样品经简单热处理后，晶型结构完善，形貌规整，均匀，比表面积积显著减小，粒度明显变粗。TG－DTA热分析证明，样品在低于900℃的温度下进行热处理时，仅发生LiMn2O4的晶化过程，产物的化学组成稳定，该法合成锂离子电池正极材料LiMn2O4，具有工艺流程简单，产物的成分，结构及粒度均匀等特点。     

RCC斜层平推铺筑法施工质量评估

RCC混凝土斜层平推铺筑法是一项新的施工工艺,本文通过芯样测试法对该工艺进行了全面细致的质量评估。     

掺矿渣微粉和粉煤灰的水泥胶砂性能试验研究

 根据正交设计法,利用L24(61×41×23)正交表安排试验,探讨了混合材掺 量、矿渣微粉与粉煤灰的比例、矿渣微粉细度、粉煤灰品种对水泥胶砂流动度、7,28,90 d 龄期的抗压强度的影响,初步确定水泥熟料、矿渣微粉、粉煤灰三元体系的较优组合。结果 表明,粉煤灰与矿渣微粉双掺比单掺矿渣微粉或单掺粉煤灰的水泥胶砂,具有一定的优势。