垂直姿态的非正交测量优化与校正

垂直小角度时,采用的非正交姿态测量方法旨在解决传感器输出信号极微弱和解算精度低等问题。描述了非正交坐标系的理论模型,对其进行了优化,确定了最佳偏置角度。利用补偿矩阵对因测斜仪安装问题引入的位置误差进行校正,通过井斜角和工具面角的解算结果验证校正效果。测试结果表明,在偏置角为45°时,姿态参数具有较高的解算精度;而数据校正能大幅度降低位置误差,进一步提高测量精度。     

Synthesis and characterization of degradable copoly(trans‐4‐hydroxy‐L‐proline/ϵ‐caprolactone)

The melt polycondensation reaction of N‐protected trans‐4‐hydroxy‐L ‐proline (N‐Z‐Hpr) and ?‐caprolactone (?‐CL) over a wide range of molar fractions in the feed produced new and degradable poly(N‐Z‐Hpr‐co‐?‐CL)s with stannous octoate as a catalyst. The optimal reaction conditions for the synthesis of the copolymers were obtained with 1.5 wt % stannous octoate at 140°C for 24 h. The synthesized copolymers were characterized by IR spectrophotometry, ¹H NMR, differential scanning calorimetry, and Ubbelohde viscometry. The values of the inherent viscosity (η_inh) and glass‐transition temperature (T_g) of the copolymers depended on the molar fractions of N‐Z‐Hpr. With an increase in the trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) feed from 10 to 90 mol %, a decrease in η_inh from 2.47 to 1.05 dL/g, and an increase in T_g from ?48 to 49°C were observed. The in vitro degradation of these poly(N‐CBz‐Hpr‐co‐?‐CL)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3176–3182, 2003     

Recent developments of cement chemistry in China: Invited review paper

In recent years, much work has been done by the cement chemists in China centering on energy saving in cement and concrete making and improving the properties of both.     

褐煤成型的研究

由于褐煤具有含水率高，灰份大，易风化，发热值低等特点，使得成型难度很大．本文重点研究水份粒度、添加剂、成型压力等对褐煤成型的影响．最佳条件：粒度＜１ｍｍ，水份１４～１６％，压力＞５０Ｔｆ，添加剂１０～２０％．     

Single‐pack,self‐curable,aqueous‐based polyurethane dispersion containing a disperse dye

An organic‐solvent‐soluble disperse dye was introduced into an aqueous phase by a reaction with a self‐emulsified, aqueous‐based polyurethane (PU), and this resulted in the formation of a homogeneous, aqueous polymeric dye dispersion. This aqueous polymeric dye was stable in a water phase with excellent color extension upon application. It was formulated with a latent curing agent, polyaziridine (e.g., TMPTA‐AZ), as a single‐component, self‐curable, aqueous polymeric dye. The curing reaction took place between PU carboxylic acid and the latent curing agent upon drying. A self‐cured polymeric dye was obtained with excellent color extension and fastness and resistance to organic solvents and water after drying. This single‐component, self‐curable, aqueous‐based PU system containing a dye has potential for printing, writing, and dyeing applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 2006 © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3741–3747, 2006     

Mechanical characterization and chemical resistances of cured unsaturated polyester resins modified with vinyl ester resins based on recycled poly(ethylene terephthalate)

Unsaturated polyester resin (UP) was prepared from glycolyzed oligomer of poly(ethylene terephthalate) (PET) waste based on diethylene glycol (DEG). New diacrylate and dimethacrylate vinyl ester resins prepared from glycolysis of PET with tetraethylene glycol were blended with UP to study the mechanical characteristics of the cured UP. The vinyl ester resins were used as crosslinking agents for unsaturated polyester resin diluted with styrene, using free‐radical initiator and accelerator. The mechanical properties of the cured UP resins were evaluated. The compressive properties of the cured UP/styrene resins in the presence of different vinyl ester concentrations were evaluated. Increasing the vinyl ester content led to a pronounced improvement in the compression strength. The chemical resistances of the cured resins were evaluated through hot water, solvents, acid, and alkali resistance measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3175–3182, 2007     

Blends of poly(propylene) and polyacetal compatibilized by ethylene vinyl alcohol copolymers

Polymer blends of poly(propylene) (PP) and polyacetal (polyoxymethylene, POM) with ethylene vinyl alcohol (EVOH) copolymers were investigated by differential scanning calorimetry (DSC), rheological, tensile, and impact measurements, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The PP–POM–EVOH blends were extruded with a co‐rotating twin‐screw extruder. The ethylene group in the EVOH is partially miscible with PP, whereas the hydroxyl group in the EVOH can form hydrogen bonding with POM. The EVOH tends to reside along the interface, acting as a surfactant to reduce the interfacial tension and to increase the interfacial adhesion between the blends. Results from SEM and mechanical tests indicate that a small quantity of the EVOH copolymer or a smaller vinyl alcohol content in the EVOH copolymer results in a better compatibilized blend in terms of finer phase domains and better mechanical properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1471–1477, 2003     

Effect of montmorillonite on the swelling behavior and drug‐release behavior of nanocomposite hydrogels

A series of nanocomposite hydrogels were prepared from various ratios of N‐isopropylacrylamide (NIPAAm) and organic montmorillonite (MMT). The influence of the extent of MMT in the NIPAAm/MMT nanocomposite hydrogels on the physical properties and drug‐release behavior was the main purpose of this study. The microstructure and morphology were identified by X‐ray diffraction (XRD) and scanning electronic microscopy (SEM). The results showed that the swelling ratios for these nanocomposite hydrogels decreased with increase in the content of MMT. The gel strength and Young's modulus of the gels also increased with increase in the content of MMT. XRD results indicated that the exfoliation of MMT was achieved in the swollen state. Finally, the drug‐release behavior for the gels was also assessed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3652–3660, 2003     

WLSP852型微量硫分析仪在原料气分析中的应用

介绍WLSP852微量硫分析仪成功取代陈旧的汞量法用于原料气硫分析。不仅能准确分析进口管线、气液离器、加氢转化炉等位号硫的总含量，还能分别测定各种形态硫的含量。     

高效低泡净洗剂的研制与应用

对不同配方的发泡力、泡沫稳定性以及净洗效果的测试结果表明皂剂、烷基苯磺酸盐和平平加O按适当比例进行复配可以得到泡沫少、泡沫破灭快，净洗效果好的高效低泡净洗剂。