海底天然气管道投产案例分析

为防止形成天然气水合物，天然气管道在投产前必须彻底干燥。海底管道距离长，不能分段施工，多采用清管器组加干燥剂的作业方案，这就存在清管器组的运行控制、卡球和窜漏等问题，作业难度高、风险大。针对我国海底输气管道投产前干燥施工过程中出现的憋压、卡球、窜漏和清管器磨损等问题进行了分析，说明了发生问题的原因。对比研究了不同管道干燥方案的优缺点、清管器使用的合理性、干燥剂使用效果和干燥指标的制定与监测方法等问题。在此基础上， 提出了针对海底天然气管道的凝胶、干燥剂和多盘清管器的组合干燥方案。该方案能有效解决密封、卡球和凝胶滞留等问题，并能确保施工质量，对类似工程有借鉴意义。     

Complementary effects of solid lubricants in the automotive brake lining

An experimental investigation was carried out to examine the tribological behavior of NAO (non-asbestos organic) type brake linings containing different volume ratios of graphite and antimony trisulfide (Sb₂S₃). A scale dynamometer was used for friction tests and particular emphases were given to the effect of applied pressure, sliding speed, and temperature on the coefficient of friction according to the relative amounts of the two solid lubricants. Results showed that the brake linings with both solid lubricants exhibited better friction stability and less speed sensitivity than the friction materials containing a single solid lubricant. In particular, the brake lining containing higher concentrations of graphite showed better fade resistance than others during high-temperature friction test.     

Effect of Thickness of the p-AlGaN Electron Blocking Layer on the Improvement of ESD Characteristics in GaN-Based LEDs

The following letter presents a study regarding GaN-based light-emitting diodes (LEDs) with p-type AlGaN electron blocking layers (EBLs) of different thicknesses. The study revealed that the LEDs could endure higher electrostatic discharge (ESD) levels as the thickness of the AlGaN EBL increased. The observed improvement in the ESD endurance ability could be attributed to the fact that the thickened p-AlGaN EBL may partly fill the dislocation-related pits that occur on the surface of the InGaN-GaN multiple-quantum well (MQW) and that are due to the strain and the low-temperature-growth process. If these dislocation-related pits are not partly suppressed, they will eventually result in numerous surface pits associated with threading dislocations that intersect the InGaN-GaN (MQW), thereby reducing the ESD endurance ability. The results of the experiment show that the ESD endurance voltages could increase from 1500 to 6000 V when the thickness of the p-AlGaN EBL in the GaN LEDs is increased from 32.5 to 130 nm, while the forward voltages and light output powers remained almost the same.     

Probing stress effects in HfO2 gate stacks with time dependent measurements

Effects of constant voltage stress (CVS) on gate stacks consisting of an ALD HfO₂ dielectric with various interfacial layers were studied with time dependent sensing measurements: DC I–V, pulse I–V, and charge pumping (CP) at different frequencies. The process of injected electron trapping/de-trapping on pre-existing defects in the bulk of the high-κ film was found to constitute the major contribution to the time dependence of the threshold voltage (V_t) shift during stress. The trap generation observed with the low frequency CP measurements is suggested to occur within the interfacial oxide layer or the interfacial layer/high-κ interface, with only a minor effect on V_t.     

实用钢筋混凝土梁板结构优化设计

本文比较全面地考虑了钢筋混凝土梁板结构实际设计时的全部必要约束,给出了一套(单跨矩形和T形梁、单向板、按弹性理论计算的双向板和矩形等截面连续梁)简单实用的近优化设计的解析公式,为编制其优化设计的实用程序和图表提供了根据.     

Genetic synthesis of a fuzzy pulse discriminator in electrical discharge machining

In this paper, a sensor system, called a fuzzy pulse discriminator, is developed to classify various discharge pulses in electrical discharge machining (EDM). The fuzzy rules of the pulse discriminator are obtained based on the features of the gap voltage and gap current between the tool workpiece. The membership functions of the fuzzy pulse discriminator are automatically synthesized by using genetic algorithms. The effectiveness of this approach is verified under different cutting parameters.     

Epidemiology of hepatitis C and G in sporadic and familial porphyria cutanea tarda

From 1995 to 1997, we prospectively evaluated the prevalence of hepatitis C virus (HCV) RNA in 124 patients with porphyria cutanea tarda (PCT) from Northern France (83 sporadic and 41 familial PCT). Serum samples were analyzed for ferritin, transaminases, HCV antibodies, and HCV RNA. In addition, genotyping of HCV and searches for HCV infection risk factors (blood transfusion, iv drug abuse, and surgical intervention) were performed. Twenty-six of 124 patients (21%; 95% CI: 13.9-28) were positive for serum HCV antibodies. All of them were also positive for HCV RNA. The prevalence of HCV infection was higher in the sporadic PCT group (26.5%, 22 out of 83) than in the familial PCT group (9.7%, 4 out of 41). Risk factors for hepatitis C infection were found to be significantly increased in the HCV-positive group when compared with the HCV-negative PCT group. In all HCV-positive patients with a risk factor, the suspected date of exposure to the virus always preceded the clinical onset of PCT. The HCV genotype pattern in PCT patients was similar to that observed in nonporphyric HCV patients in western European countries. Serum ferritin level was increased in both HCV-positive and HCV-negative porphyric patients. Transaminase levels were significantly higher in HCV-infected PCT patients. Sixty-seven out of 124 patients were retrospectively studied for hepatitis G virus (HGV) infection. Six of these 67 patients (8.9%; 95% CI: 2.1-15.8) were positive for HGV RNA. None of the six HGV-infected patients were positive for HCV RNA. The HGV-infected patients did not differ statistically from those without HGV infection with regard to age, ferritin, transaminase levels, and PCT treatment. These results support the view that sporadic cases of HGV infection may occur frequently. This study of a large cohort of HCV and PCT patients further documents an increasing gradient in HCV prevalence from northern to southern Europe, and shows that HCV infection acts as a triggering factor of PCT. Finally, the HGV prevalence found in the PCT patients was comparable with that found in French blood donors, suggesting that HGV is not a PCT triggering factor.     

Model development for multicomponent mass transfer with rapid chemical reactions in a small drop

Multicomponent mass transfer accompanied by instantaneous chemical reactions in a small drop has been modeled and simulated for the case where two different solutes diffuse from a continuous phase into the drop and react rapidly with a third reactant in the drop. The computational results obtained by Galerkin’s finite element method are reported in terms of concentration profiles, the locations of reaction front, the cumulative mass flux, and the enhancement factor. The effects of physical parameters, such as diffusivities of the solutes and the reactant, the interfacial concentration of solutes, and the relative amount of the reactant, on the calculated quantities are discussed.     

1.04 GBd low EMI digital video interface system using small swingserial link technique

In a high-resolution flat panel system, a conventional interface that directly connects a liquid crystal display (LCD) controller to a flat panel cannot overcome the problems of excess EMI (electromagnetic interference) and power caused by full-swing transmission signals in parallel lines. This paper presents a high-speed digital video interface system implemented with a low-cost standard CMOS (complimentary metal-oxide-semiconductor) technology that can mitigate EMI and power problems in high-resolution flat panel display systems. The combined architecture of the high-speed, small number of parallel lines and low-voltage swing serial interface can support resolutions from VGA (640×480 pixels) up to XGA (1024×768 pixels) with significant power improvement and drastic EMI reduction. To support high-speed, low-voltage swing signaling and overcome channel-to-channel skew problems, a robust data recovery system is required. The proposed digital phase-locked loop enables robust skew-insensitive data recovery of up to 1.04 GBd