Effect of supports on the redox performance of pyrite cinder in chemical looping combustion

Chemical looping combustion (CLC) is a clean and efficient flame-free combustion technology,which combust the fuels by lattice oxygen from a solid oxygen carrier with inherent CO2 capture.The develop-ment of oxygen carriers with low cost and high redox performance is crucial to the whole efficiency of CLC process.As the solid by-product from the sulfuric acid production,pyrite cinder presented excellent redox performance as an oxygen carrier in CLC process.The main components in pyrite cinder are Fe2O3,CaSO4,Al2O3 and SiO2 in which Fe2O3 is the active component to provide lattice oxygen.In order to sys-tematic investigate the functions of supports (CaSO4,Al2O3 and SiO2) in pyrite cinder,three oxygen car-riers (Fe2O3-CaSO4,Fe2O3-Al2O3 and Fe2O3-SiO2) were prepared and evaluated in this study.The results showed that Fe2O3-CaSO4 displayed high redox activity and cycling stability in the multiple redox cycles.However,both Fe2O3-Al2O3 and Fe2O3-SiO2 experienced serious deactivation during redox reactions.It indicated that the inert Fe-Si solid solution (Fe2SiO4) was formed in the spent Fe2O3-SiO2 sample,which decreased the oxygen carrying capacity of this sample.The XPS results showed that the oxygen species on the surface of Fe2O3-CaSO4 could be fully recovered after the 20 redox cycles.It can be concluded that CaSO4 is the key to the high redox activity and cycling stability of pyrite cinder.     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

Characterization of ultrafine La x Sr1−x MnO3 powder prepared by spray pyrolysis

The characterization of La _x Sr_1−x MnO₃ powders produced by spray pyrolysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observation, specific surface area (Brunauer-Emett-Teller), and particle size distribution measurements shows that the resultant large particles are loose agglomerates consisting of many small particles. However, the sintered tiny particles can form hard agglomerates, and the particle size increases remarkably. The structures of the powders before and after sintering were identified by x-ray diffraction (XRD). The study of the electrical property of the powder shows that the powder is a metallic conductor. In a reducing atmosphere, the powder can be decomposed. When the powder is cofired with yttria-stabilized zirconia 5% (YSZ) powder at 1200 °C for 5 h, no new phase is produced, and the powder remains a single provskite hexagonal-rhombohedral structure.     

测定银的新催化分光光度法研究──藏红T－碘化钾指示反应体系

根据银对藏红Ｔ与碘离子氧化还原反应的催化作用，建立了一种测定微量银的动力学光度法。方法的线性范围为０．５～４．０μｇ／ｍｌ，检测限为０．０２μｇ／ｍｌ。除Ｈｇ２＋严重干扰，Ｆｅ３＋、Ｃｒ６＋有轻度干扰外，其余常见的离子不影响测定。与常见测定银的动力学法相比，本法反应速度很快，且所有测定均可在室温下进行。     

铁(Ⅲ)—苯芴酮—聚乙二醇辛基苯基醚显色反应的研究及应用

详细研究了非离子表面活性剂聚乙二醇辛基苯基醚（OP）存在下铁（Ⅲ）与苯芴酮的显色反应。结果表明铁（Ⅲ）与苯芴酮形成了蓝紫色的配合物，其最大吸收波长λmax为614nm，对比度（△λ）为74nm，摩尔吸光系数ε614为6．41×104L·emol(-1)·cm(-1)，铁量在0～16μg／25mL范围内服从比耳定律。所拟方法用于磷矿样中铁的分析与邻菲罗啉法结果一致。     

Analysis of the oscillatory behavior of double-walled carbon nanotube-based oscillators

Molecular dynamics simulations of oscillatory behaviors of double-walled carbon nanotube-based oscillators are performed. The second-generation empirical bond-order potential is used for the atomic interactions within a wall, and a registry-dependent and four different registry-independent van der Waals potentials are used for the atomic interactions between walls. It is found that the frequencies of the nanotube oscillators are sensitive to the choice of the van der Waals potentials. An almost non-decay oscillation is observed for the registry-dependent potential when there is no rocking motion. However, an apparent decay oscillation is observed when rocking motion occurs. A decay oscillation is observed for all registry-independent potentials even without rocking motion. Mechanisms leading to unstable oscillatory behavior are analyzed.     

环己烷液相无催化剂的氧化动力学研究

采用搅拌釜反应器,在确认已排除传质因素对反应速率影响的情况下,研究了环己烷液相无催化剂的氧化反应动力学。应用自由基理论及最优化计算技术,从导出的8个候选动力学模型中,确定了最佳的动力学模型,它能满意地描述环已烷氧化过程。该动力学可为环己烷氧化工业生产操作条件的优化、反应器的选型及工业设计提供依据。     

结晶性高聚物作为相变材料的应用

本文研究了结晶性高聚物聚乙烯及其共混物作为相变材料对模拟发热体铜片热量的吸收作用，由于相变的吸热，铜片的温度在一定时间范围内保持在一个定值。选择不同的相变材料，可使这种温度平台出现在不同的温度范围，不共晶的共混物可有两个以上的温度平台，提高了降温效果。     

大学毕业生就业中的几对矛盾及其化解

我国大学毕业生就业形势日趋严峻,就业问题已经引起了社会的广泛关注,社会各界都在为大学生就业出主意、想办法.笔者对目前毕业生就业中的几对矛盾及其化解作了一些探索,本文就如何解决这些矛盾谈一点看法.     

原子吸收光谱法测定生产金刚石电解触媒废液沉渣中的锰

通过正交实验确定了利用原子吸收分光光度法测定锰的最佳测试条件,并测定了生产金刚石电解触媒废液沉渣中的锰含量,实验准确度和精密度较高,适合工业快速分析.