Investigation of pre-structured GaAs surfaces for subsequent site-selective InAs quantum dot growth

In this study, we investigated pre-structured (100) GaAs sample surfaces with respect to subsequent site-selective quantum dot growth. Defects occurring in the GaAs buffer layer grown after pre-structuring are attributed to insufficient cleaning of the samples prior to regrowth. Successive cleaning steps were analyzed and optimized. A UV-ozone cleaning is performed at the end of sample preparation in order to get rid of remaining organic contamination.     

Influence of Electron Beam Irradiation on High‐Temperature Mechanical Properties of Ethylene Vinyl Acetate/Carbon Fibers Composites

The purpose of this study was to investigate the effect of carbon fiber (CF) and electron‐beam (EB) radiation on high‐temperature mechanical properties of ethylene‐vinyl acetate (EVA). Polymer composites were prepared by mixing on a two‐roll mill. After compression molding, the samples were irradiated between 60 and 180 kGy, and dynamic mechanical analysis (DMA) was used to characterize physical properties. The effects of filler content and radiation level on the mechanical properties of EVA/CF were evaluated. The shear stress and modulus were observed to increase with increasing of the filler level. However, there was a dramatic decrease in creep compliance. It was also shown that introduction of irradiation on EVA composite increases the shear stress and the real part of the dynamic shear modulus G' due to the increase in molecular weight and cross‐linking of the polymer after irradiation. J. VINYL ADDIT. TECHNOL., 26:325–335, 2020. © 2019 Society of Plastics Engineers     

Physicochemical Methods for Prediction of Functional Information for Proteins

Structural genomics initiatives are determining thousands of new protein structures. Many of these structures are of unknown function, and computational methods for the rapid determination of functional information from protein structure are needed. We present details of how functional information is obtained from the structure using THEMATICS (Theoretical Microscopic Titration Curves). THEMATICS is a computational procedure that gives information about chemical reactivity, based on solution of the Poisson-Boltzmann equations for the electrical potential function. We show how anomalies in predicted titration curves are established. We show further that when residues with anomalous predicted titration curves form a cluster in physical space, these residues tend to be very highly conserved across species and such clusters are reliable predictors of the active site. Results are given for ten enzymes; detailed results are shown for the enzymes triosephosphate isomerase (from chicken), 6-hydroxymethyl-7,8-dihydropterin pyrophosphokinase (from E. coli), and papain (from papaya).     

Structure–Activity Relationships of 2‐Sufonylpyrimidines as Quorum‐Sensing Inhibitors to Tackle Biofilm Formation and eDNA Release of Pseudomonas aeruginosa

Drug‐resistant Pseudomonas aeruginosa (PA) strains are on the rise, making treatment with current antibiotics ineffective. Hence, circumventing resistance or restoring the activity of antibiotics by novel approaches is of high demand. Targeting the Pseudomonas quinolone signal quorum sensing (PQS‐QS) system is an intriguing strategy to abolish PA pathogenicity without affecting the viability of the pathogen. Herein we report the structure–activity relationships of 2‐sulfonylpyrimidines, which were previously identified as dual‐target inhibitors of the PQS receptor PqsR and the PQS synthase PqsD. The SAR elucidation was guided by a combined approach using ligand efficiency and ligand lipophilicity efficiency to select the most promising compounds. In addition, the most effective inhibitors were rationally modified by the guidance of QSAR using Hansch analyses. Finally, these inhibitors showed the capacity to decrease biofilm mass and extracellular DNA, which are important determinants for antibiotic resistance.     

Yttrium doping of Ba0.5Sr0.5Co0.8Fe0.2O3-δ part II: Influence on oxygen transport and phase stability

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF) in its cubic perovskite phase has attracted much interest for potential use as oxygen transport membrane (OTM) due to its very high oxygen permeability at high temperatures. However, performance degradation due to a sluggish phase decomposition occurs when BSCF is operated below 840?°C. Partial B-site substitution of the transition metal cations in BSCF by larger and redox-stable cations has emerged as a potential strategy to improve the structural stability of cubic BSCF. In this study, the influence of yttrium doping (0…10?mol-%) on oxygen transport properties and stability of the cubic BSCF phase is assessed by in situ electrical conductivity relaxation (ECR) and electrical conductivity measurements during long-term thermal annealing both at 700?°C and 800?°C. Detailed phase analysis is performed by scanning electron microscopy (SEM) after long-term annealing of the samples in air at different temperatures.     

Interaction of 1-allyl-3-methyl-imidazolium chloride and carbon black and its influence on carbon black filled rubbers

The interactions of the ionic liquid 1-allyl-3-methyl-imidazolium chloride (AMIMCl) with different grades of carbon black have been investigated using rheological measurements, differential scanning calorimetry and Raman spectroscopy. We could prove strong attractive interactions of AMIMCl with the carbon black surface, which result, for example, in the formation of an AMIMCl–carbon black–bucky gel and in an increased glass transition temperature of the ionic liquid in the presence of carbon black. Raman spectroscopy revealed that the AMIMCl is preferably attached to the edges of graphitic crystals at the carbon black surface, which have the highest adsorption energies. A surface treatment of different grades of carbon black with AMIMCl led to significant changes of the mechanical and electrical properties of different rubber compounds filled with carbon black, which can be attributed to a decreased filler–polymer interaction and a local plasticising effect of the AMIMCl at the carbon black surface.     

Model studies on the mechanism of endotoxin adsorption on flat-sheet microfiltration membrane adsorbers

The adsorption of endotoxin from E.coli O 111:B₄ and bovine serum albumin on membrane adsorbers with the ligands polymyxin B, L-histidine, deoxycholate, poly(L-lysine), poly(ethyleneimine) and diethylaminoethyl was studied under equilibrium and dynamic conditions. Apparent association constants varied between 30 and 30 000 mL/mg for endotoxin, whereas with BSA only approximately 1 mL/mg was found on average. With all ligands a reduction of the removal efficiency was experienced in the presence of BSA, which was used as model protein. Detailed analysis of the influence of BSA on the association constants as well as the equilibrium and dynamic capacities of endotoxin adsorption demonstrated that endotoxin and BSA molecules recognize distinct binding centres on the membrane adsorbers. Competition for binding sites plays a less important role than assumed so far. It is concluded that interactions of endotoxin with protein molecules in solutions are limiting endotoxin clearance from protein solutions. With net-positively charged proteins, electrostatic interactions yield protein-endotoxin complexes. Net-negatively charged proteins attract endotoxin by the mediation of calcium ions that are derived from endotoxin micelles and vesicles. In the latter case, endotoxin clearance can be significantly improved by the addition of EDTA.     

Influence of water and magnesium ion on the optical properties in various plasticized poly(vinyl butyral) sheets

The study is focused on influences of optical properties change of poly(vinyl butyral) (PVB) sheets determined for safety glass preparing. Optic measurements were evaluated itself and after, the laminated glass was observed. The study deals with a cognizance of causation of the optical properties change in different PVB sheets in dependence on adsorbed water content into the polymer matrix. Results of this work describe the influence of ? OH group content on PVB chain and type and amount of additives adjusting adhesion of PVB towards glass. However, the most important discovery of this work is evaluation of critical water content that leads to haze generation. The evaluation of various types of sheets was performed. At the same time the artificial addition of Mg²⁺ salts of organic acids (with various polarity of the molecule) was evaluated to assess their influence on haze generation. It was found that haze caused by Mg²⁺ salt is possible to eliminate when there is certain water content in PVB. Obtained values and comparisons are very important for PVB sheets industry and for industry dealing with lamination of PVB between glasses. Influence of these factors and comparison of haze generation for various PVB sheets has not been published yet. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Chromatin-unstable boar spermatozoa have little chance of reaching oocytes in vivo

In the present study, the prevalence of chromatin instability in the fertilizing-competent sperm population in the porcine oviduct in vivo was examined through qualitative analysis of the chromatin structure status of accessory boar sperm found in in vivo-derived embryos. The binding of chromatin-unstable sperm to oviductal epithelium in vitro was also studied. To examine the sperm chromatin state, a modified fluorescence microscopic sperm chromatin structure assay was used. Among a population of 173 fertile boars, individuals were selected for according to their chromatin status: 25 animals showed more than 5% of chromatin-unstable sperm in their ejaculates, and 7 showed consistently elevated percentages of chromatin-unstable sperm in three successively collected semen samples. A positive correlation was found between incidence of chromatin instability and attached cytoplasmic droplets (r=0.44, P<0.01). Analyses of accessory spermatozoa from in vivo-derived embryos demonstrated that the proportion of chromatin-unstable sperm was significantly (P<0.05) reduced in the population of fertilizing-competent sperm in the oviduct compared with the inseminated sperm. Populations of sperm bound to the oviduct in vitro had significantly (P<0.05) lower percentages of chromatin instability than in the original diluted semen sample. In conclusion, numbers of sperm with unstable chromatin are reduced in the oviductal sperm reservoir, possibly because of associated changes in the plasma membrane that prevent sperm from binding to the oviductal epithelium. We conclude that in vivo the likelihood that sperm with unstable chromatin will reach the egg and fertilize it is low.     

Methodology to Optimize Rainwater Tank-sizing and Cluster Configuration for a Group of Buildings

Water Resources Management - The behavior of a rainwater harvesting system depends on some variables that cannot be controlled, such as rainfall, building roof size and water consumption. The...