Spatial distribution of light-induced lipid oxidation in semi-hard yellow cheese as detected by confocal microscopy

The migration of oxidative damage in semi-hard yellow cheese resulting from surface exposure to 436 nm monochromatic light with an intensity of 2.5 × 10¹⁷ quanta min⁻¹ cm⁻² for 0, 5, 10, and 15 min was followed by confocal laser scanning microscopy using labelling with the lipophilic fluorescence ratio probe C₁₁-Bodipy (581/591). From 5 × 5 × 5 mm cubes of cheese exposed to light on one plane 35 μm was sliced off and fluorescence of oxidised and non-oxidised probe recorded simultaneously on the surface of the slice reaching 250 μm inwards from the exposed surface. From the emission of the fluorescence ratio probe light-induced lipid oxidation could be followed with time of exposure to light. The penetration of light inwards in the cheese with time expressed as quanta cm⁻², as calculated from light transmittance at 436 nm determined spectrophotometrically for cheese slices of up to 300 μm thickness, together with light intensity as determined by actinometry, could alone account for the inwards migration of oxidation. Diffusion of radicals seems of less importance for spatial dispersion of light-induced oxidation in semi-hard cheese.     

Linking Grain Boundaries and Grain Growth in Ceramics

The macroscopic properties of most materials are strongly influenced by grain size. In ceramic materials the microstructure usually results from the sintering process. Understanding the basic mechanisms of grain growth on an atomic length scale in ceramics would be beneficial to tailor the microstructure for improved macroscopic performance of devices. A method is presented using grain growth experiments to select samples for closer examination of grain boundaries with transmission electron microscopy. The growth experiments are used to identify temperatures were changes at grain boundaries occur at high temperature. Subsequently samples of interest are investigated using transmission electron microscopy (TEM) methods. The correlation between TEM results and changes in grain growth behavior can be used to gain closer insight into the processes occurring during grain growth at an atomic length scale. Strontium titanate is used as model system to demonstrate the combination of growth experiments with TEM results. Normal grain growth shows two distinct drops in growth rate in the temperature range between 1 300 and 1 425 °C, independent of the A‐site to B‐site stoichiometry of the perovskite. In previous studies a high preference for grain boundary planes oriented parallel to the 100 direction of one of the adjacent grains was found in the high temperature regime. This study shows that the preference does not exist in the low temperature regime possibly explaining the change in grain growth rate.     

Phthalates exposure indicators determined by urinary phthalate metabolites in healthy non-obese Czech adults: FANTOM study

It is assumed that human exposure to phthalates may be associated with adverse health effects. The indicators of urinary phthalate metabolite concentrations in healthy adults are limited. In this study, the phthalate metabolites concentrations were detected from 24-h urine collection in non-obese Czech adults (n = 201). Each participant filled in an 80-item questionnaire (FANTOM-SQ 2013) regarding the outdoor and indoor sources of phthalates, the use of personal care products and food intake sources. The concentrations of 15 phthalates metabolites were analysed following enzymatic cleavage of the glucuronide using ultra-high-performance liquid chromatography-electrospray ionisation tandem mass spectrometry (UHPLC-ESI-MS/MS). The indicators of chronic or acute exposure phthalate-containing materials were identified. It is shown that higher fruit consumption was positively and significantly associated with a higher level of total 15 urinary phthalates biomarkers (p < 0.001). Regular meat consumption showed a negative significant association with total 15 phthalates metabolites (p < 0.01). The use of personal care products was significantly and positively correlated with monoethyl phthalate urine concentrations (p < 0.05). The analysis of the dietary behaviour and personal care products use in the Czech non-obese population showed it to be a predictable tool in the level of phthalates exposure when high fruit consumption and personal care products use are linked to higher phthalate metabolite contents in the urine. However, this topic deserves more research.     

Coercivity and domain structure of nanograined Fe–C alloys after high-pressure torsion

The microstructure and magnetic properties of binary hypo- and hyper-eutectoid Fe–C alloys were studied. The investigations have been carried out on the samples in the as-cast state, after a long annealing at 725 °C and on the specimens after the high-pressure torsion (HPT). The deformation was carried out at the ambient temperature and the pressure of 5 GPa. The grain size after HPT is in the nanometer range. Long annealing leads to a drastic decrease of the coercivity in comparison with the as-cast alloys. In all alloys the coercivity H _c increases with increasing carbon content. The distance L between pinning points for domain walls decreases with increasing carbon content. Increase of the coercivity and decrease of L are more pronounced below the eutectoid concentration. The coercivity of the nanostructured samples is higher than that of the as-cast alloys. Due to the pinning of domain walls by the cementite particles, the hysteresis loop in the coarse-grained alloys both in as-cast and annealed states has a narrowing near the zero magnetization.     

Interaction of 1-allyl-3-methyl-imidazolium chloride and carbon black and its influence on carbon black filled rubbers

The interactions of the ionic liquid 1-allyl-3-methyl-imidazolium chloride (AMIMCl) with different grades of carbon black have been investigated using rheological measurements, differential scanning calorimetry and Raman spectroscopy. We could prove strong attractive interactions of AMIMCl with the carbon black surface, which result, for example, in the formation of an AMIMCl–carbon black–bucky gel and in an increased glass transition temperature of the ionic liquid in the presence of carbon black. Raman spectroscopy revealed that the AMIMCl is preferably attached to the edges of graphitic crystals at the carbon black surface, which have the highest adsorption energies. A surface treatment of different grades of carbon black with AMIMCl led to significant changes of the mechanical and electrical properties of different rubber compounds filled with carbon black, which can be attributed to a decreased filler–polymer interaction and a local plasticising effect of the AMIMCl at the carbon black surface.     

Rapid Sample Preparation for Molecular Biological Food Analysis Based on Magnesium Chloride

The prerequisites of rapid and reliable direct quantification of foodborne pathogens deem prior sample preparation a necessity. This study describes a new system for the modular and rapid (3 h) sample preparation method “Matrix-Lysis” for the quantification of Listeria monocytogenes and Salmonella typhimurium from food. In this study a new chemical concept is introduced for Matrix-Lysis, based on solubilization of proteins through the preferential interaction with MgCl₂. The results of this study show that the new system has many advantages compared to the previously described Matrix-Lysis systems, both regarding the performance of the whole method as well as the chemistry employed for solubilization of the foodstuffs. Artificial contamination experiments showed average recovery rates of 82 % for S. typhimurium and 73 % for L. monocytogenes from several foodstuffs with detection limits <10 CFU/g. Examination of naturally contaminated acid curd cheese samples, from a recent L. monocytogenes outbreak in Austria and Germany, with the new buffer system resulted in 100 % relative accuracy, 100 % relative specificity, and 100 % relative sensitivity compared to the ISO 11290-1 standard method. The results demonstrate the excellent applicability of Matrix-Lysis as sample preparation for the direct quantification of foodborne pathogens with molecular biological, as well as microbiological methods and the new chemical concept described enables the widespread use of this method for routine applications.     

Intrapersonal and interpersonal risk factors for peer victimization in immigrant youth in Finland.

This study (a) compared native Finns and immigrant children with respect to different forms of peer victimization and (b) tested whether intrapersonal (e.g., depression) and interpersonal (e.g., peer rejection) risk factors help to explain the association between immigrant status and peer victimization. The sample was drawn from the first phase of a large intervention evaluation project, KiVa, in Finland, composed of 4,957 native Finns (51% girls), 146 first-generation immigrants (48% girls), and 310 second-generation immigrants (53% girls) 9 to 12 years of age. The concurrent data included self- and peer reports collected via Internet-based questionnaires. Compared with native youth, first- and second-generation immigrants were more often targets of both peer- and self-reported victimization. Both immigrant groups experienced higher levels of physical, racist, and sexual victimization than natives. Furthermore, second-generation immigrants reported higher levels of property damage, threats, and cybervictimization than native Finns. Significant indirect effects were found between immigrant status and victimization. Interpersonal but not intrapersonal risk factors helped to explain these associations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Facile preparation of water-soluble fluorescent gold nanoclusters for cellular imaging applications

We report a facile strategy to synthesize water-soluble, fluorescent gold nanoclusters (AuNCs) in one step by using a mild reductant, tetrakis(hydroxymethyl)phosphonium chloride (THPC). A zwitterionic functional ligand, D-penicillamine (DPA), as a capping agent endowed the AuNCs with excellent stability in aqueous solvent over the physiologically relevant pH range. The DPA-capped AuNCs displayed excitation and emission bands at 400 and 610 nm, respectively; the fluorescence quantum yield was 1.3%. The effect of borohydride reduction on the optical spectra and X-ray photoelectron spectroscopy (XPS) results indicated that the AuNC luminescence is closely related to the presence of Au(I) on their surfaces. In a first optical imaging application, we studied internalization of the AuNCs by live HeLa cells using confocal microscopy with two-photon excitation. A cell viability assay revealed good biocompatibility of these AuNCs. Our studies demonstrate a great potential of DPA-stabilized AuNCs as fluorescent nanoprobes in bioimaging and related applications.     

Investigation of pre-structured GaAs surfaces for subsequent site-selective InAs quantum dot growth

In this study, we investigated pre-structured (100) GaAs sample surfaces with respect to subsequent site-selective quantum dot growth. Defects occurring in the GaAs buffer layer grown after pre-structuring are attributed to insufficient cleaning of the samples prior to regrowth. Successive cleaning steps were analyzed and optimized. A UV-ozone cleaning is performed at the end of sample preparation in order to get rid of remaining organic contamination.     

Complexes of Silver(I) Ions and Silver Phosphate Nanoparticles with Hyaluronic Acid and/or Chitosan as Promising Antimicrobial Agents for Vascular Grafts

Polymers are currently widely used to replace a variety of natural materials with respect to their favourable physical and chemical properties, and due to their economic advantage. One of the most important branches of application of polymers is the production of different products for medical use. In this case, it is necessary to face a significant disadvantage of polymer products due to possible and very common colonization of the surface by various microorganisms that can pose a potential danger to the patient. One of the possible solutions is to prepare polymer with antibacterial/antimicrobial properties that is resistant to bacterial colonization. The aim of this study was to contribute to the development of antimicrobial polymeric material ideal for covering vascular implants with subsequent use in transplant surgery. Therefore, the complexes of polymeric substances (hyaluronic acid and chitosan) with silver nitrate or silver phosphate nanoparticles were created, and their effects on gram-positive bacterial culture of Staphylococcus aureus were monitored. Stages of formation of complexes of silver nitrate and silver phosphate nanoparticles with polymeric compounds were characterized using electrochemical and spectrophotometric methods. Furthermore, the antimicrobial activity of complexes was determined using the methods of determination of growth curves and zones of inhibition. The results of this study revealed that the complex of chitosan, with silver phosphate nanoparticles, was the most suitable in order to have an antibacterial effect on bacterial culture of Staphylococcus aureus. Formation of this complex was under way at low concentrations of chitosan. The results of electrochemical determination corresponded with the results of spectrophotometric methods and verified good interaction and formation of the complex. The complex has an outstanding antibacterial effect and this effect was of several orders higher compared to other investigated complexes.