Role of number of consecutive voltage zero-crossings in propagation of water trees in polyethylene

Effects of superposition of a low-frequency (0.1 to 50 Hz) voltage and a high-frequency 2 kHz voltage on the growth of water trees in polyethylene are examined. It has become clear that both the number of total voltage zero-crossings during the whole voltage application period and the number of consecutive voltage zero-crossings in the instant of the polarity reversal of the low-frequency voltage play important roles in the length and shape of water trees. Namely, the water tree length becomes longer as the number of total zero-crossings increases. Furthermore, among the voltages with the same number of total zero-crossings, the length becomes even longer with a prolonged shape in the direction of electric field as the number of consecutive zero-crossings increases. Effects of superposition of a high-frequency voltage onto a dc voltage are also examined. In this case, the dc voltage seems not to have any influence to the tree growth. By assuming the presence of space charge around the water-tree tip, the effective zero-crossings become only sensitive to the high-frequency component. Therefore, this result also indicates that the number of voltage reversals at the tree tip plays a crucial role in the growth of water trees.     

Frequency characteristics of stiffness and damping effect of ferro fluid bearing

Damping characteristics and frequency characteristics of ferro fluid bearing (FFB) spindles were measured using a high-frequency vibration base driven by a piezo actuator. Using the high-frequency vibration base, high-frequency excitation was added to ferro fluid bearing spindles mounted on the vibration base, and it was proved that ferro fluid bearing spindles have effective damping. And the damping effect became larger with higher spindle rotational speed. Also we have measured spindle runout of a ferro fluid bearing spindle using a lock-in amplifier to increase S/N ratio and succeeded to measure nano meter order displacements.     

Phase transformation and interface segregation behavior in Si3N4 ceramics sintered with La2O3–Lu2O3 mixed additive

Microstructure and mechanical property of silicon nitride (Si₃N₄) ceramic are strongly dependent on the selection of sintering additives. When rare‐earth (RE) oxide is used as the sintering additive, segregation of RE ions at interface between Si₃N₄ grain and intergranular glassy film (IGF) is believed to play a critical role. Although the ionic radius of RE ion is known to be an empirical parameter to modify the mechanical property, the correlation between the segregated ions and their ionic radii is still under controversy. In order to address this issue, (i) rate of α‐β phase transformation and (ii) segregation behavior at the interface were studied for Si₃N₄ ceramics sintered using mixture of La₂O₃ and Lu₂O₃ as additives in this study. Specimens of Lu content 30% and higher exhibited lower activation energies for the α‐β phase transformation as compared with those of Lu content 20% and lower. In terms of the segregation behavior, La was preferably segregated at one site and Lu at the other site along β‐Si₃N₄/IGF interface in the specimens of Lu content 30% and higher. It is understood from these results that Lu segregation site should be more closely related with grain growth.     

Towards the improvement of thermal efficiency in lignite‐fired power generation: Concerning the utilization of Polish lignite deposits in state‐of‐the‐art IGCC technology

Integrated coal Gasification Combined Cycle (IGCC) is the most advanced technology for coal‐fired power generation. The two‐stage entrained flow gasification process allows for the use of a wide range of coal, as long as the gasification temperature is above the ash melting point of a used fuel. In this gasification technology, lignite, which often has a low ash melting point, can be preferably utilized. However, ash fluidity is also another importance, because the behaviour of molten slag can diminish a stable ash discharge from a gasifier. As the eligibility of coal ash properties is a considerable factor, water physically and chemically kept in lignite (30 – 60% in mass) attributes to deteriorating gasification efficiency, because it causes significant heat loss and increasing oxygen consumption. Developing a thermal evaporative lignite drying method will be a necessary attempt to apply lignite to the coal gasification process. For those preceded objectives, coal and ash properties and drying characteristics of several grades of Polish lignite, extracted from Belchatow and Turow deposits, have been experimentally investigated in a preliminary study evaluating the applicability and consideration for its utilization in state‐of‐the‐art clean coal technology, IGCC. This paper particularly discusses the eligibility of Polish lignite from the perspective of the fusibility and fluidity of ash melts and the fundamental drying kinetics of lignite in superheated steam in the light of water removal. The viscosity of ash melts is measured at high temperature up to 1700 °C. In the drying tests, the significant influence of structural issues, because of the provenance and origin of lignite on the drying characteristics, was found by applying the method of sensitivity analysis of physical propensity. This paper concludes that the investigated Polish lignite has characteristics favourable for utilization in IGCC technology, once the precautions related to its high moisture have been carefully addressed. Copyright © 2016 John Wiley & Sons, Ltd.     

Evaluation of Two Sets of Sorghum Bagasse Samples as the Feedstock for Fermentable Sugar Recovery via the Calcium Capturing by Carbonation (CaCCO) Process

Abstract: Sorghum bagasse samples from two sets (n6 and bmr6; n18 and bmr18) of wild-type and corresponding “brown midrib” (bmr) mutant strains of sweet sorghum were evaluated as the feedstock for fermentable sugar recovery via the calcium capturing by carbonation (CaCCO) process, which involves Ca(OH)₂ pretreatment of bagasse with subsequent neutralization with CO₂ for enzymatic saccharification. Saccharification tests under various pretreatment conditions of the CaCCO process at different Ca(OH)₂ concentrations, temperatures or residence periods indicated that bmr strains are more sensitive to the pretreatment than their counterparts are. It is expected that variant bmr6 is more suitable for glucose recovery than its wild-type counterpart because of the higher glucan content and better glucose recovery with less severe pretreatment. Meanwhile, bmr18showed higher scores of glucose recovery than its counterpart did, only at low pretreatment severity, and did not yield higher sugar recovery under the more severe conditions. The trend was similar to that of xylose recovery data from the two bmr strains. The advantages of bmr strains were also proven by means of simultaneous saccharification and fermentation of CaCCO-pretreated bagasse samples by pentose-fermenting yeast strain Candida shehatae Cs 4R. The amounts needed for production of 1 L of ethanol from n6, bmr6, n18, and bmr18samples were estimated as 4.11, 3.46, 4.03, and 3.95 kg, respectively. The bmr strains seem to have excellent compatibility with the CaCCO process for ethanol production, and it is expected that integrated research from the feedstock to bioprocess may result in breakthroughs for commercialization.