Immediate-type heat urticaria: report of a case and study of plasma histamine release

We report a 68-year-old man who had immediate-type heat urticaria with systemic symptoms. Immersing his hand in water at 42 degrees C (heat challenge test) produced an urticarial response, with an increase in the plasma histamine level from 0.26 to 7.64 ng/mL. Administration of oral antihistamines alone did not suppress either the urticarial response or the increase in plasma histamine. However, a combination of antihistamines and desensitization improved the skin lesions and reduced the plasma histamine level. The heat challenge test subsequently provoked a negative response and there was no increase in plasma histamine level 3 months after starting the combination therapy. These results indicate that the histamine level reflected the result of the heat challenge test and the amelioration of the skin eruption.     

Changes in microflora of the cloaca and oviduct of hens after intracloacal or intravaginal inoculation with Salmonella enteritidis

Quantitative and qualitative microbiological examination was carried out on cloacal and oviductal contents pre- and postinfection with Salmonella enteritidis (SE) intracloacally or intravaginally. Before inoculation with SE, the means +/- standard deviation (SD) of total bacterial counts, anaerobic bacterial counts, and aerobic bacterial counts in the cloaca were log10 7.7 +/- 0.7, 7.4 +/- 0.2, and 6.9 +/- 0.8 colony-forming units (CFU)/g, respectively. The predominant bacteria were Bacteroidaceae, Lactobacillus, and Escherichia coli. Before inoculation with SE, the means +/- SD of total bacterial counts, anaerobic bacterial counts, and aerobic bacterial counts in the vagina were log10 5.7 +/- 1.4, 5.5 +/- 1.3, and 3.6 +/- 2.7 CFU/g, respectively. Bacteroidaceae and Lactobacillus were predominant. Following inoculation with SE, only the cloacal population of Lactobacillus in hens inoculated intracloacally was significantly increased compared to that before the inoculation. Other indigenous microflora were stable even after the inoculation. In the uterus, very few bacteria, Lactobacillus and Staphylococcus, were isolated. Five of 20 eggs (25%) from hens inoculated with SE intravaginally were positive for SE, whereas no SE was recovered from 22 eggs in hens inoculated with SE intracloacally. SE was recovered from the uterus after intravaginal inoculation with SE and from the vagina after intracloacal inoculation with SE. Contamination may ascend from the cloaca into the lower parts of the oviduct and subsequently contaminated eggs may occur.     

Collagen and elastin synthesis by desmoid tumor in vitro

In order to characterize human desmoid tumors in vitro, the production of collagen and elastin and the expression of collagen types alpha1(I), alpha1(III) and transforming growth factor (TGF)-beta1 mRNA were investigated in six desmoid tumors; five derived from familial adenomatous polyposis patients and one from a sporadic case. The proportion of collagen production to total protein production was determined by 3H-imino acid incorporation, an indicator of collagen synthesis, using high-performance liquid chromatography (HPLC). The proportion of collagen production to total protein production was much higher in all six desmoid tumors compared with human skin fibroblasts (HSF). Quantitatively, the rate of elastin synthesis in desmoid tumor cells monitored by valine-proline peptide was also significantly higher than in HSF. Pro-alpha1(I) collagen mRNA was highly expressed in both desmoid tumors and HSF at approximately the same level, whereas pro-alpha1(III) collagen mRNA was more abundant in some of the desmoid tumors than the normal skin fibroblastic cell lines. Tumor growth factor-beta1 mRNA, which is believed to stimulate collagen synthesis, was expressed in both desmoid tumors and HSF to the same extent. These results demonstrate the increased formation of collagen and elastin in desmoid tumors in vitro and suggest that the increased synthesis of elastin rather than of collagen and TGF-beta1 may be involved in increased fibrogenesis by desmoid tumors.     

Effect of tylosin tartrate on humoral immune responses in chickens

This article examines the 50-year struggle of osteopathic physicians to gain entry into the US Military Medical Corps on the same basis as allopathic physicians. The author explores various arguments put forth by both physician groups, as well as those arguments presented by the respective surgeons general and relevant government officials.     

Random-coiled conformation of polypeptide chains

Summary Random-coiled conformation of poly(L-leucine), which has -branched side-chain, was theoretically analyzed by a conformational energy calculation based on intra-residue interactions. Calculated characteristic ratio 7.62 was obtained by using the transformation matrix statistically averaged over the entire side-chain conformational space of L-Leu residue. This value is smaller than those of poly(L-phenylalanine) (11.24) and poly(L-tyrosine) (12.33) which have -branched side-chain.     

Magnetic field detection for current evaluation by magnetic force microscopy

A current measurement method through magnetic field detection by magnetic force microscopy was proposed and demonstrated. We observed the magnetic field induced by an AC below 2.2 μA around a GaAs/AlGaAs mesa stripe. To achieve high sensitivity in magnetic field detection, we tuned the AC bias frequency to the torsional resonant frequency of the cantilever. As a result, the sensitivity of the magnetic field detection was much improved and specific features of the magnetic field around the mesa stripe were clearly observed at a current in sub-μA range.     

Analytical electron microscopy and electron holography on microstructures and magnetic domain structures of Sm-Co 2:17 magnets

Microstructures and magnetic domain structures of precipitation-hardened Sm-Co permanent magnets were systematically investigated by analytical electron microscopy and electron holography. By an elemental mapping method with energy-dispersive X-ray spectroscopy, the change in the local distribution of additive elements, i.e. Cu, Fe and Zr, in Sm-Co magnets with various heat treatments was visualized and the enrichment of Zr in the Z-phase with a width of approximately 1 nm was clarified directly. Detailed analysis with electron holography revealed that considerable fluctuation in the distribution of lines of magnetic flux in the step-aged magnet was due to the chemical partitioning of additives and resulted in magnetic hardening during the magnetization process.     

Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material

A molecularly imprinted polymer with immobilized Au nanoparticles (Au-MIP) is reported as a novel type of sensing material. The sensing mechanism is based upon the variable proximity of the Au nanoparticles immobilized in the imprinted polymer, which exhibits selective binding of a given analyte accompanied by swelling that causes a blue-shift in the plasmon absorption band of the immobilized Au nanoparticles. Using adrenaline as the model analyte, it was shown that molecular imprinting effectively enhanced the sensitivity and selectivity, and accordingly, Au-MIP selectively detects the analyte at 5 microM. The combination of molecular imprinting and the Au nanoparticle-based sensing system was shown to be a general strategy for constructing sensing materials in a tailor-made fashion due to wide applicability of the imprinting technique and the independence of the sensing mechanism from the analyte recognition system.     

Simple and comprehensive two-dimensional reversed-phase HPLC using monolithic silica columns

Simple and comprehensive two-dimensional (2D)-HPLC was studied in a reversed-phase mode using monolithic silica columns for second-dimension (2nd-D) separation. Every fraction from the first column, 15 cm long (4.6-mm i.d.), packed with fluoroalkylsilyl-bonded (FR) silica particles, was subjected to the separation in the 2nd-D using one or two octadecylsilylated (C(18)) monolithic silica columns (4.6-mm i.d., 3 cm). Monolithic silica columns in the 2nd-D were eluted at a flow rate of up to 10 mL/min with separation time of 30 s that meets the fractionation every 15-30 s at the first dimension (1st-D) operated at a flow rate of 0.4-0.8 mL/min. Three cases were studied. (1) In the simplest scheme of 2D-HPLC, effluent of the 1st-D was directly loaded into an injector loop of 2nd-D HPLC for 28 s, and 2 s was allowed for injection. (2) Two six-port valves each having a sample loop were used to hold the effluent of the 1st-D alternately for 30 s for one 2nd-D column to effect comprehensive 2D-HPLC without the loss of 1st-D effluent. (3) Two monolithic silica columns were used for 2nd-D by using a switching valve and two sets of 2nd-D chromatographs separating each fraction of the 1st-D effluent with the two 2nd-D columns alternately. In this case, two columns of the same stationary phase (C(18)) or different phases, C(18) and (pentabromobenzyloxy)propylsilyl-bonded (PBB), could be employed at the 2nd-D, although the latter needed two complementary runs. The systems produced peak capacity of approximately 1000 in approximately 60 min in cases 1 and 2 and in approximately 30 min in case 3. The three stationary phases, FR, C(18), and PBB, showed widely different selectivity from each other, making 2D separations possible. The simple and comprehensive 2D-HPLC utilizes the stability and high efficiency at high linear velocities of monolithic silica columns.