Partially biobased polyamphiphile-bearing reactive epoxy groups in the side chains and its application to the hydrogel

Partially biobased polyamphiphile-bearing reactive epoxy groups in the side chains were obtained in 62–78 % yields by a radical copolymerization of limonene oxide (LO) and PEG methylacrylate (PEGA) with different feed ratios. Degree of LO incorporation into the copolymer was determined as 12–23 % by ¹H NMR spectroscopic analysis. The copolymer having LO unit:PEGA unit = 19:81 formed polymer associates in water, particle diameter of which was ranged mainly from 4 to 66 nm and hydrodynamic mean diameter was 12.3 nm. Its critical micelle concentration was determined as 0.53 g/L by fluorescence spectroscopic analysis. A cross-linking reaction of the epoxy groups in the side chains was conducted with 3.97 mol% (to the epoxy group) of branched poly(ethylene imine) as a cross-linker to give the corresponding hydrogel in 56 % yield. The hydrogel can absorb water as much as 13 times its own mass.     

Effect of wall wettability condition on drift-flux parameters in lead–bismuth two-phase flow in circular and annular bubble columns

Lead–bismuth two-phase flow in a cylindrical vessel and annulus was experimentally investigated by varying the surface wettability of the vessel wall. The test section used in this study was a cylindrical stainless vessel with/without inner sleeve to change the hydraulic diameter. Volume-averaged void fraction was measured by varying the surface wettability of the test section, which was enhanced by using a soldering flux. Measured void fraction was compared with existing two-phase flow correlations and with one-dimensional theoretical simulations assuming one-dimensional drift-flux model. From experimental results, measured distribution parameters of the lead–bismuth two-phase flow are much larger than that of ordinary two-phase flow regardless of the surface wettability. In the present work, the one-dimensional analysis was carried out for the cylindrical vessel to reproduce the distribution parameter. From the simulation results, predicted value for the cylindrical vessel showed good agreement with experimental results. However, in annulus, the distribution parameters in annulus were underestimated by the present model. It was suggested that, in case of annulus, steeper void fraction profile might be formed near the inner surface for poor wettability condition.     

Maize Transcription Factor ZmARF4 Confers Phosphorus Tolerance by Promoting Root Morphological Development

Plant growth and development are closely related to phosphate (Pi) and auxin. However, data regarding auxin response factors (ARFs) and their response to phosphate in maize are limited. Here, we isolated ZmARF4 in maize and dissected its biological function response to Pi stress. Overexpression of ZmARF4 in Arabidopsis confers tolerance of Pi deficiency with better root morphology than wild-type. Overexpressed ZmARF4 can partially restore the absence of lateral roots in mutant arf7 arf19. The ZmARF4 overexpression promoted Pi remobilization and up-regulated AtRNS1, under Pi limitation while it down-regulated the expression of the anthocyanin biosynthesis genes AtDFR and AtANS. A continuous detection revealed higher activity of promoter in the Pi-tolerant maize P178 line than in the sensitive 9782 line under low-Pi conditions. Meanwhile, GUS activity was specifically detected in new leaves and the stele of roots in transgenic offspring. ZmARF4 was localized to the nucleus and cytoplasm of the mesophyll protoplast and interacted with ZmILL4 and ZmChc5, which mediate lateral root initiation and defense response, respectively. ZmARF4 overexpression also conferred salinity and osmotic stress tolerance in Arabidopsis. Overall, our findings suggest that ZmARF4, a pleiotropic gene, modulates multiple stress signaling pathways, and thus, could be a candidate gene for engineering plants with multiple stress adaptation.     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

Role of brown adipose tissue in thermogenesis induced by overfeeding a diet containing medium chain triglyceride

The role of brown adipose tissue in the mechanism of medium chain triglyceride (MCT)-induced thermogenesis was investigated. Under anesthesia, the interscapular brown adipose tissue (IBAT) was excised in male Sprague-Dawley rats, and the animals were fitted with gastrostomy tubes. After a 10-day recovery period, the animals were divided into two groups: one group received a diet containing MCT as 50% of calories, and the other group received an isocaloric diet containing long chain triglyceride (LCT). The diets were fed for 6 wk at a level of calorie intake that was 150% of the ad libitum intake of a parallel control group. During the last week of the study, resting and norepinephrine (NE)-stimulated O₂ consumption and CO₂ production were measured in a Noyons diaferometer. At the end of 6 wk, the animals were weighed and killed. The individual fat pads were dissected and weighed, and an aliquot of the right retroperitoneal fat pad was used to measure adipocyte size and number. The results showed that body weight and adipocyte size (but not adipocyte number) were significantly smaller in the MCT-fed compared to the LCT-fed animals. Resting as well as maximal NE-stimulated oxygen consumption values were significantly higher in the MCT-fed than the LCT-fed rats. It is concluded that the enhanced thermogenesis induced by MCT persists despite the absence of IBAT and that the phenomenon is likely related to more extensive oxidation of MCT-in contrast to LCT-derived fatty acids, thus leading to increased oxygen consumption, enhanced dissipation of energy as heat and diminished efficiency of weight gain and deposition of body fat. Presented at the symposium on “Specialty Lipids and Their Biofunctionality” at the annual meeting of the American Oil Chemists' Society, Philadelphia, May 1985.     

Tensile strength of plasma-sprayed alumina and/or zirconia coatings on titanium

The heat treatment effect on the characteristics and tensile strength of plasma-sprayed alumina, yttria-stabilized zirconia (YSZ), and mixtures of alumina and YSZ coatings on titanium was investigated. The as-sprayed structures of alumina and YSZ coatings consists of a and y alumina phases, and cubic and tetragonal zirconia phases, respectively. The tensile strength of the coatings containing a large amount of YSZ is increased from 25 to 50 MPa by heat treatment at 800 °C. The 60% YSZ-AI₂O₃ coating showed the highest tensile strength. The tensile strength increase of the YSZ-containing coating by heat treatment is caused by formation of 10 to 100 nm wide microcracks. The interface adhesion strength between the heat-treated titanium substrate and the alumina-containing coating is increased by chemical reaction at the in-terface. Thus, a heat-treated alumina and zirconia mixture coating may be favorable in obtaining high tensile strength due to microcrack formation in the coating and the chemical reaction at the interface. During this work, S. Baba was a graduate student at Kyushu Institute of Technology, Sumitomo Metal Ind. Ltd., Osaka, Japan.     

Activation cross sections of the Yb(p,xn)Lu reaction for indirect production of the therapeutic radionuclide Yb

Activation cross sections of the ^natYb(p,xn)¹⁶⁹Lu reaction have been measured for the first time up to 70 MeV to investigate the production possibility of the radionuclide ¹⁶⁹Yb through decay of its parent ¹⁶⁹Lu. The cross sections were measured using the stacked foil irradiation technique and gamma spectrometry. The experimental data were compared with the results of the ALICE-IPPE theoretical model code. Different production routes were compared for the internal radiotherapy related radioisotope ¹⁶⁹Yb. Above 30 MeV proton energy the integral yield of the ^natYb(p,xn)¹⁶⁹Lu reaction is higher than that of the earlier investigated ¹⁶⁹Tm(p,n)¹⁶⁹Yb, ¹⁶⁹Tm(d,2n)¹⁶⁹Yb, ^natEr(α,xn)¹⁶⁹Yb, ^natYb(α,x)¹⁶⁹Lu and ^natHf(p,x)¹⁶⁹Lu reactions at the equivalent particle energies.     

Extraction equilibrium conditions of beryllium and aluminium from a beryl ore for optimal industrial beryllium compound production

This study examines the extraction of beryllium and aluminium from a Nigerian beryl ore using Cyanex®272 in kerosene from an aqueous sulphate pregnant solution. Parameters such as extractant concentration and equilibrium pH that dictates the extraction yield were studied. Under the following conditions: temperature 27?±?2°C, phase ratio 1?1, about 45.50 and 46.76% of beryllium and aluminium were extracted by 0.15?mol?L^?1 Cyanex®272 concentration within 30?min. However, the extraction yield of beryllium and aluminium was increased to 91.68% and 97.89% at equilibrium pH of 3 and 4, respectively, for beryllium and aluminium at 27?±?2°C. A 0.05?mol?L^?1 H₂SO₄ solution was found to be adequate for the stripping of about 99.00% Be and 95.40% Al from the loaded organic phase. The pure solutions containing metal ions were accordingly beneficiated to obtain beryllium and aluminium compounds of industrial values.