Ultra-high voltage electron microscopy: Past,present, and future

High voltage electron microscopy has shown numerous advantages for the study of natural science, including biology, but it is especially useful in materials science. The most important advantage for materials science is in-situ experiments on detailed processes of the same phenomena that occur in bulk materials. For such in-situ experiments, the specimens should be thicker than a few microns to observe the behavior of lattice effect. The maximum observable thickness of the specimens and other advantages markedly increase with increasing accelerating voltage, and since 1965, two 3 MV instruments have been installed. The present paper is mainly concerned with these 3 MV electron microscopes and their applications to new research fields.     

Macroscopic and microscopic changes in the surface layers of annealed and case-hardened steel rollers due to rolling contact

Measurements of the residual stress and observations of the microstructure at the surface and in the subsurface of rollers were performed during rolling contact fatigue tests of annealed 0.45% carbon steel and case-hardened nickel-chromium steel rollers. Compressive residual stresses in annealed rollers were induced by the rolling contact. With case-hardened rollers they were induced by heat treatment prior to the rolling contact fatigue tests. After the rolling contact fatigue tests the compressive residual stresses on the surface of the annealed rollers and in the subsurface of the case-hardened rollers relaxed; a characteristic substructure was formed by the stress cycles, which caused surface failure. It was confirmed that the microcracks leading to surface failure initiate on the surfaces of annealed rollers and in the subsurface of case-hardened rollers.     

Purification and characterization of a strong fibrinolytic enzyme (nattokinase) in the vegetable cheese natto, a popular soybean fermented food in Japan

A strong fibrinolytic enzyme (nattokinase) was purified from the vegetable cheese natto. Nattokinase was extracted from natto with saline and isolated by sequential use of hydrophobic chromatography on Butyl-Toyopearl, ion-exchange chromatography on CM-Toyopearl, and gel-filtration on Sephadex G-50. The isolated protein gave a single sharp band on SDS-PAGE either before or after reduction. The sequence, as determined by automated Edman degradation of the uncleaved molecule and its enzymatically derived peptide, consisted of a total 275 amino acid residues (M.W = 27,728) and exhibited a high homology with the subtilisins. The purified nattokinase digested not only fibrin but also several synthetic substrates. Among the synthetic substrates, the most sensitive substrate was Suc-Ala-Ala-Pro-Phe-pNA for subtilisin. PMSF inhibited both the fibrinolytic activity and the amidolytic activity. The results indicate that nattokinase is a subtilisin-like serine protease.     

How do tufted capuchin monkeys (Cebus apella) understand causality involved in tool use?

Four tufted capuchin monkeys (Cebus apella) were trained to choose from 2 hook-like tools, 1 of which successfully led to collecting food, whereas the other did not because of inappropriate spatial arrangement of the tool and the food. In Experiment 1, all of the monkeys successfully learned the basic task. The monkeys performed successfully with tools of novel colors and shapes in Experiments 2-5. These results demonstrate that the monkeys used the spatial arrangement of the tool and the food as a cue. However, they failed when there were obstacles (Experiment 6) or traps (Experiment 7) on the path along which she monkeys dragged tools. These results may suggest that capuchin monkeys understand the spatial relationship between 2 items, namely, food and. the tool, but do not understand the spatial relationship among 3 items, namely, food, tool, and the environmental condition. The possible role of stimulus generalization is also considered. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A record-linkage study on risk factors for cause-specific infant mortality

Infant death certificates were linked with birth certificates for infants born to residents of Tohoku, Tokai and Kyushu regions in 1989 (n = 409, 679, or about one-third of all births in Japan), to examine the effects of variables, as reported on birth certificates, on cause-specific infant mortality. "Certain conditions originating in the perinatal period" and "congenital anomalies" accounted for nearly 90 percent of neonatal deaths, while "congenital anomalies", "injuries and poisoning" and "sudden infant death" were responsible for about 65 percent of postneonatal deaths. Mortality rates for almost all causes of infant deaths, except injuries and poisonings, increased as birth weight decreased not only in the neonatal period but also in the postneonatal period. This suggests that low birth weight places some infants at higher risk of death, and conditions that lead to low birth weight independently contribute to the risk of infant death. Cox's proportional hazards linear model was used to assess the effects of variables on infant mortalities by causes of death. An extremely strong birth weight effect was noted for "certain conditions originating in the perinatal period" and "congenital anomalies". Being a male infant and late order of birth in multiparity were other risk factors for deaths from "congenital anomalies", while being a male infant, resident of Tohoku region and maternal stillbirth experience related to deaths from "certain conditions originating in the perinatal period". Elevated risks of sudden infant death syndrome (SIDS), of which mortality rate in Japan was considerably lower than those in most developed Western countries, i.e. 0.23 per 1,000 live births in 1989, were associated with low birth weight, being a male infant, low maternal age, late order of birth in multiparity and illegitimacy. Low maternal age, late order of birth in multiparity and illegitimacy, also, related significantly to increased risk of infant deaths for "injuries and poisoning". These results suggest the independent contributions of socioeconomic factors to infant mortality, especially postneonatal mortality, from SIDS, "injuries and poisonings".     

Crystallinity and electrical conductivity of sulfur-containing microcrystalline diamond thin film

Hydrogen sulfide (H₂S) was introduced into a microwave plasma chemical vapor deposition of microcrystalline diamond thin film. Secondary-ion mass spectroscopy showed that sulfur concentration was controlled from 2 × 10¹⁵ to 9 × 10¹⁷ cm^− 3 by controlling the H₂S/CH₄ ratio, while that of hydrogen concentration was around 5 × 10²⁰ cm^− 3 and was independent of the H₂S/CH₄ ratio. Electrical conductance increased linearly as the S concentration increased from 2 × 10¹⁵ to 3 × 10¹⁶ cm^− 3 without significant deterioration of film crystallinity, i.e., the amount of sp² phase did not increase. Non-ohmic conduction was converted to ohmic conduction when the S concentration reached 9 × 10¹⁷ cm^− 3 by increasing the H₂S/CH₄ ratio to 30,000 ppm. This modification was consistent to the formation of a graphitic phase by heavy S-doping, which was identified by Raman spectra and surface morphology.     

Domain–Specific High–Level Modeling and Synthesis for ATM Switch Prototyping

ATM switch, the core technology of an ATM networking system, is one of the major products in Fujitsu telecommunication business. However, current gate–level design methodology can no longer satisfy its stringent time–to–market requirement. It becomes necessary to exploit high–level methodology to specify and synthesize the design at an abstraction level higher than logic gates. This paper presents our prototyping experience on domain–specific high–level modeling and synthesis for Fujitsu ATM switch design. We propose a high–level design methodology using VHDL, where ATM switch architectural features are considered during behavior modeling, and a high–level synthesis compiler, MEBS, is prototyped to synthesize the behavior model down to a gate–level implementation. Since the specific ATM switch architecture is incorporated into both modeling and synthesis phases, a high–quality design is efficiently derived. The synthesis results shows that given the design constraints, the proposed high–level design methodology can produce a gate–level implementation by MEBS with about 15 percent area reduction in shorter design cycle when compared with manual design.     

Analgesic Effect of Tranilast in an Animal Model of Neuropathic Pain and Its Role in the Regulation of Tetrahydrobiopterin Synthesis

Trigeminal neuralgia is unilateral, lancinating, episodic pain that can be provoked by routine activities. Anticonvulsants, such as carbamazepine, are the drugs of choice; however, these possess side-effects. Microvascular decompression is the most effective surgical technique with a higher success rate, although occasionally causes adverse effects. The potential treatment for this type of pain remains unmet. Increased tetrahydrobiopterin (BH4) levels have been reported in association with axonal injury. This study aimed to evaluate the effect of tranilast on relieving neuropathic pain in animal models and analyze the changes in BH4 synthesis. Neuropathic pain was induced via infraorbital nerve constriction. Tranilast, carbamazepine, or saline was injected intraperitoneally to assess the rat’s post-intervention pain response. In the von Frey’s test, the tranilast and carbamazepine groups showed significant changes in the head withdrawal threshold in the ipsilateral whisker pad area. The motor coordination test showed no changes in the tranilast group, whereas the carbamazepine group showed decreased performance, indicating impaired motor coordination. Trigeminal ganglion tissues were used for the PCR array analysis of genes that regulate the BH4 pathway. Downregulation of the sepiapterin reductase (Spr) and aldoketo reductase (Akr) genes after tranilast injection was observed compared to the pain model. These findings suggest that tranilast effectively treats neuropathic pain.