Association and physical gelation of ABA triblock copolymer in selective solvent

Association behavior and physical gelation mechanism of ABA triblock copolymer dissolved in B-selective solvent have been studied systematically from dilute to moderately concentrated solutions. Static and dynamic light scattering and nuclear magnetic resonance measurements for dilute solutions of poly(methyl methacrylate)-block-poly(tert-butyl acrylate)-block-poly(methyl methacrylate) (PMMA-PtBuA-PMMA) in 1-butanol (PtBuA selective solvent) indicated that PMMA-PtBuA-PMMA chains are molecularly dissolved above 50 °C. With decreasing temperature, the triblock copolymers form associated micelles consisting PMMA associated core and PtBuA shell. Linear dynamic viscoelastic measurements for solutions with moderate concentration (3.9-12.0 wt%) revealed that the system was viscous sol state at 60 °C. Drastic increase of shear storage modulus (G′) occurred with decreasing temperature, and at 25 °C, G′ showed rubbery plateau with weak frequency dependency, means the formation of elastic physical gel. The consistency between the temperature for micelle formation and that at the increase in G′ indicates that the physical gelation is owing to the network formation as the result of the association of PMMA chains and the bridging PtBuA chains connecting the PMMA cores. Master curves for the dynamic moduli were derived by time-temperature superposition along the frequency axis. Just above sol-gel transition concentration (C_gel), the master curves suggest the existence of fairy amount of aggregate that is not incorporated in the macroscopic network. With the increase in polymer concentration, the master curves become to reveal Maxwell-type viscoelasticity with narrow relaxation time distribution, suggesting the formation of transient network with easily generation and destruction of crosslinks. Concentration dependency of the plateau modulus is stronger than the theoretically expected, means the macroscopic transient network grows with polymer concentration by increasing the fraction of elastically effective bridging PtBuA chain above C_gel.     

Tensile fatigue of a laminated carbon-carbon composite at room temperature

The tensile fatigue behavior of a cross-ply carbon-carbon (C/C) laminate was examined at room temperature. Tension-tension cyclic fatigue tests were conducted under load control at a sinusoidal frequency of 10 Hz to obtain stress-fracture cycles (S-N) relationship. The fatigue limit of the C/C was found to be 213 MPa (93% of the tensile strength), and no fracture was observed at over 10⁴ cycles. The residual tensile strength of specimens that survived fatigue loading was enhanced with increase in fatigue cycles and applied stress. Observations of the fatigue-loaded specimens revealed that the formation of micro-cracks at the fiber-matrix interfaces was facilitated during fatigue loading. These interfacial cracks were concluded to protect the fibers from being damaged by matrix cracks and this behavior was considered to be the governing mechanism of strength enhancement by fatigue loading.     

Hydrogenation of nitro compounds with supported platinum catalyst in supercritical carbon dioxide

Hydrogenation of a series of substituted nitro compounds such as 2-,3-,4-nitroanisole, 2-,3-,4-nitrotoluene, 2,4-dinitrobenzene and 2,4-dinitrotoluene has been studied in supercritical carbon dioxide, scCO₂ (two phases), and ethanol (three phases) with a 5 wt.% carbon supported platinum catalyst. The solubility of these compounds in scCO₂ has also been examined in the presence and absence of hydrogen. The solubility of those nitro compounds increases with increasing CO₂ pressure but decreases with the presence of hydrogen. The solubility is in the order of nitrotoluene > nitroanisole > dinitrotoluene, dinitrobenzene. Although the total conversion obtained with hydrogenation in scCO₂ is similar to that in ethanol, the selectivity to amino products is higher in the former reaction medium, indicating that scCO₂ is an ideal medium for the production of amino compounds with hydrogenation of nitro substrates using conventional supported metal catalysts.     

Ursodeoxycholic Acid Suppresses Lipogenesis in Mouse Liver: Possible Role of the Decrease in β-Muricholic Acid,a Farnesoid X Receptor Antagonist

The farnesoid X receptor (FXR) is a major nuclear receptor of bile acids; its activation suppresses sterol regulatory element-binding protein 1c (SREBP1c)-mediated lipogenesis and decreases the lipid contents in the liver. There are many reports showing that the administration of ursodeoxycholic acid (UDCA) suppresses lipogenesis and reduces the lipid contents in the liver of experimental animals. Since UDCA is not recognized as an FXR agonist, these effects of UDCA cannot be readily explained by its direct activation of FXR. We observed that the dietary administration of UDCA in mice decreased the expression levels of SREBP1c and its target lipogenic genes. Alpha- and β-muricholic acids (MCA) and cholic acid (CA) were the major bile acids in the mouse liver but their contents decreased upon UDCA administration. The hepatic contents of chenodeoxycholic acid and deoxycholic acid (DCA) were relatively low but were not changed by UDCA. UDCA did not show FXR agonistic or antagonistic potency in in vitro FXR transactivation assay. Taking these together, we deduced that the above-mentioned change in hepatic bile acid composition induced upon UDCA administration might cause the relative increase in the FXR activity in the liver, mainly by the reduction in the content of β-MCA, a farnesoid X receptor antagonist, which suggests a mechanism by which UDCA suppresses lipogenesis and decreases the lipid contents in the mouse liver.     

Increased Lipid Synthesis and Decreased β-Oxidation in the Liver of SHR/NDmcr-cp (cp/cp) Rats, an Animal Model of Metabolic Syndrome

SHR/NDmcr-cp (cp/cp) rats (SHR/NDcp) are an animal model of metabolic syndrome. A previous study of ours revealed drastic increases in the mass of palmitic (16:0), oleic (18:1n-9), palmitoleic (16:1n-7), cis-vaccenic (18:1n-7) and 5,8,11-eicosatrienoic acids in the liver of SHR/NDcp. However, detailed information on the class of lipid accumulated and the mechanism responsible for the overproduction of the accumulated lipid in the liver was not obtained. This study aimed to characterize the class of lipid accumulated and to explore the mechanism underlying the lipid accumulation in the liver of SHR/NDcp, in comparison with SHR/NDmcr-cp (+/+) (lean hypertensive littermates of SHR/NDcp) and Wistar Kyoto rats. In the liver of SHR/NDcp, de novo synthesis of fatty acids (16:0, 18:1n-9 and 16:1n-7) and triacylglycerol (TAG) synthesis were up-regulated and fatty acid β-oxidation was down-regulated. These perturbations of lipid metabolism caused fat accumulation in hepatocytes and accumulation of TAG, which were enriched with 16:0, 18:1n-9 and 16:1n-7, in the liver of SHR/NDcp. On the other hand, no changes were found in hepatic contents of diacylglycerol and unesterified fatty acid (FFA); among FFA, there were no differences in the hepatic concentrations of unesterified 16:0 and stearic acid between SHR/NDcp and two other groups of rats. Moreover, little change was brought about in the expression of genes responsive to endoplasmic reticulum stress in the liver of SHR/NDcp. These results may reinforce the pathophysiological role of stearoyl-CoA desaturase 1 and fatty acid elongase 6 in the liver of SHR/NDcp.     

Catalytic Behavior of Bis(Pyrrolide-Imine) and Bis(Phenoxy-Imine) Titanium Complexes for the Copolymerization of Ethylene with Propylene, 1-Hexene,or Norbornene

This contribution reports the catalytic behavior of bis(pyrrolide-imine)Ti complexes 1 and 2 , [2-(RNCH)-C₄H₃N]₂TiCl₂ ( 1 , R = Ph; 2 , R = cyclohexyl), and bis(phenoxy-imine)Ti complex 3 , [2-(Ph-NCH)-3-t Bu-C₆H₃O]₂TiCl₂ for the copolymerization of ethylene with propylene, 1-hexene, or norbornene. An inspection of the X-ray structures of complexes 1–3 suggested that complexes 1 and 2 with pyrrolide-imine ligands would provide more space for olefin polymerization than complex 3 with phenoxy-imine ligands. In addition, DFT calculations also showed that active species derived from complexes 1 and 2 possess higher electrophilicity of the Ti center compared to that from complex 3 . Complexes 1 and 2 on activation with methylalumoxane (MAO) had higher affinity for propylene and 1-hexene and incorporated higher amounts of propylene ( 1 ; 30.5 mol%, 2 ; 23.4 mol%) and 1-hexene ( 1 ; 1.9 mol%, 2 ; 1.7 mol%) than complex 3 (propylene; 4.5 mol%, 1-hexene; 0.4 mol%). The incorporation levels of propylene and 1-hexene displayed by complexes 1 and 2 were lower than those for Cp₂TiCl₂ (propylene; 41.6 mol%, 1-hexene; 5.1 mol%) under identical conditions. In contrast, complexes 1 and 2 exhibited higher incorporation ability for norbornene and produced copolymers with much higher norbornene contents ( 1 ; 32.0 mol%, 2 ; 26.5 mol%) than Cp₂TiCl₂ (1.2 mol%) under the same conditions. Additionally, complex 3 also promoted higher norbornene incorporation (4.3 mol%) than Cp₂TiCl₂ and provided a copolymer with extremely narrow molecular weight distribution (M_w/M_n 1.14). A correlation exists between electrophilicity of the Ti center in active species and norbornene incorporation.     

Candidate Biomarkers for Genetic and Clinicopathological Diagnosis of Endometrial Cancer

The recent increase in the frequency of endometrial cancer has emphasized the need for accurate diagnosis and improved treatment. The current diagnosis is still based on conventional pathological indicators, such as clinical stage, tumor differentiation, invasion depth and vascular invasion. However, the genetic mechanisms underlying endometrial cancer have gradually been determined, due to developments in molecular biology, leading to the possibility of new methods of diagnosis and treatment planning. New candidate biomarkers for endometrial cancer include those for molecular epigenetic mutations, such as microRNAs. These biomarkers may permit earlier detection of endometrial cancer and prediction of outcomes and are likely to contribute to future personalized therapy for endometrial cancer.     

Radiation detector made of a high-quality polycrystalline diamond

Radiation detector was made of a high-quality CVD polycrystalline diamond composed of frost column like structure diamond grains, and induced charge distribution spectra and drift velocities were measured by using alpha particles. As a result, the CVD polycrystalline achieved maximum induced charge of 83% of HP/HT type IIa diamond. Moreover, the CVD crystal had lower charge loss on electrons compared with the HP/HT type IIa diamond. Drift velocities of electrons and holes were v_e = 7.7 × 10⁴ and v_h = 7.3 × 10⁴cm/s at an electric field of 20 kV/cm, respectively. In addition, response function measurement for 14 MeV neutrons was carried out.     

Superstructure and mechanical properties of poly(L-lactic acid) microfibers prepared by CO2 laser-thinning

Poly(L-lactic acid) (PLLA) microfibers were obtained by a carbon dioxide (CO₂) laser-thinning method. A laser-thinning apparatus used to continuously prepare microfibers was developed in our laboratory; it consisted of spools supplying and winding the fibers, a continuous-wave CO₂-laser emitter, a system supplying the fibers, and a traverse. The laser-thinning apparatus produced PLLA microfibers in the range of 100-800 m min⁻¹. The diameter of the microfibers decreased as the winding speed increased, and the birefringence increased as the winding speed increased. When microfibers, obtained through the laser irradiation (at a laser power of 8.0 W cm⁻²) of the original fiber supplied at 0.4 m min⁻¹, were wound at 800 m min⁻¹, they had a diameter of 1.37 μm and a birefringence of 24.1×10⁻³. The draw ratio calculated from the supplying and winding speeds was 2000×. The degree of crystal orientation increased with increasing the winding speed. Scanning electron microscopy showed that the microfibers obtained with the laser-thinning apparatus had smooth surfaces not roughened by laser ablation that were uniform in diameter. The PLLA microfiber, which was obtained under an optimum condition, had a Young's modulus of 5.8 GPa and tensile strength of 0.75 GPa.