Equilibrium and kinetic studies of selective adsorption and separation for strontium using DtBuCH18C6 loaded resin

A crown ether loaded resin was prepared by successive impregnation and fixing the 4′,4′(5″)-di(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) and its molecule modifier, 1-dodecanol, onto the porous silica/polymer composite support (SiO₂-P particles). The characterization of DtBuCH18C6 loaded resin was examined by thermal gravimetry and differential thermal analysis and electron probe microanalysis. The adsorption behavior of Sr(II), Cs(I), Ru(III), Pd(II), La(III), Nd(III), Sm(III), Gd(III), Zr(IV), and Mo(VI) was investigated by the batch method. Furthermore, the column test for Sr (II) was performed. The batch experiments were carried out by varying the shaking times, HNO₃ concentration, and initial concentration of metal ions. A relatively large K _d value above 182 cm³/g for Sr(II) was obtained in the presence of 3 M HNO₃. In contrast, the K _d values of Cs(I), Ru(III), Pd(II), La(III), Nd(III), Sm(III), Gd(III), Zr(IV), and Mo(VI) were considerably lower than 10 cm³/g. The adsorption of Sr(II) was found to be controlled by chemisorption mechanism, and followed a Langmuir-type adsorption equation. The breakthrough curve of Sr(II) had S-shaped profile, and the elution percentage was estimated to be 99.9% by using the eluent of H₂O.     

Advanced resonance self-shielding method for gray resonance treatment in lattice physics code GALAXY

A new resonance self-shielding method based on the equivalence theory is developed for general application to the lattice physics calculations. The present scope includes commercial light water reactor (LWR) design applications which require both calculation accuracy and calculation speed. In order to develop the new method, all the calculation processes from cross-section library preparation to effective cross-section generation are reviewed and reframed by adopting the current enhanced methodologies for lattice calculations. The new method is composed of the following four key methods: (1) cross-section library generation method with a polynomial hyperbolic tangent formulation, (2) resonance self-shielding method based on the multi-term rational approximation for general lattice geometry and gray resonance absorbers, (3) spatially dependent gray resonance self-shielding method for generation of intra-pellet power profile and (4) integrated reaction rate preservation method between the multi-group and the ultra-fine-group calculations. From the various verifications and validations, applicability of the present resonance treatment is totally confirmed. As a result, the new resonance self-shielding method is established, not only by extension of a past concentrated effort in the reactor physics research field, but also by unification of newly developed unique and challenging techniques for practical application to the lattice physics calculations.     

Effect of wall wettability condition on drift-flux parameters in lead–bismuth two-phase flow in circular and annular bubble columns

Lead–bismuth two-phase flow in a cylindrical vessel and annulus was experimentally investigated by varying the surface wettability of the vessel wall. The test section used in this study was a cylindrical stainless vessel with/without inner sleeve to change the hydraulic diameter. Volume-averaged void fraction was measured by varying the surface wettability of the test section, which was enhanced by using a soldering flux. Measured void fraction was compared with existing two-phase flow correlations and with one-dimensional theoretical simulations assuming one-dimensional drift-flux model. From experimental results, measured distribution parameters of the lead–bismuth two-phase flow are much larger than that of ordinary two-phase flow regardless of the surface wettability. In the present work, the one-dimensional analysis was carried out for the cylindrical vessel to reproduce the distribution parameter. From the simulation results, predicted value for the cylindrical vessel showed good agreement with experimental results. However, in annulus, the distribution parameters in annulus were underestimated by the present model. It was suggested that, in case of annulus, steeper void fraction profile might be formed near the inner surface for poor wettability condition.     

Methodology to optimize radiation protection in radioactive waste disposal after closure of a disposal facility based on probabilistic approach

We propose a methodology to optimize radiation protection in radioactive waste disposal after the closure of a disposal facility based on a probabilistic approach. In this methodology, a set of alternative options of the disposal system design with the associated uncertainties estimated through a probabilistic approach are developed. Then, the methodology evaluates the advantages and disadvantages of each option for the optimization of radiation protection, in which it is possible to determine the compliance with a dose constraint of 0.3 mSv/y and to collect information for making a decision on the optimization. In particular, the obtained information on the exposure, which is the mode and width of the dose distribution, can be converted into information on engineering measures and site conditions for the options. This process allows us to discuss which option should be selected as the optimal option by considering the balance between the exposure and the engineering, economic, and social feasibility of the option. This methodology is helpful for providing clear reasons why an optimal disposal system design is selected by combining quantitative information on the exposure and the feasibility of each option.     

具有缺陷和应力限值的预应力钢支撑柱屈曲性能

通过预应力支撑加固的钢柱,一般增加了轴向抗压强度。过去,十分强调获得更高的临界屈曲荷载,然而,后屈曲性能是结构安全性和功能的重要保证。对具有几何缺陷和与可能的材料失效相关的应力极限的支撑柱的屈曲性能进行检验。考虑有几何缺陷支撑柱的屈曲性能,采用Rayleigh-Ritz方法对几何非线性模型公式化,并通过有限元方法进行验证。研究显示：对于承受最高临界荷载的预应力状态,系统对有几何缺陷的柱更为敏感。对某一给定形状结构,实际的最大荷载似乎随着预应力的增加而增加。研究建议：最佳的预应力取值应该大于基于传统方法的线性分析的结果。     

Unit commitment scheduling by Lagrange relaxation method taking into account transmission losses

Since the application of the Lagrange relaxation method to the unit commitment scheduling by Muckstadt in 1979, many papers using this method have been published. The greatest advantage of applying the Lagrange relaxation method for the unit commitment problem is that it can relax (ignore) each generator's output dependency caused by the demand–supply balance constraint so that a unit commitment of each generator is determined independently by dynamic programming. However, when we introduce the transmission loss into the demand–supply balance constraint, we cannot decompose the problem into the partial problems in which each generator's unit commitment is determined independently and have to take some measures to obtain an optimal schedule by the Lagrange relaxation method directly. In this paper, we present an algorithm for the unit commitment schedule using the Lagrange relaxation method for the case of taking into account transmission losses. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(4): 27–33, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20119     

Fabrication of dense β-calcium orthophosphate with submicrometer-sized grains and its high-temperature superplastic deformation

High-density β-calcium orthophosphate (β-Ca₃(PO₄)₂, also called β-tricalcium phosphate: β-TCP) ceramics with submicrometer-sized grains were fabricated using a pulse-current pressure firing route. The maximum relative density of the β-TCP compacts was 98.7% at 1050 °C and this was accompanied by a translucent appearance. The mean grain size of the β-TCP compacts increased slightly with temperature to reach 0.78 μm at 1000 °C. However, upon further increasing the firing temperature to 1050 °C the mean grain size increased significantly to 1.6 μm. The extent of plastic deformation during tensile testing was examined at temperatures between 900 and 1100 °C using a strain rate in the range 9.26 × 10⁻⁵ to 4.44 × 10⁻⁴ s⁻¹. The maximum tensile strain achieved was 145% for a test temperature of 1000 °C and strain rate of 1.48 × 10⁻⁴ s⁻¹ and this was attributed to the relatively high density and small grain size.     

A Dietary Oxysterol, 7-Ketocholesterol,Exacerbates Imiquimod-Induced Psoriasis-like Dermatitis in Steatohepatitic Mice

Patients with psoriasis are at a higher risk of developing nonalcoholic fatty liver disease. We previously identified an oxidized derivative of cholesterol, 7-ketocholesterol (7KC), in diet-induced steatohepatitic mice. Here, we investigated whether 7KC exacerbates psoriasis-like dermatitis by accelerating steatohepatitis in mice. A high-fat/high-cholesterol/high-sucrose/bile salt diet (nonalcoholic steatohepatitis (NASH) diet) with or without 0.0125% 7KC was fed to C57BL/6 mice (7KC or control group) for three weeks to induce steatohepatitis. A 5% imiquimod cream was then applied to the ears and dorsal skin for four days to induce psoriasis-like dermatitis. Hepatic lipid accumulation and inflammatory cell infiltration were exacerbated in the 7KC group compared with the control group after three weeks. Serum tumor necrosis factor-α (TNF-α) levels were also elevated in the 7KC group (108.5 ± 9.8 vs. 83.1 ± 13.1 pg/mL, p < 0.005). Imiquimod cream increased the psoriasis area severity index (PASI) score in mice in the 7KC group (9.14 ± 0.75 vs. 5.17 ± 1.17, p < 0.0001). Additionally, Tnfa, Il23a, Il17a, and Il22 mRNA levels in the dorsal lesion were significantly upregulated. Finally, Th17 cell differentiation and the TNF signaling pathway were enhanced in the dorsal lesions and liver of mice in the 7KC group. These data suggest that steatohepatitis and psoriasis are linked by a potent, diet-related factor.     

Visualizing Intramolecular Dynamics of Membrane Proteins

Membrane proteins play important roles in biological functions, with accompanying allosteric structure changes. Understanding intramolecular dynamics helps elucidate catalytic mechanisms and develop new drugs. In contrast to the various technologies for structural analysis, methods for analyzing intramolecular dynamics are limited. Single-molecule measurements using optical microscopy have been widely used for kinetic analysis. Recently, improvements in detectors and image analysis technology have made it possible to use single-molecule determination methods using X-rays and electron beams, such as diffracted X-ray tracking (DXT), X-ray free electron laser (XFEL) imaging, and cryo-electron microscopy (cryo-EM). High-speed atomic force microscopy (HS-AFM) is a scanning probe microscope that can capture the structural dynamics of biomolecules in real time at the single-molecule level. Time-resolved techniques also facilitate an understanding of real-time intramolecular processes during chemical reactions. In this review, recent advances in membrane protein dynamics visualization techniques were presented.     

Effect of Hypoxia on Pulmonary Endothelial Cells from Bleomycin-Induced Pulmonary Fibrosis Model Mice

Pulmonary fibrosis is a progressive and fatal disorder characterized by dysregulated repair after recurrent injury. Destruction of the lung architecture with excess extracellular matrix deposition induces respiratory failure with hypoxia and progressive dyspnea. The impact of hypoxia on pulmonary endothelial cells during pulmonary fibrogenesis is unclear. Using a magnetic-activated cell sorting system, pulmonary endothelial cells were isolated from a mouse model of pulmonary fibrosis induced by intratracheally administered bleomycin. When endothelial cells were exposed to hypoxic conditions, a hypoxia-inducible factor (HIF)-2α protein was detected in CD31- and α-smooth muscle actin (SMA)-positive cells. Levels of plasminogen activator inhibitor 1, von Willebrand factor, and matrix metalloproteinase 12 were increased in endothelial cells isolated from bleomycin-treated mice exposed to hypoxic conditions. When endothelial cells were cultured under hypoxic conditions, levels of fibrotic mediators, transforming growth factor-β and connective tissue growth factor, were elevated only in endothelial cells from bleomycin-treated and not from saline-treated lungs. The increased expression of α-SMA and mesenchymal markers and collagen production in bleomycin- or hypoxia-stimulated endothelial cells were further elevated in endothelial cells from bleomycin-treated mouse lungs cultured under hypoxic conditions. Exposure to hypoxia damaged endothelial cells and enhanced fibrogenesis-related damage in bleomycin-treated pulmonary endothelial cells.