Contamination with retinoic acid receptor agonists in two rivers in the Kinki region of Japan

This study was conducted to investigate the agonistic activity against human retinoic acid receptor (RAR) α in the Lake Biwa-Yodo River and the Ina River in the Kinki region of Japan. To accomplish this, a yeast two-hybrid assay was used to elucidate the spatial and temporal variations and potential sources of RARα agonist contamination in the river basins. RARα agonistic activity was commonly detected in the surface water samples collected along two rivers at different periods, with maximum all-trans retinoic acid (atRA) equivalents of 47.6 ng-atRA/L and 23.5 ng-atRA/L being observed in Lake Biwa-Yodo River and Ina River, respectively. The results indicated that RARα agonists are always present and widespread in the rivers. Comparative investigation of RARα and estrogen receptor α agonistic activities at 20 stations along each river revealed that the spatial variation pattern of RARα agonist contamination was entirely different from that of the estrogenic compound contamination. This suggests that the effluent from municipal wastewater treatment plants, a primary source of estrogenic compounds, seemed not to be the cause of RARα agonist contamination in the rivers. Fractionation using high performance liquid chromatography (HPLC) directed by the bioassay found two bioactive fractions from river water samples, suggesting the presence of at least two RARα agonists in the rivers. Although a trial conducted to identify RARα agonists in the major bioactive fraction was not completed as part of this study, comparison of retention times in HPLC analysis and quantification with liquid chromatography-mass spectrometry analysis revealed that the major causative contaminants responsible for the RARα agonistic activity were not RAs (natural RAR ligands) and 4-oxo-RAs, while 4-oxo-RAs were identified as the major RAR agonists in sewage in Beijing, China. These findings suggest that there are unknown RARα agonists with high activity in the rivers.     

Redox‐Active Catalyst Based on Poly(Anilinesulfonic Acid)‐ Supported Gold Nanoparticles for Aerobic Alcohol Oxidation in Water

The hybrid consisting of gold nanoparticles and poly(2‐methoxyaniline‐5‐sulfonic acid), which works as a redox mediator for transferring protons and electrons, catalyzed the oxidation reaction of various alcohols in water under molecular oxygen.     

Evaluation of Stress and Crystal Quality in Si During Shallow Trench Isolation by UV-Raman Spectroscopy

Defects and stress gradually accumulate throughout various Si large-scale integration fabrication processes. It is essential to monitor defects and stress carefully to suppress their unintentional introduction. In this study, we measured the stress and crystal quality in shallow trench isolation (STI) samples by ultraviolet (UV)-Raman spectroscopy with an extremely high-resolution wavenumber to evaluate the effect of post-annealing on the recovery of Si crystals. The variations of crystal quality in 200-mm wafers with STI structures gradually decreased after post-annealing for 4 h, 6 h, and 8 h; however, there was no substantial difference in the values of full-width at half-maximum of the Raman spectra. Precise measurements of variations of stress and crystal quality were successfully performed by UV-Raman spectroscopy with a high-resolution wavenumber, which enabled us to evaluate the STI process accurately.     

Development of a strain for efficient degradation of polychlorinated biphenyls by patchwork assembly of degradation pathways

Rhodococcus jostii RHA1 accumulates chlorobenzoates (CBA) during the degradation of polychlorinated biphenyls (PCBs). CBA degradation is considered one of the rate-limiting steps in the complete degradation of PCBs. To reduce the accumulation of CBAs, the upper pathway enzyme genes for PCB degradation of RHA1 were introduced into a CBA-degrading bacterium, Burkholderia sp. NK8. The resulting recombinant strain exhibited no biphenyl 2,3-dioxygenase (BphA) activity encoded by bphAaAbAcAd genes, which encode the large and small subunits of the terminal oxygenase component and the ferredoxin and reductase subunits responsible for electron transfer from NADH to the large subunit. The remaining enzyme genes involved in the transformation of biphenyl to benzoate, bphB2C1D1, which encode dehydrogenase, ring-cleavage dioxygenase and hydrolase, conferred activities to NK8. To obtain the BphA activity of RHA1 in NK8, sets of BphA genes were constructed by combining the bphAaAbAcAd genes of RHA1 and bphA3A4 of Pseudomonas pseudoalcaligenes KF707, encoding the ferredoxin and reductase subunits. Hybrid derivatives of BphA containing the KF707 bphA3 conferred BphA activity to NK8, and a derivative containing the RHA1 bphAaAb and KF707 bphA3A4 genes exhibited the highest BphA activity. A plasmid containing the RHA1 bphAaAb and KF707 bphA3A4 genes plus the RHA1 bphB2C1D1 genes was constructed and introduced into NK8. The resulting recombinant strain efficiently degraded 2-, 3- and 4-chlorobiphenyls with an apparent reduction in CBA accumulation in comparison to the recombinant mutant strain, which had an insertion in the cbeA gene to inactivate CBA dioxygenase.     

Electron pulse radiolysis determination of hydroxyl radical rate constants with Suwannee River fulvic acid and other dissolved organic matter isolates

Pulse radiolysis experiments were conducted on dissolved organic matter (DOM) samples isolated as hydrophobic and hydrophilic acids and neutrals from different sources (i.e., stream, lake, wastewater treatment plant). Absolute bimolecular reaction rate constants for the reaction of hydroxyl radicals (*OH) with DOM (k*(OH), DOM) were determined. k*(OH, DOM) values are expressed as moles of carbon. Based on direct measurement of transient DOM radicals (DOM*) and competition kinetic techniques, both using pulse radiolysis, the k*(OH, DOM) value for a standard fulvic acid from the Suwannee River purchased from the International Humic Substances Society was (1.60 +/- 0.24) x 10(8) M(-1) s(-1). Both pulse radiolysis methods yielded comparable k*(OH, DOM) values. The k*(OH, DOM) values for the seven DOM isolates from different sources ranged from 1.39 x 10(8) M(-1) s(-1) to 4.53 x 10(8) M(-1) s(-1), and averaged 2.23 x 108 M(-1) s(-1) (equivalent to 1.9 x 10(4) (mgC/L)(-1) s(-1)). These values represent the first direct measurements of k*(OH, DOM,) and they compare well with literature values obtained via competition kinetic techniques during ozone or ultraviolet irradiation experiments. More polar, lower-molecular-weight DOM isolates from wastewater have higher k*(OH, DOM) values. In addition, the formation (microsecond time scale) and decay (millisecond time scale) of DOM* transients were observed for the first time. DOM* from hydrophobic acids exhibited broader absorbance spectra than transphilic acids, while wastewater DOM isolates had narrower DOM* spectra more skewed toward shorter wavelengths than did DOM* spectra for hydrophobic acids.     

Microporous activated carbons from used coffee grounds for application to electric double‐layer capacitors

Electrochemical double‐layer capacitors (EDLCs) are devices that store enormous amounts of charge electrostatically when a potential is applied between electrodes of very high surface area (typically made of porous carbon) and an electrolyte. Wider commercialization of this technology has been held back by the lack of ultralow‐cost electrode materials. We demonstrate that used coffee grounds can be processed to form low‐cost electrodes. The surface and electrochemical characteristics of microporous activated carbons from used coffee grounds (CGCs) were measured. First, optimal times and temperatures for carbonization and activation were identified on the basis of Brunauer–Emmett–Teller (BET) surface area, pore volume, and pore size distribution. Second, CGCs were used as polarized electrodes in EDLCs, whose capacitances were evaluated using cyclic voltammetry. The results show that carbonization for 1 h at 600 °C with a heating rate of 300 °C/h, followed by CO₂ activation for 2 h at 1000 °C, affords the highest BET surface area (1867 m²/g) compared to other works. The produced CGCs have many micropores of less than 2 nm across, which contribute to the formation of an electric double layer. Capacitors made using these CGCs show the highest capacitance (103 F/g) in 0.8 M (C₂H₅)₄NBF₄/PC as an organic electrolyte, which is much higher than the ∼80 F/g typically used in organic‐electrolyte‐based commercial EDLCs, suggesting that coffee grounds are a useful electrode material. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Isolation and characterization of poly(butylene succinate-co-butylene adipate)-degrading microorganism

Poly(butylene succinate-co-butylene adipate) (PBSA)-degrading bacterium, strain 1-A, was isolated from soil. Strain 1-A was identified as Bacillus pumilus on the basis of its physiological properties and partial 16S rRNA gene sequence. Strain 1-A also degraded poly(butylene succinate) (PBS) and poly(epsilon-caprolactone). On the other hand, poly(butylene adipate terephthalate) and poly(lactic acid) were minimally degraded by strain 1-A. The NMR spectra of degradation products from PBSA indicated that the adipate units were more rapidly degraded than 1,4-butanediol and succinate units. This seems to be one of the reasons why strain 1-A degraded PBSA faster than PBS.     

Estimation of daily intake of phenols in hospital meal samples

Daily intakes of 12 phenols which are possible endocrine disruptors were estimated in hospital meals from 2000 to 2001. 4-Nonylphenol (4-NP (mix)) and bisphenol A (BPA) were detected at levels of 5.0 to 19.4 ng/g and 0.2 to 1.1 ng/g, respectively. 4-tert-Butylphenol, 4-n-pentylphenol, 4 -tert-pentylphenol, 4-n-hexylphenol, 4-n-heptylphenol and 4-tert-octylphenol were detected at levels of 0.1 to 2.4 microg/g. The daily intakes of 4-NP (mix) and BPA were 5.8 microg/day and 0.42 microg/day, respectively. The daily intakes of other phenols were less than 1 microg/day.     

Influence of quadrature‐axis reactance of large turbine generator on operation

Two‐pole large generators are extensively used in power utilities. Growing demand for electric power in recent years has led to substantial increases in the capacity of generators. In line with this trend, our company has manufactured two‐pole turbine generators in the 900,000‐kVA to 1,200,000‐kVA classes. As the capacity of generators becomes larger, equivalent circuits are increasingly expected to improve their precision in estimating operation characteristics. The Park model has been widely used as an equivalent circuit model. The Park model with quadrature axis transient reactance $x_{q}^{\prime}$ is claimed to be useful for accurately estimating the load rejection characteristics of turbine generators. However, it is difficult to measure $x_{q}^{\prime}$, few studies based on measured data have appeared. As one of the few examples, we have conducted a measured data on a 500,000‐kVA‐class generator. Recently, the authors obtained test data on $x_{q}^{\prime}$ of a 900,000‐kVA‐class generator. In this study, based on these data, we studied the effect of $x_{q}^{\prime}$ using the finite element method and a transient analysis program (EMTP‐ATP). © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 177(3): 17–27, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21099