Implementation of empirically validated interventions in managed-care settings: The prevention and relationship enhancement program.

In an age of managed care, how does the clinician best help couples in marital distress? Do the short-term protocols developed and tested in the laboratory really work in the average clinical setting? This project examined the feasibility and effectiveness of implementing a laboratory-based program designed to prevent the development of relationship distress within an HMO. Both men and women reported high satisfaction with the program and a subjective sense that it was helpful for their relationships. Specific suggestions are made for assisting therapists in using effective treatments for couples in managed-care settings (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Printing cotton fabrics with reactive dyes of high reactivity from an acidic printing paste

The behaviour of reactive dyes of high reactivity during the printing process of 100% cotton fabrics from an alkaline and acidic printing paste was studied in detail. The printing pastes were stored for different periods of time and then the fabrics were printed. The samples were subjected to two methods of fixation, the first by steaming and the second by thermofixation. The effects of different factors such as alkali and acid concentration, storage time of the printing pastes and method of fixation on the K/S values of the prints were investigated. The fastness properties of the printed areas were also measured to determine the improvement obtained by acidic printing with high-reactivity reactive dyes on cotton fabrics.     

Effect of moist curing and use of lightweight sand on characteristics of high-performance concrete

Factorial design approach was undertaken to determine the effect of initial moist-curing duration (0 and 6 days) on properties of high-performance concrete (HPC) made with different water-to-cementitious materials ratios (w/cm) of 0.30 and 0.40 and sand substitution rates with lightweight sand (LWS) of 0 and 30 %, by volume. Mechanical properties of HPC are shown to be mainly affected by w/cm and total shrinkage of concrete by the LWS replacement rate and initial moist-curing period. It should be noted that concrete made with 30 % LWS replacement that did not receive any moist-curing exhibited lower shrinkage than moist-cured concrete prepared without any LWS, regardless of the w/cm. Combined use of 30 % LWS and 7 days of moist curing can lead to greater increase in compressive strength and larger decrease in total shrinkage compared to the use of 30 % LWS without moist curing or 7 days of moist curing without LWS. The use of LWS, however, is more practical and efficient to reduce shrinkage of HPC for deep concrete elements.     

Adaptive investigation of the optical properties of polymer fibers from mixing noisy phase shifting microinterferograms using deep learning algorithms

In this article, an adaptive denoising method is suggested to accurate investigate the optical and structural features of polymeric fibers from noisy phase shifting microinterferograms. The mixed class of noise that may produce in the phase-shifting interferometric techniques is established. To our knowledge, this is an early study considered the mixing noises that may occur in microinterferograms. The suggested method utilized the convolution neural networks to detect the noise class and then denoising, it according to its class. Four convolution neural networks (Googlenet, VGG-19, Alexnet, and Alexnet–SVM) are refined to perform the automatic classification process for the noise class in the established data set. The network with the highest validation and testing accuracy of these networks is considered to apply the suggested method on realistic noisy microinterferograms for polymeric fibers, polypropylene and antimicrobial polyethylene terephthalate)/titanium dioxide, recoded using interference microscope. Also, the suggested method is applied on noisy microinterferograms include crazing and nanocomposite material. The demodulated phase maps and the three-dimensional birefringence profiles are calculated for tested fibers according to the suggested method. The obtained results are compared with the published data for these fibers and found to be in good agreements.     

The energy intensity in Lithuania during 1995–2009: A LMDI approach

The measurement, assessment, and effective mitigation of energy intensity compose a foremost objective of contemporary energy policy. Although the European Union (EU) Member States have been experiencing the convergence in energy efficiency indicators, Lithuania, acceded to the EU in 2004, still remains peculiar with relatively high energy intensity. Our study, therefore, is aimed at analyzing the energy intensity trends in Lithuanian economy as a whole as well as in separate economic sectors. The investigation covers the period of 1995–2009. The Logarithmic Mean Divisia Index was applied for decomposition analysis. Our analysis has shown that energy efficiency falls during economic downturn. In order to facilitate these challenges the Lithuanian Government as well as business should opt for increasing energy efficiency in the most problematic sectors of transport and services. In addition, the analysis of legal acts, namely National Energy Efficiency Programme for 2006–2010 and Energy Efficiency Action plan for 2010–2016, was taken into consideration. Some suggestions, thus, were offered for successful implementation of strategic goals outlined in the aforementioned strategic documents.     

Comparative assessment of future motor vehicles under various climate change mitigation scenarios

The aim of comparative assessment of future road transport technologies is to find the cheapest motor vehicles in terms of private and external Greenhouse Gas (GHG) emission costs under various international climate change mitigation scenarios in 2020 and 2050. The comparative assessment of the main road transport technologies ranging from conventional vehicles to hybrid electric vehicles was performed. The main indicators for comparative future motor vehicles assessment are: private costs and life cycle external costs of GHG emissions. The obtained ranking of road transport technologies allows to identify the most perspective future motor vehicles taking into account international climate change mitigation constraints and to promote these road technologies by policy tools. The cheapest road transport technologies in 2020 and 2050 are: the main results presented in this paper were obtained during EU financed Framework 7 project “PLANETS” dealing with probabilistic long-term assessment of new energy technology scenarios.     

Comparative effects of gamma and microwave irradiation on the quality of black pepper

Powdered black pepper from Egyptian markets, was irradiated with different recommended doses of gamma rays (5.0 and 10.0 kGy) and with microwaves for different periods (20, 40 and 75 s) to improve its hygienic quality. The most common bacterial isolates were of three generaBacillus, Clostridium andMicrococcus (7.5 × 10⁶), whereas the predominant fungi (7.8 × 10⁴) wereAspergillus species,A. glaucus, A. flavus, A. niger andA. ochraceus. Doses of gamma irradiation used (5.0 and 10 kGy) were sufficient to decrease spore-forming bacteria (SFB) and to inhibit the fungal flora and coliforms which contaminated the black pepper powder. Microwave treatments for 40 s and 75 s were of the same effectiveness whereas treatment for 20 s was less so. GLC analysis proved the presence of 31 peaks, only 19 compounds were identified as monoterpene hydrocarbons (56.21%), the major one being -phellandrene and limonene. Sesquiterpenes were also present, mainly -caryollphyllene (3.69%) as well as oxygenated compounds such as terpenol, geraniol, Me-chavicol, eugenol and anisol. Gamma irradiation at 5 kGy and 10 kGy respectively decreased the numbers of identified compounds from 21 (86.58% concentration) in untreated pepper to 16 (59.22% concentration), 15 (54.06% concentration). In comparison, microwave treatments, particularly for 40 s and 75 s, increased the concentration of the same compounds. The results obtained indicate that microwave treatment, under these conditions, is a safe and suitable technique for decontamination of black pepper which does not result in a great loss of flavour compounds, as compared with recommended doses of gamma irradiation.     

Some simple methods of home processing and their implication with weaning foods

One of the most practical solutions to combat protein energy malnutrition (PEM) in low income groups is the intelligent mixing of cereals and legumes to make available low cost weaning foods of high nutritional quality. One of the main obstacles to increase energy and nutrient density of weaning foods of cereals and legumes is the bulk factor. In this study some simple methods of home processing to improve the nutritional quality of the home prepared weaning foods were tested and the processed weaning foods were chemically and biologically evaluated. Biochemical evaluation revealed that the germination of wheat raised its protein and fat and reduced carbohydrate, while there was almost no change on lentils. Comparing germination with a special “chapati” process, protein and fat content were higher in the formula processed by the former method, while minerals were higher in the same formula but processed by the latter method. Biological evaluation of the formula processed by the two different methods showed that germination got the highest PER and NPU compared with chapati process figures were (2.02 and 81.0) and (1.70 and 40.0) respectively. Although further research is needed, germination of ingredients of weaning foods of vegetable origin seems to be a good option of the simple home processing technique.     

The optimal class size for object-oriented software

A growing body of literature suggests that there is an optimal size for software components. This means that components that are too small or too big will have a higher defect content (i.e., there is a U-shaped curve relating defect content to size). The U-shaped curve has become known as the "Goldilocks Conjecture." Recently, a cognitive theory has been proposed to explain this phenomenon and it has been expanded to characterize object-oriented software. This conjecture has wide implications for software engineering practice. It suggests 1) that designers should deliberately strive to design classes that are of the optimal size, 2) that program decomposition is harmful, and 3) that there exists a maximum (threshold) class size that should not be exceeded to ensure fewer faults in the software. The purpose of the current paper is to evaluate this conjecture for object-oriented systems. We first demonstrate that the claims of an optimal component/class size (1) above) and of smaller components/classes having a greater defect content (2) above) are due to a mathematical artifact in the analyses performed previously. We then empirically test the threshold effect claims of this conjecture (3) above). To our knowledge, the empirical test of size threshold effects for object-oriented systems has not been performed thus far. We performed an initial study with an industrial C++ system and repeated it twice on another C++ system and on a commercial Java application. Our results provide unambiguous evidence that there is no threshold effect of class size. We obtained the same result for three systems using four different size measures. These findings suggest that there is a simple continuous relationship between class size and faults, and that, optimal class size, smaller classes are better and threshold effects conjectures have no sound theoretical nor empirical basis