Influence of Sr2+ on Calcium‐Deficient Hydroxyapatite Formation Kinetics and Morphology in Partially Amorphized α‐TCP

Hydration of partially amorphized α‐TCP powders with Sr²⁺ concentrations ranging from 0 to 10 mol% substitution for Ca²⁺ was analyzed by isothermal calorimetry and quantitative in‐situ XRD. Hydration of both crystalline α‐TCP and amorphous TCP (ATCP) forming CDHA was retarded to an increasing extent with increasing Sr²⁺ content. Sr²⁺ slightly reduced the crystallite size (XRD coherent scattering domains) of the CDHA formed during hydration, while the size of crystals visible under SEM was not noticeably affected. Reaction enthalpies of ΔH_{R(Sr‐α‐TCP→Sr‐CDHA)} = 122 ± 8 J/g_TCP and ΔH_{R(Sr‐ATCP→Sr‐CDHA)} = 257 ± 8 J/g_TCP were determined for the hydration of crystalline α‐TCP and ATCP containing 5 mol% Sr²⁺ substitution for Ca²⁺. This is comparable with the corresponding reaction enthalpies previously obtained for undoped samples, which are 106 ± 7 J/g_TCP for α‐TCP and 250 ± 7 J/g_TCP for ATCP.     

Sustainability of biofuels in Latin America: Risks and opportunities

Several Latin American countries are setting up biofuel programmes to establish alternative markets for agricultural commodities. This is mainly triggered by the current success of Brazilian bioethanol production for the domestic market and for export. Furthermore, the global biofuel market is expected to increase due to ambitious biofuel programmes in the EU and in the USA. Colombia, Venezuela, Costa Rica and Guatemala are focusing on bioethanol production from sugarcane whereas biofuel production in Argentina is based on soy biodiesel. Recent developments of the biofuel sector take place extremely rapid especially in Argentina, which became one of the five largest biodiesel producers in the world in 2008. Till date no specific biofuel sustainability certification systems have been implemented in Latin American, as well as on global level. This fact and the predominant use of food crops for biofuel production raise concerns about the sustainability of biofuel production related to environmental and social aspects. This paper provides an overview of the hotspots of conflicts in biofuel production in Latin America. It investigates presently available sustainability tools and initiatives to ensure sustainable biofuel production in Latin America. Finally, it provides an outlook on how to integrate sustainability in the Latin American biofuel sector.     

Optimised plasma stabilisation at TEXTOR with an advanced, real-time digital control scheme

The tokamak TEXTOR at the Research Centre in Jülich is in operation since more than 25 years. The various control systems at the start, in 1982, were based on analogue techniques, a standard at the time, and were later partly replaced by specially developed digital systems. These systems proved their robustness over the years. As a replacement for the old system, off-the-shelf products were used to ensure continuity, reliability and to reduce the development cost. To provide advanced control scenarios, the new system allows the implementation of more sophisticated algorithms for magnetic and kinetic control. The LabVIEW Real-Time (RT) modules and real-time hardware from National Instruments satisfy these requirements to a large extent. The new system has already been successfully commissioned at TEXTOR and is used to calculate in real-time the plasma density profile (10 ms), the Shafranov shift (10 ms), the plasma vertical and horizontal position (20 $\mu$s) and to control the plasma shape (1 ms). TEXTOR has circular plasmas and has an iron core. Its central part is operated in saturation. During the saturation phase, stray fields change the plasma shape from nearly circular to slightly triangular. By using a shape-control coil set, we can control and adjust the plasma form. The new real-time system is presented as well as the implemented control applications.     

Physicochemical properties of ready‐to‐eat extruded nixtamalized maize‐based snacks enriched with grasshopper

The aim of this research was to prepare an extruded snack based on nixtamalized maize flour (Zea mays L.) (NMF) enriched with grasshopper meal (Sphenarium purpurascens Ch.) (GM) using a single screw extruder with a compression screw ratio of 3:1. A central experimental design comprising three independent variables, namely, extrusion temperature (T = 120–180 °C), feed moisture content (FMC = 18–22 g/100 g) and the grasshopper meal proportion (GMP = 0–40 g/100 g), was used. Increasing T decreased (P < 0.05) the expansion index (EI), bulk density (BD) and hardness (H). Increasing the FMC increased (P < 0.05) the EI. Increasing the GMP decreased (P < 0.05) the EI, H and water absorption index (WAI) and increased (P < 0.05) the BD and total colour difference (ΔE). The treatments that resulted in better general acceptability were those that contained a lower GMP. An extruded snack acceptable to the consumer can be obtained from a blend of NMF and GM, and up to 8.11 g/100 g of GM can be incorporated without affecting the physicochemical properties and acceptance of the snack.     

Friction stir welding of aluminium casting alloys

The results of testing friction stir welding quality in relation to EN AC-43200 (AK9) and EN AC-45000 (AK64) aluminium casting alloys are presented. The test joints were made with the use of a welding machine constructed on the basis of numerically controlled milling machines. The assessment of the joint quality was made based on visual inspection, mechanical testing, weldment structure analysis and hardness tests. The purpose of the investigation was to discover the possibility of friction stir welding of casting alloys and the influence of welding conditions on joint properties and structure. The test results show good weldability of aluminium casting alloys by the FSW method. Sound welds can be obtained in a relatively wide range of welding parameters while the weld strength is satisfactory. In order to obtain the highest quality joints, the workpieces must be pressed onto the other, while the welding process cannot run with excessively high speed. The best mechanical properties of the joints were achieved when the friction process was conducted at a rotational speed of the mixing tool of 900 rpm.     

Characterization of the mechanical and thermal interface of copper films on carbon substrates modified by boron based interlayers

The manipulation of mechanical and thermal interfaces is essential for the design of modern composites. Amongst these are copper carbon composites which can exhibit excellent heat conductivities if the Cu/C interface is affected by a suitable interlayer to minimize the Thermal Contact Resistance (TCR) and to maximize the adhesion strength between Cu and C.In this paper we report on the effect of boron based interlayers on wetting, mechanical adhesion and on the TCR of Cu coatings deposited on glassy carbon substrates by magnetron sputtering. The interlayers were 5?nm thick and consisted of pure B and B with additions of the carbide forming metals Mo, Ti and Cr in the range of 5?at.% relative to B. The interlayers were deposited by RF magnetron sputtering from either a pure B target or from a composite target. The interlayer composition was checked by Auger Electron Spectroscopy and found to be homogenous within the whole film.The system C-substrate/interlayer/Cu coating was characterized in as deposited samples and samples heat treated for 30?min at 800?°C under High Vacuum (HV), which mimics typical hot pressing parameters during composite formation. Material transport during heat treatment was investigated by Secondary Ion Mass Spectroscopy (SIMS). The de-wetting and hole formation in the Cu coating upon heat treatment were studied by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The adhesion of the Cu coating was evaluated by mechanical pull-off testing. The TCR was assessed by infrared photothermal radiometry (PTR). A correlation between the adhesion strength and the value of the TCR which was measured by PTR was determined for as deposited as well as for heat treated samples.     

Resolution improvement in two-photon fluorescence microscopy with a single-mode fiber

The dependence of spectral broadening of an ultrashort-pulsed laser beam on the fiber length and the illumination power is experimentally characterized in order to deliver the laser for two-photon fluorescence microscopy. It is found that not only the spectral width but also the spectral blue shift increases with the fiber length and illumination power, owing to the nonlinear response in the fiber. For an illumination power of 400 mW in a 3-m-long single-mode fiber, the spectral blue shift is as large as 15 nm. Such a spectral blue shift enhances the contribution from the short-wavelength components within the pulsed beam and leads to an improvement in resolution under two-photon excitation, whereas the efficiency of two-photon excitation is slightly reduced because of the temporal broadening of the pulsed beam. The experimental measurement of the axial response to a two-photon fluorescence polymer block confirms this feature.     

HTGR reactor physics and fuel cycle studies

The high-temperature gas-cooled reactor (HTGR) appears as a good candidate for the next generation of nuclear power plants. In the “HTR-N” project of the European Union Fifth Framework Program, analyses have been performed on a number of conceptual HTGR designs, derived from reference pebble-bed and hexagonal block-type HTGR types. It is shown that several HTGR concepts are quite promising as systems for the incineration of plutonium and possibly minor actinides.These studies were mainly concerned with the investigation and intercomparison of the plutonium and actinide burning capabilities of a number of HTGR concepts and associated fuel cycles, with emphasis on the use of civil plutonium from spent LWR uranium fuel (first generation Pu) and from spent LWR MOX fuel (second generation Pu). Besides, the “HTR-N” project also included activities concerning the validation of computational tools and the qualification of models. Indeed, it is essential that validated analytical tools are available in the European nuclear community to perform conceptual design studies, industrial calculations (reload calculations and the associated core follow), safety analyses for licensing, etc., for new fuel cycles aiming at plutonium and minor actinide (MA) incineration/transmutation without multi-reprocessing of the discharged fuel.These validation and qualification activities have been centred round the two HTGR systems currently in operation, viz. the HTR-10 and the HTTR. The re-calculation of the HTTR first criticality with a Monte Carlo neutron transport code now yields acceptable correspondence with experimental data. Also calculations by 3D diffusion theory codes yield acceptable results. Special attention, however, has to be given to the modelling of neutron streaming effects. For the HTR-10 the analyses focused on first criticality, temperature coefficients and control rod worth. Also in these studies a good correspondence between calculation and experiment is observed for the 3D diffusion theory codes.     

The antisteroid action on the pineal gland

The study presents the data gathered along the years on the antisteroid action of the pineal gland. Thus, it was demonstrated that administration of pineal polypeptides to the rabbit lowers the urinary 17-KS both of testicular and adrenal origin. Conversely, pinealectomy caused an increase in the level of these steroid hormones. The same pineal material induced a marked decrease both in the serum and testicular testosterone and in the plasma and adrenal corticosterone in the rat. At the same time administration of pineal polypeptides lowered the cholesterol in the serum, bile, liver, testis and adrenal. Melatonin had no effect on these biochemical indices, which demonstrates that the effects obtained with pineal polypeptides are not mediated by melatonin.