The Effect of Long-Lasting Swimming on Rats Skeletal Muscles Energy Metabolism after Nine Days of Dexamethasone Treatment

This study investigates the effect of Dexamethasone (Dex) treatment on blood and skeletal muscle metabolites level and skeletal muscle activity of enzymes related to energy metabolism after long-duration swimming. To evaluate whether Dex treatment, swimming, and combining these factors act on analyzed data, rats were randomly divided into four groups: saline treatment non-exercise and exercise and Dex treatment non-exercised and exercised. Animals in both exercised groups underwent long-lasting swimming. The concentration of lipids metabolites, glucose, and lactate were measured in skeletal muscles and blood according to standard colorimetric and fluorimetric methods. Also, activities of enzymes related to aerobic and anaerobic metabolism were measured in skeletal muscles. The results indicated that Dex treatment induced body mass loss and increased lipid metabolites in the rats’ blood but did not alter these changes in skeletal muscles. Interestingly, prolonged swimming applied after 9 days of Dex treatment significantly intensified changes induced by Dex; however, there was no difference in skeletal muscle enzymatic activities. This study shows for the first time the cumulative effect of exercise and Dex on selected elements of lipid metabolism, which seems to be essential for the patient’s health due to the common use of glucocorticoids like Dex.     

Orientation of triblock copolymers in planar extension

Three commercial styrenic triblock copolymers were subjected to planar extension in a lubricated channel die, as a model for the orientation that may occur during processing operations. Materials that contain cylinders of polystyrene show a pronounced orientation of the cylinder axis in the flow direction, as revealed by small-angle X-ray scattering in the three orthogonal directions. This anisotropy produces small-strain tensile moduli that differ by a factor of 10 or more in the two in-plane directions. A material that contains lamellae of polystyrene shows pronounced orientation of the lamellae in the plane of the sample; in particular, lamellar normals are strongly forbidden from pointing along the flow direction. For similar strains, planar extension is much more effective in orienting these materials than simple shear.     

Solution Structure and Constrained Molecular Dynamics Study of Vitamin B12 Conjugates of the Anorectic Peptide PYY(3–36)

Vitamin B₁₂–peptide conjugates have considerable therapeutic potential through improved pharmacokinetic and/or pharmacodynamic properties imparted on the peptide upon covalent attachment to vitamin B₁₂ (B₁₂). There remains a lack of structural studies investigating the effects of B₁₂ conjugation on peptide secondary structure. Determining the solution structure of a B₁₂–peptide conjugate or conjugates and measuring functions of the conjugate(s) at the target peptide receptor may offer considerable insight concerning the future design of fully optimized conjugates. This methodology is especially useful in tandem with constrained molecular dynamics (MD) studies, such that predictions may be made about conjugates not yet synthesized. Focusing on two B₁₂ conjugates of the anorectic peptide PYY(3–36), one of which was previously demonstrated to have improved food intake reduction compared with PYY(3–36), we performed NMR structural analyses and used the information to conduct MD simulations. The study provides rare structural insight into vitamin B₁₂ conjugates and validates the fact that B₁₂ can be conjugated to a peptide without markedly affecting peptide secondary structure.     

Sustainability of biofuels in Latin America: Risks and opportunities

Several Latin American countries are setting up biofuel programmes to establish alternative markets for agricultural commodities. This is mainly triggered by the current success of Brazilian bioethanol production for the domestic market and for export. Furthermore, the global biofuel market is expected to increase due to ambitious biofuel programmes in the EU and in the USA. Colombia, Venezuela, Costa Rica and Guatemala are focusing on bioethanol production from sugarcane whereas biofuel production in Argentina is based on soy biodiesel. Recent developments of the biofuel sector take place extremely rapid especially in Argentina, which became one of the five largest biodiesel producers in the world in 2008. Till date no specific biofuel sustainability certification systems have been implemented in Latin American, as well as on global level. This fact and the predominant use of food crops for biofuel production raise concerns about the sustainability of biofuel production related to environmental and social aspects. This paper provides an overview of the hotspots of conflicts in biofuel production in Latin America. It investigates presently available sustainability tools and initiatives to ensure sustainable biofuel production in Latin America. Finally, it provides an outlook on how to integrate sustainability in the Latin American biofuel sector.     

Physicochemical properties of ready‐to‐eat extruded nixtamalized maize‐based snacks enriched with grasshopper

The aim of this research was to prepare an extruded snack based on nixtamalized maize flour (Zea mays L.) (NMF) enriched with grasshopper meal (Sphenarium purpurascens Ch.) (GM) using a single screw extruder with a compression screw ratio of 3:1. A central experimental design comprising three independent variables, namely, extrusion temperature (T = 120–180 °C), feed moisture content (FMC = 18–22 g/100 g) and the grasshopper meal proportion (GMP = 0–40 g/100 g), was used. Increasing T decreased (P < 0.05) the expansion index (EI), bulk density (BD) and hardness (H). Increasing the FMC increased (P < 0.05) the EI. Increasing the GMP decreased (P < 0.05) the EI, H and water absorption index (WAI) and increased (P < 0.05) the BD and total colour difference (ΔE). The treatments that resulted in better general acceptability were those that contained a lower GMP. An extruded snack acceptable to the consumer can be obtained from a blend of NMF and GM, and up to 8.11 g/100 g of GM can be incorporated without affecting the physicochemical properties and acceptance of the snack.     

Neutral beam deployment on DEMO and its influence on design

The demands on the neutral beam heating and current drive system of a DEMO device exceed those of existing fusion experiments by several orders of magnitude. By predicting possible power waveforms it is possible to analyse the technological advances necessary to achieve a system relevant to deployment on a power plant. Achieving the necessary efficiency will require simultaneous improvements in beam current density, neutralization efficiency and beam transmission. Considering the deployment on the tokamak vessel shows no major disruption to the tritium breeder blanket and no requirement to reach a high packing density of injectors. The thermal management of components subjected to low heat flux for many hours is considered and it is shown that radiation cooling can be exploited to control the temperature of such items.     

Friction stir welding of aluminium casting alloys

The results of testing friction stir welding quality in relation to EN AC-43200 (AK9) and EN AC-45000 (AK64) aluminium casting alloys are presented. The test joints were made with the use of a welding machine constructed on the basis of numerically controlled milling machines. The assessment of the joint quality was made based on visual inspection, mechanical testing, weldment structure analysis and hardness tests. The purpose of the investigation was to discover the possibility of friction stir welding of casting alloys and the influence of welding conditions on joint properties and structure. The test results show good weldability of aluminium casting alloys by the FSW method. Sound welds can be obtained in a relatively wide range of welding parameters while the weld strength is satisfactory. In order to obtain the highest quality joints, the workpieces must be pressed onto the other, while the welding process cannot run with excessively high speed. The best mechanical properties of the joints were achieved when the friction process was conducted at a rotational speed of the mixing tool of 900 rpm.     

Resolution improvement in two-photon fluorescence microscopy with a single-mode fiber

The dependence of spectral broadening of an ultrashort-pulsed laser beam on the fiber length and the illumination power is experimentally characterized in order to deliver the laser for two-photon fluorescence microscopy. It is found that not only the spectral width but also the spectral blue shift increases with the fiber length and illumination power, owing to the nonlinear response in the fiber. For an illumination power of 400 mW in a 3-m-long single-mode fiber, the spectral blue shift is as large as 15 nm. Such a spectral blue shift enhances the contribution from the short-wavelength components within the pulsed beam and leads to an improvement in resolution under two-photon excitation, whereas the efficiency of two-photon excitation is slightly reduced because of the temporal broadening of the pulsed beam. The experimental measurement of the axial response to a two-photon fluorescence polymer block confirms this feature.