基于广东区域性高职院校创业教育的思考——记广州城建职业学院学生创业教育的探索

职业素质是劳动者对社会职业了解与适应能力的一种综合体现,主要包括职业修养和职业技能。在高职院校中开展创业教育是我国经济形势发展的需要,对于培养学生的实践能力、创新精神和解决学生的就业压力有着十分重要的意义。广州城建职业学院的创业教育可以从以下三方面着手：一是转变观念,营造氛围;二是传授本领,打好基础;三是开展活动,提高能力,逐步探索出一条适合广州城建职业学院特色高职学生创业教育的新路子。     

实验动物在血液制品中的应用

目的：阐述实验动物在血液制品生产质量控制过程中应用的重要性。方法：按《中华人民共和国药典》2005年版三部要求及相关项目的技术规范进行血液制品质量控制。结果：血浆数量150吨,可同时生产以下品种的产品,人血白蛋白共30批次,总瓶数约40万瓶（折10g）;免疫球蛋白类：共30批次,总瓶数约30万瓶（折2.5g）;人纤维蛋白原：共30批次,总瓶数约15万瓶（折0.5g）;人凝血酶原复合物：共30批次,总瓶数约12万瓶（折300IU）;人凝血因子Ⅷ：共30批次,总瓶数约10万瓶（折200IU）。需使用家兔870只、豚鼠300只小鼠750只。结论：实验动物应用于血液制品生产质量控制发挥了非常重要的作用。     

城市道路景观设计研究

本文从城市道路景观的功能出发,分析了道路与景观的相互作用、道路景观的组成要素、道路景观设计的原则及道路景观设计的主要内容,从而引导道路设计者明确功能与景观并重、共性与个性共存、景观规划设计与道路规划设计同步进行的设计理念。     

量块快速检测仪的使用保养及常见故障处理概述

LK型系列量块快速检测仪是一种新型量块测量仪器。该仪器成功地将传感器应用于精密量块检测上,系统稳定、可靠,测量的重复性好,具有多种智能功能,从而提高了量块检测的精度和效率,减轻了检测人员的劳动强度,用户可以从数字显示屏读取测量数据,也可以利用仪器配置的标准通讯接口与计算机连接,对测试结果进行数据处理,从而更为有效地保证了测量数据的可靠性。     

一种蓝色电泳液微胶囊的制备与表征

采用十八胺对酞青蓝BGs进行化学修饰,以Span-80为稳定剂,四氯乙烯为分散介质,制备了分散性和稳定性良好的电泳显示液.用该电泳液作囊芯,以尿素和甲醛进行界面反应形成囊壁,制备了蓝色电子墨水微胶囊,讨论了搅拌速度、酸化时间和固化条件等对微胶囊形貌与物理性质的影响.所制备微胶囊呈规则球形,表面光滑,囊壁结构致密,平均粒径为100 μm,包覆率达89%.采用红外光谱、光学显微镜和电泳实验等方法,研究微胶囊结构及电场响应,蓝色电泳液微胶囊在电场作用下具有明显可逆移动响应.     

Synthesis and luminescence properties of Pr3+ doped CaxBa1?xTiO3 (0.3?x<1) fine particles

Ca _x Ba_1−x TiO₃ (CBT) fine particles doped with red luminescence center of Pr³⁺ ions (Pr: CBT) were successfully synthesized by salt assisted spray pyrolysis (SASP) process. Scanning electronic microscope (SEM) and laser scattering analysis demonstrate that salt can be removed from the surface of particles by washing with Milli-Q water and the particles can be further separated by ball-milling to get well-dispersed Pr³⁺ ions doped CBT fine particles. The luminescence properties, such as photoluminescence (PL) and mechanoluminescence (ML), of as-synthesized Pr: CBT particles were investigated. For Pr: CBT fine particles with different Ca molar ratios, all the samples show one emission at 612 nm, with increasing Ca molar ratio, PL intensity of Pr: CBT fine particles become stronger and stronger. When pressure was loaded on the Pr: CBT pellet, mechanoluminescence(ML) emission was measured. The results show that the ML intensity is proportional to the applied pressure.     

Binding materials of dehydrated phases of waste hardened cement paste and pozzolanic admixture

Fly ash (FA) and ground granulated blast-furnace slag (GGBFS) were added to improve the performances of regenerated binding materials (RBM) which refer to dehydrated phases with rebinding ability of waste hardened cement paste. Flowability tests, compressive strength tests, SEM, TG-DSC, and non-evaporable water content tests were employed to study the performances of the combined binding materials and the interactions between RBM, FA, and GGBFS. Results show that adding FA or GGBFS can improve the workability of RBM paste, and GGBFS has positive effects on strength of RBM. Pozzolanic reactions happen between RBM, FA, and GGBFS. And the activation effect of RBM to FA and GGBFS is superior to that of P.O grade-32.5 cement, especially at earlier ages, because of the high reactive f-CaO existing in RBM. On the advantages of the synergetic effects of RBM and pozzolanic admixtures such as FA and GGBFS, new combined binding materials can be prepared by blending them together. Funded by the National Science Foundation of China(No. 50508034)     

Cycling hardening and serration yielding of Fe-Ni-Cr alloy at high temperature under out-phase TMF

Behaviour of hardening and serration yield of a Fe-Ni-Cr alloy under isothermal cycling (ISC) and out-phase TMF was studied on the basis of varied hysteresis loops. Cycling hardening and serrated yielding for ISC depend on the temperature and the total strain range, stronger hardening with serrated yielding at higher strain range under ISC at 600 °C, but no hardening and serrated yielding occurred under ISC at 800 °C. Stronger hardening with stress serration occurred at the thermal path going to the lowest temperature, no stress serration occurred at the highest temperature under the out-phase. The hardening also depends on the total strain range, higher total strain range with lower cycling temperature resulted in a stronger hardening and remarkable serration yielding behavior. Weaker hardening without serrated yielding occurred at near 800 °C may due to an obvious cycling stress drop under out-phase TMF. Change in the shape of the hysteresis loops also expresses the degree of the damage of the tested alloy under out-phase and ISC.     

Orientation of Bi<Subscript>3.2</Subscript>La<Subscript>0.8</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ferroelectric thin films with different annealing schedules

Fatigue-free Bi_3.2La_0.8Ti₃O₁₂ ferroelectric thin films were successfully prepared on p-Si (100) substrates using metalorganic solution deposition process. The orientation and formation of 5-layers thin films were studied under different processing conditions using XRD. Experimental results indicate that increase in annealing time at 700 °C after preannealing for 10 min at 400 °C can remarkably increase (200)-orientation of the films derived from the precursor solutions with two contents of citric acid. Meanwhile, high content of citric acid increases the film thickness and is conducive to the a-orientation of the films with the preannealing, and low concentration of the solution is conducive to the c-orientation of the films without the preannealing.     

普通电火花成型机床加工小孔的改进方法

针对普通电火花成型机床在进行较深的小孔加工时存在的问题,对电火花成型机床进行部分改造,增加一个压力循环系统,使工具电极中喷出高压工作液,使之更适应小孔加工的条件.以DMKT132精密数控电火花成型机床的改造为实例,说明机床改造前后加工小孔的变化,结果表明,用该方法加工小孔,加工效率平均提高一倍以上,提高了加工质量,具有广泛的推广价值.