Partial replacement of metakaolin with red ceramic waste in geopolymer

Metakaolin was incrementally replaced (33.3%, 50% and 66.6%) by red ceramic waste in geopolymer formulation to study the effect on geopolymerisation and its resultant properties. The geopolymer binders composed of two calcined aluminosilicates (viz. Metakaolin and Red ceramic waste), NaOH and sodium silicate. In the experimental compositions, metakaolin was replaced gradually up to 66.6% in the clay fraction, the Si/Al increased from 3.36 to 5.16 and Na/Al increased from 0.93 to 1.38. The FTIR spectroscopic studies of geopolymer pastes along with XRD analysis indicated that the red ceramic waste partly reacts with alkali and takes part in geopolymer formation. Replacement of 33.3% metakaolin by the red ceramic waste in geopolymer binder did not reduce the compressive strength with respect to the pure metakaolin geopolymer here. Additional replacement resulted in a drastic decrease in the compressive strength of the geopolymer binder. However, the compressive strength of geopolymer mortars revealed interesting synergy between the amount of binder and particle packing in the mortar. Despite having a lower amount of binder phase, mortars with 33% and 50% red ceramic waste exhibited maximum compressive strength values. This has been attributed to improved particle packing through incorporation of red ceramic waste particles.     

Proximity effects of a layered periodic structure on miniaturization of patch antennas

A miniaturized microstrip antenna on a planar layered periodic structure is proposed, designed and fabricated. The proposed structure miniaturizes patch antennas in the microwave band. With varying the parameters of the proposed structure, the achieved miniaturization factor can be adjusted in the range 2.6–4.2. Numerical and experimental results are presented. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Sublinear Algorithms for Approximating String Compressibility

We raise the question of approximating the compressibility of a string with respect to a fixed compression scheme, in sublinear time. We study this question in detail for two popular lossless compression schemes: run-length encoding (RLE) and a variant of Lempel-Ziv (LZ77), and present sublinear algorithms for approximating compressibility with respect to both schemes. We also give several lower bounds that show that our algorithms for both schemes cannot be improved significantly. Our investigation of LZ77 yields results whose interest goes beyond the initial questions we set out to study. In particular, we prove combinatorial structural lemmas that relate the compressibility of a string with respect to LZ77 to the number of distinct short substrings contained in it (its ?th subword complexity , for small ?). In addition, we show that approximating the compressibility with respect to LZ77 is related to approximating the support size of a distribution.     

Improvement in volume resistivity and morphology of a blend of polyolefin elastomer with linear low-density polyethylene

A silane moisture-cured polyolefin elastomer/linear low-density polyethylene (LLDPE) blend was prepared through a two-step silane-grafting method (Sioplas Process) in an industrial scale twin-screw extruder. The silane-grafted compound was used to make wire and cable coatings. In this work, the effect of some interactive parameters on quality of the products prepared by the above method has been studied, while so far, there have been less experimental investigations. The volume resistivity of cross-linked compound was changed from 2.96 × 10¹⁴ to 7.41 × 10¹⁴ Ω cm with increasing LLDPE component by maximum 10 wt%. Surface morphology of the product was corrected with reduction in benzoyl peroxide (BPO) concentration from 0.2 wt% to 0.13 wt%. BPO at this level acted as an initiator in grafting reaction of vinyl trimethoxysilane. The curing condition and specimen preparation method by injection molding and/or extrusion were factors which influenced the hot-set test results at 200 °C. The results of tensile and elongation studies showed a maximum value of 9 MPa and 397% for the tests, after 6 h curing. With increases in curing time at a specified temperature, the gel content of the cross-linked compound was increased and reached its maximum value. The maximum gel content values were found to be approximately 60%, 80%, and 82% at temperatures of 25, 60, and 85 °C, respectively. The hardness, density, and tear strength of the samples did not vary significantly with the curing temperature.

     

Crossing times: Temporal boundary-spanning practices in interorganizational projects

This paper introduces the notion of “temporal boundary spanning” and highlights the key role of project management in resolving temporal tensions among partners participating in interorganizational projects (IOPs). The present study, which is based on data from 93 IOPs undertaken within a major change program, relies on in-depth, semi-structured interviews, observations, and detailed analyses of written documents and procedures from those IOPs. Based on the data, we inductively develop a practice-based theory that identifies three main practices (framing, synchronizing, hyping) used to resolve the central temporal tensions observed in the studied IOPs. In that respect, the paper offers novel insights into the role and practice of project management in IOPs.     

Experiences in building a Grid-based platform to serve Earth observation training activities

Earth observation data processing and storing can be done nowadays only using distributed systems. Experiments dealing with a large amount of data are possible within the timeframe of a lesson and can give trainees the freedom to innovate. Following these trends and ideas, we have built a proof-of-the-concept platform, named GiSHEO, for Earth observation educational tasks. It uses Grid computing technologies to analyze and store remote sensing data, and combines them with eLearning facilities. This paper provides an overview of the GiSHEO's platform architecture and of its technical and innovative solutions.     

Magnetic field-driven induction of ZENK in the trigeminal system of pigeons (Columba livia)

Magnetoreception remains one of the few unsolved mysteries in sensory biology. The upper beak, which is innervated by the ophthalmic branch of the trigeminal nerve (V1), has been suggested to contain magnetic sensors based on ferromagnetic structures. Recently, its existence in pigeons has been seriously challenged by studies suggesting that the previously described iron-accumulations are macrophages, not magnetosensitive nerve endings. This raised the fundamental question of whether V1 is involved in magnetoreception in pigeons at all. We exposed pigeons to either a constantly changing magnetic field (CMF), to a zero magnetic field providing no magnetic information, or to CMF conditions after V1 was cut bilaterally. Using immediate early genes as a marker of neuronal responsiveness, we report that the trigeminal brainstem nuclei of pigeons, which receive V1 input, are activated under CMF conditions and that this neuronal activation disappears if the magnetic stimuli are removed or if V1 is cut. Our data suggest that the trigeminal system in pigeons is involved in processing magnetic field information and that V1 transmits this information from currently unknown, V1-associated magnetosensors to the brain.     

Novel NGR anchored pullulan micelles for controlled and targeted delivery of doxorubicin to HeLa cancerous cells

Doxorubicin (DOX) is used to treat different kinds of cancers, including cervix carcinoma. However, it has various side effects such as cardiotoxicity. Nano-sized controlled releasing carriers such as polymeric micelles are of interesting approaches to overcome these side effects of doxorubicin in cancer chemotherapy. Regarding the up-regulation of CD13/APN receptors on the cervix carcinoma cells, which can bind to peptide sequences specially NGR (asparagine–glycine–arginine) with high affinity, peptide sequence (NGR) targeted micelles would lead to effective treatment of this carcinoma. In this study, the NGR peptide sequence was synthesized using the solution-phase strategy from asparagine, glycine, and arginine residues. The pullulan–retinoic acid conjugate and pullulan–retinoic acid–NGR conjugate were prepared by the amide and ester bond formation between the hydroxyl groups of pullulan and carboxylic acid groups of retinoic acid and peptide sequence. Pullulan–retinoic acid–NGR micelles were prepared by the direct dissolution method. The optimized micelles, according to their particle size (124.5 nm), zeta potential (? 3.65 mV), entrapment efficiency (85%), and release of DOX (70%, within 72 h) were assessed for their cytotoxicity on HeLa cells using MTT assay. NGR-targeted pullulan/retinoic acid micelles had higher cytotoxicity than the free DOX in cell culture studies on the HeLa cell line, and this can be a promising result in the treatment of cervix carcinoma.     

Collaborative Production: Building Opportunities in Japan

The manner in which buildings are constructed in Japan differs significantly from the United States. My intention here is to discuss flexibilities in production. These flexibilities exist in three chief areas: Original contracts and documents are more schematic, responsibility for document production and detailing can be shared with the contractor, and manufacturing is structured in such a way as to allow for greater customization. The opportunities that emerge as a result of these differences offer a provocative challenge and critique to current U.S. architectural practices.