Chemistry of small organic molecules on snow grains: the applicability of artificial snow for environmental studies

The utilization of artificial snow for environmentally relevant (photo)chemical studies was systematically investigated. Contaminated snow samples were prepared by various methods: by shock freezing of the aqueous solutions sprayed into liquid nitrogen or inside a large walk-in cold chamber at -35 °C, or by adsorption of gaseous contaminants on the surface of artificially prepared pure or natural urban snow. The specific surface area of artificial snow grains produced in liquid nitrogen was determined using valerophenone photochemistry (400-440 cm(2) g(-1)) to estimate the surface coverage by small hydrophobic organic contaminants. The dynamics of recombination/dissociation (cage effect) of benzyl radical pairs, photochemically produced from 4-methyldibenzyl ketone on the snow surface, was investigated. The initial ketone loading, c = 10(-6)-10(-8) mol kg(-1), only about 1-2 orders of magnitude higher than the contaminant concentrations commonly found in nature, was already well below monolayer coverage. We found that the efficiency of out-of-cage reactions decreased at much higher temperatures than those previously determined for frozen solutions; however, the cage effect was essentially the same no matter what technique of snow production or ketone deposition/uptake was used, including the experiments with collected natural snow. The experimental observation that the contaminant molecules are initially self-associated even at the lowest concentrations was supported by DFT calculations. We conclude that, contrary to frozen aqueous solutions, in which the impurities reside in a 3D cage (micropocket), contaminant molecules located on the artificial snow grain surface at low concentrations can be visualized in terms of a 2D cage. Artificial snow thus represents a readily available study matrix that can be used to emulate the natural chemical processes of trace contaminants occurring in natural snow.     

Microfluidic transendothelial electrical resistance measurement device that enables blood flow and postgrowth experiments

Transendothelial electronic resistance (TEER) measurements are performed across a cell layer immobilized on a microfluidic device that also enables the cell layer to interact with a flowing stream of red blood cells (RBCs). A bipolar pulsed square wave potential is applied across a monolayer of bovine pulmonary artery endothelial cells, and the resulting current response is measured and integrated. The overall impedance of the cell layer provides an indicator of cell layer integrity. After cell seeding on the device, a decrease in TEER signal from 22.3 ± 1.6 μC to 3.5 ± 0.4 μC (corresponding to a resistance of 40.9 ± 2.9 Ω·cm(2) to 259.1 ± 27.4 Ω·cm(2)) was observed after 8 h of cell growth. Intracellular nitric oxide (NO) production by the immobilized endothelial cells that had reached confluence was 34% higher than those cells that had not reached confluence, as indicated by the integrated TEER system. Importantly, this NO production by the confluent endothelium was stimulated by ATP released from RBCs flowing under the endothelial cells. In this construct, the described microfluidic device enables both a TEER-based evaluation of cell layer integrity and molecularly communicated interactions of these cells with a flowing stream of blood components.     

Diagnosing Czech Patients with Inherited Platelet Disorders

A single-center study was conducted on 120 patients with inherited disorders of primary hemostasis followed at our hematological center. These patients presented a variety of bleeding symptoms; however, they had no definitive diagnosis. Establishing a diagnosis has consequences for the investigation of probands in families and for treatment management; therefore, we aimed to improve the diagnosis rate in these patients by implementing advanced diagnostic methods. According to the accepted international guidelines at the time of study, we investigated platelet morphology, platelet function assay, light-transmission aggregometry, and flow cytometry. Using only these methods, we were unable to make a definitive diagnosis for most of our patients. However, next-generation sequencing (NGS), which was applied in 31 patients, allowed us to establish definitive diagnoses in six cases (variants in ANKRD26, ITGA2B, and F8) and helped us to identify suspected variants (NBEAL2, F2, BLOC1S6, AP3D1, GP1BB, ANO6, CD36, and ITGB3) and new suspected variants (GFI1B, FGA, GP1BA, and ITGA2B) in 11 patients. The role of NGS in patients with suspicious bleeding symptoms is growing and it changes the diagnostic algorithm. The greatest disadvantage of NGS, aside from the cost, is the occurrence of gene variants of uncertain significance.     

Therapeutic Efficacy and Outcomes of Remdesivir versus Remdesivir with Tocilizumab in Severe SARS-CoV-2 Infection

The infection with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) generated many challenges to find an effective drug combination for hospitalized patients with severe forms of coronavirus disease 2019 (COVID-19) pneumonia. We conducted a retrospective cohort study, including 182 patients with severe COVID-19 pneumonia hospitalized between March and October 2021 in a Pneumology Hospital from Cluj-Napoca, Romania. Among patients treated with standard of care, 100 patients received remdesivir (R group) and 82 patients received the combination of remdesivir plus tocilizumab (RT group). We compared the clinical outcomes, the inflammatory markers, superinfections, oxygen requirement, intensive care unit (ICU) admission and mortality rate before drug administration and 7 days after in R group and RT group. Borg score and oxygen support showed an improvement in the R group (p < 0.005). Neutrophiles, C-reactive protein (CRP) and serum ferritin levels decreased significantly in RT group but with a higher rate of superinfection in this group. ICU admission and death did not differ significantly between groups. The combination of remdesivir plus tocilizumab led to a significantly improvement in the inflammatory markers and a decrease in the oxygen requirement. Although the superinfection rate was higher in RT group than in R group, no significant difference was found in the ICU admission and mortality rate between the groups.     

Model Identification and Control of Electromagnetic Actuation in Continuous Casting Process With Improved Quality

This paper presents an original theoretical framework to model steel material properties in continuous casting line process. Specific properties arising from non-Newtonian dynamics are herein used to indicate the natural convergence of distributed parameter systems to fractional order transfer function models. Data driven identification from a real continuous casting line is used to identify model of the electromagnetic actuator device to control flow velocity of liquid steel. To ensure product specifications, a fractional order control is designed and validated on the system. A projection of the closed loop performance onto the quality assessment at end production line is also given in this paper.      

Comparison of natural convection flows under VHTR type conditions modeled by both the conservation and incompressible forms of the Navier-Stokes equations

This paper illustrates a comparative study to analyze the physical differences between numerical simulations obtained with both the conservation and incompressible forms of the Navier-Stokes equations for natural convection flows in simple geometries. The purpose of this study is to quantify how the incompressible flow assumption (which is based upon constant density advection, divergence-free flow, and the Boussinesq gravitational body force approximation) differs from the conservation form (which only assumes that the fluid is a continuum) when solving flows driven by gravity acting upon density variations resulting from local temperature gradients. Driving this study is the common use of the incompressible flow assumption in fluid flow simulations for nuclear power applications in natural convection flows subjected to a high heat flux (large temperature differences). A series of simulations were conducted on two-dimensional, differentially heated rectangular geometries and modeled with both hydrodynamic formulations. From these simulations, the selected characterization parameters of maximum Nusselt number, average Nusselt number, and normalized pressure reduction were calculated. Comparisons of these parameters were made with available benchmark solutions for air with the ideal gas assumption at both low and high heat fluxes. Additionally, we generated specific force quantities and velocity and temperature distributions to provide a basis for further analysis. The simulations and analysis were then extended to include helium at the Very High Temperature gas-cooled Reactor (VHTR) normal operating conditions. Our results show that the consequences of incorporating the incompressible flow assumption in high heat flux situations may lead to unrepresentative results. The results question the use of the incompressible flow assumption for simulating fluid flow in an operating nuclear reactor, where large temperature variations are present.     

Attentional Biases for Negative Interpersonal Stimuli in Clinical Depression.

An information-processing paradigm was used to examine attentional biases in clinically depressed participants, participants with generalized anxiety disorder (GAD), and nonpsychiatric control participants for faces expressing sadness, anger, and happiness. Faces were presented for 1,000 ms, at which point depressed participants had directed their attention selectively to depression-relevant (i.e., sad) faces. This attentional bias was specific to the emotion of sadness; the depressed participants did not exhibit attentional biases to the angry or happy faces. This bias was also specific to depression; at 1,000 ms, participants with GAD were not attending selectively to sad, happy, or anxiety-relevant (i.e., angry) faces. Implications of these findings for both the cognitive and the interpersonal functioning of depressed individuals are discussed and directions for future research are advanced. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of trichloroethylene on the exploratory and locomotor activity of rats exposed during development

Trichloroethylene (TCE) is a common contaminant of underground water supplies. To examine the effect of TCE on the developing central nervous system, rats were exposed to TCE throughout gestation until 21 days postpartum via their dams' drinking water. TCE concentrations of 312 mg/l, 625 mg/l and 1250 mg/l were tested. Exploratory behavior was higher in 60- and 90-day old male rats which were exposed to any level of TCE. The effect of TCE-exposure on locomotor activity (running wheel) was also examined in 60-day old males (625 and 1250 ppm exposure groups). Locomotor activity was significantly higher in rats exposed to 1250 ppm TCE. These data suggest that TCE has long-term effects on behaviour.