Chronic measurement of the stimulation selectivity of the flat interface nerve electrode

The flat interface nerve electrode (FINE) is an attempt to improve the stimulation selectivity of extraneural electrodes. By reshaping peripheral nerves into elliptical cylinders, central fibers are moved closer to the nerve-electrode interface, and additional surface area is created for contact placement. The goals of this study were to test the hypothesis that greater nerve reshaping leads to improved selectivity and to examine the chronic recruitment properties of the FINE. Three FINEs were developed to reshape peripheral nerves to different degrees. Four electrodes of each type were implanted on the sciatic nerves of 12 cats and tested for selectivity over at least three months. There was physiologic evidence of nerve injury in two cats with the tightest cuffs, but the other animals behaved normally. All cuff types were capable of selectively activating branches of the sciatic nerve, as well as groups of fibers within branches. The electrodes that moderately reshaped the nerves demonstrated the most selectivity. Both the selectivity measurements and the recruitment curve characteristics were stable throughout the implant period. From an electrophysiological standpoint, the FINE is a viable alternative for neuroprosthetic devices. A histological analysis of the nerves is under way to evaluate the safety of the FINE.     

Detection of Carbon Dioxide in Air Using Difference-Frequency Generation Based Infrared Spectrometer

Spectroscopic detection of carbon dioxide (CO₂) in ambient air was performed using a continuous-wave mid-infrared spectrometer based on difference-frequency generation in an AgGaS₂ crystal. Significant improvement in nonlinear optical frequency conversion efficiency was achieved by Gaussian beam optical design consideration. CO₂ concentration was determined from direct-absorption spectral measurement.     

Initialization of Sequential Circuits and its Application to ATPG

A general method for determining whether a certain design is initializable, and for generating its initialization sequence, is presented in this paper. This method is based on structural decomposition of the circuit, and can handle both logical (using X-value simulation) and functional initializability. The routines developed are then used for ATPG of sequential circuits. A pre-test sequence that initializes the good and as many of the faulty machines as possible is generated and used in conjunction with CRIS [5], a simulation based sequential ATPG program, to generate a test set for the circuit.     

Analysis of aperture-coupled microstrip antenna using thesegmentation method

The authors present an original analysis of an aperture-coupled microstrip antenna. The theory is based on the segmentation method, which considers the patch as a multiport network whose impedance matrix is deduced from a hybrid matrix, and the use of analytical expressions of the cavity admittance at the slot centre. The theory is presented for the first time, and the theoretical results are in good agreement with previous published measurements     

Should Russia increase domestic prices for natural gas?

Previous analyses of Russia's dual pricing system and hidden subsidies for natural gas, have neglected to assess the dual pricing system as a domestic environmental policy. If dual pricing is considered as a policy to reduce conventional air pollutants, it is more than economically justified in Russia on the basis of avoided health risks. In the short term, the substitution of coal for natural gas may result in significant additional human health risk, which translates into economic damage. An alternative abatement possibility is expensive and unlikely enforceable, due to weak environmental regulation. The authors conclude that while the price differential can be expected to diminish over time, as Russia increasingly moves to a market economy, in the near-term, dual pricing of natural gas remains the most efficient environmental policy for Russia.     

Lead-acid battery capacity in solar home systems—Field tests and experiences in Lundazi, Zambia

Batteries in solar home systems can cause problems and costs for the users and/or operators of the systems. In Zambia the Lundazi Energy Service Company (LESCO) operates 150 solar home systems on a fee for service basis. The aim of the study was to investigate how the capacity of lead-acid flat plate batteries had changed after one year of operation under real conditions. The results indicate that the batteries capacity has been significantly reduced in comparison to new unused batteries of the same type. Changes in battery management and maintenance, along with additional education of customers on correct use of SHS is advised in order to improve the life span of batteries in practical use.     

Multiobjective optimisation of integrated energy systems for remote communities considering economics and CO2 emissions

The methods for designing, planning and managing integrated energy systems, while holistically considering the major economic and environmental factors, are still embryonic. However, the first phase of the design is often crucial if we want to manage resources better and reduce energy consumption and pollution. Considering integrated energy systems implies dealing with complex systems in which the synergy between the various components is best exploited (for example the thermal energy of a diesel engine produced during the night is complimented by the Rankine organic cycle of a solar thermal plant). The context of isolated communities further increases the difficulties when considering the long distance of transport required to supply fossil fuels. These sites are often located in very precarious environments, with limited or nonexistent resources except for solar energy, and with frequent additional needs for desalination (in arid zones).This paper illustrates a holistic method to rationalize the design of energy integrated systems. It is based on a superstructure (collection of models of all envisaged technologies) and a multi-objective optimisation (resources, demand, energy, emission, costs) using an evolutionary algorithm. The approach proposed allows the identification of more complete and more coherent integrated configurations characterizing the most promising designs (also taking into account the time dependency aspects). It also allows to better structure the information in view of a participative decision approach. The study shows that the economic implementation of renewable energy (solar) is even more difficult, compared to diesel based solutions, in cases of isolated communities with high load variations. New infrastructure or retrofit cases are considered.     

Simulations of electric field domain suppression in a superlattice oscillator device using a distributed circuit model

We present a method for simulating static domain formation in distributed negative differential resistance devices using a distributed circuit array model coupled with quantum transport simulations. This simulation method is applied to the case of a superlattice Bloch oscillator to ascertain the efficacy of electric field domain wall suppression by micro shunt side walls. Two independent simulation mechanisms using the same basic distributed circuit model are employed to separate simulation artifacts from true physical trends. Simulations are presented, suggesting that the presence of the micro shunt can suppress domain formation above a critical device bias voltage. The simulated dependence of this critical voltage on macroscopic device parameters is presented.     

Nanoimprint Lithography Facilitated Plasmonic-Photonic Coupling for Enhanced Photoconductivity and Photocatalysis

Imprint lithography has emerged as a reliable, reproducible, and rapid method for patterning colloidal nanostructures. As a promising alternative to top-down lithographic approaches, the fabrication of nanodevices has thus become effective and straightforward. In this study, a fusion of interference lithography (IL) and nanosphere imprint lithography on various target substrates ranging from carbon film on transmission electron microscope grid to inorganic and dopable polymer semiconductor is reported. 1D plasmonic photonic crystals are printed with 75% yield on the centimeter scale using colloidal ink and an IL-produced polydimethylsiloxane stamp. Atomically smooth facet, single-crystalline, and monodisperse colloidal building blocks of gold (Au) nanoparticles are used to print 1D plasmonic grating on top of a titanium dioxide (TiO₂) slab waveguide, producing waveguide-plasmon polariton modes with superior 10 nm spectral line-width. Plasmon-induced hot electrons are confirmed via two-terminal current measurements with increased photoresponsivity under guiding conditions. The fabricated hybrid structure with Au/TiO₂ heterojunction enhances photocatalytic processes like degradation of methyl orange (MO) dye molecules using the generated hot electrons. This simple colloidal printing technique demonstrated on silicon, glass, Au film, and naphthalenediimide polymer thus marks an important milestone for large-scale implementation in optoelectronic devices.     

Ingestible capsule for impedance and pH monitoring in the esophagus

Twenty-four-hour ambulatory pH monitoring is an essential tool for diagnosing gastroesophageal reflux disease (GERD). Simultaneous impedance and pH monitoring of the esophagus improves the detection and characterization of GERD. Conventional catheter-based monitoring systems are uncomfortable and interfere with the normal activity of the patient. To overcome these disadvantages, different wireless esophageal monitoring systems have been proposed. A capsule containing sensors for impedance and pH monitoring with wireless communication capabilities is presented. A low cost miniature microcontroller was utilized for interfacing between the sensors and a wireless transmitter. The microcontroller program allowed efficient management of the electric power provided by a 3-V battery. Magnetic holding is proposed as an alternative to surgical affixation of the monitoring capsule. Permanent neodymium magnets separated by 27 cm successfully held the capsule in a test tube. Experimental results demonstrated that friction force can aid magnetic holding to overcome peristalsis. The proposed design efficiently detected acid and nonacid reflux. More research regarding the holding method and capsule packaging are necessary to optimize the mechanical performance of the proposed design in order to facilitate clinical testing on human subjects.