Increased conversion efficiency in cadmium telluride photovoltaics by luminescent downshifting with quantum dot/poly(methyl methacrylate) films

Commercially available quantum dots have been encapsulated in a poly(methyl methacrylate) film and used as a luminescent downshifting layer on cadmium sulfide/cadmium telluride photovoltaic devices. Application of these films has resulted in a relative improvement to the short‐circuit current of over 4% by I–V measurement, with a significant increase in the contribution of short‐wavelength light resulting in 25% of the current available in this part of the spectrum being captured. The films have been shown to be highly scattering and the associated difficulties this provides to external quantum efficiency measurements have been discussed. A range of optical characterisation techniques, particularly laser beam induced current, have been used to probe the effect the films have on a cadmium sulfide/cadmium telluride device. An alternate methodology for performing external quantum efficiency measurements with the quantum dot films has been proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Comparison of thin epitaxial film silicon photovoltaics fabricated on monocrystalline and polycrystalline seed layers on glass

We fabricate thin epitaxial crystal silicon solar cells on display glass and fused silica substrates overcoated with a silicon seed layer. To confirm the quality of hot‐wire chemical vapor deposition epitaxy, we grow a 2‐µm‐thick absorber on a (100) monocrystalline Si layer transfer seed on display glass and achieve 6.5% efficiency with an open circuit voltage (V_OC) of 586 mV without light‐trapping features. This device enables the evaluation of seed layers on display glass. Using polycrystalline seeds formed from amorphous silicon by laser‐induced mixed phase solidification (MPS) and electron beam crystallization, we demonstrate 2.9%, 476 mV (MPS) and 4.1%, 551 mV (electron beam crystallization) solar cells. Grain boundaries likely limit the solar cell grown on the MPS seed layer, and we establish an upper bound for the grain boundary recombination velocity (S_GB) of 1.6x10⁴ cm/s. Copyright © 2014 John Wiley & Sons, Ltd.     

Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of the True Operational Range of a Piezoelectric Actuator

Piezoelectric multilayer actuators are technologically important devices used in numerous positioning and force generation applications. During operation, the actuator displacement and force are nonlinearly coupled to the applied electric field, which is often ignored during material characterization. In this study, a novel experimental arrangement is presented that acts like a virtual linear spring, allowing for characterization of the full operational range as a function of applied electric field as well as the true blocking force and impedance matching system stiffness. The macroscopic measurements are contrasted to previous experimental techniques, providing insight into the effect of path dependence on the blocking force.     

Fire‐retardant hybrid thermosetting resins from unsaturated polyesters and polysilazanes

This introduces an organic–inorganic thermosetting hybrid resin system based on unsaturated polyester and polysilazanes. It shows the chemical modification of unsaturated polyester structures by end capping to enable the combination of both components. In general, halogen‐free unsaturated polyesters are not fire‐retardant and have to be equipped with additives. Fillers and intumescent additives are preponderantly used in today's fire‐retardant formulations. In contrast to these fire‐retardants, polysilazanes act as ceramizing agents. Polysilazanes are suitable fire‐retardants for resin transfer molding due to their low viscosity. Both burning behavior and glass transition temperature (T_g) are investigated as important application properties. In contrast to state‐of‐the‐art fire‐retardant formulations polysilazane‐based thermosetting hybrid resins burn with high intensity and fast extinction. Therefore, total heat and smoke emission is decreased. The formation of ceramic structures during burning results in high residual mechanical properties and a low mass loss. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40375.     

Mathematical modeling of the partial hydrogenation of vegetable oil in a monolithic stirrer reactor

Experimental and theoretical studies on the partial hydrogenation of vegetable oil in a monolithic stirrer reactor are reported. A complete mathematical model of the reactor was developed, including hydrogenation and isomerization kinetics, catalyst deactivation, external gas–liquid and liquid–solid as well as internal mass transfer. The experimental studies were carried out in a Pd/Al₂O₃/Al monolithic stirrer reactor, at a wide range of temperatures (353–373 K), pressures (414–552 kPa), and catalyst loadings (0.00084–0.00527 kg_Pd,exp m^?3). Based on this model, simulated data can be used to evaluate the catalyst (Pd/Al₂O₃/Al) and the hydrogenation process in consecutive catalytic tests under different operating conditions. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3524–3533, 2014