Phage-resistant mutants of Lactobacillus delbrueckii may have functional properties that differ from those of parent strains

Three commercial phage sensitive Lactobacillus delbrueckii strains (identified as Ab(1), YSD V and Ib(3)), and four spontaneous phage-resistant mutants isolated from them were tested for their capacity to activate the gut mucosal immune response in mice, as indicated by the numbers of IgA-producing cells. Random Amplified Polymorphic DNA (RAPD) analysis revealed a strong genetic homology between the sensitive strains and their respective derivatives. The phage-resistant mutants exhibited high levels of phage resistance, elevated stability of this phenotype and technological properties comparable to those of their respective parent strains. The tolerance to acidic conditions, bile salts and lysozyme was strain dependent and total cell viability losses as a result of exposure to all three stresses ranged from 2.0 to 3.7 log units. All the strains were highly resistant to a simulated gastric solution of pH 3, while significant additional losses in cell viability were observed when acid treated cells were exposed to bile salts and lysozyme. BALB/c mice received pure cultures of Lb. delbrueckii sensitive and phage-resistant strains for 2, 5 or 7 consecutive days. The ability of the parent strains to activate the small intestine immune response was preserved or enhanced in phage-resistant mutants. The maximal proliferation of IgA(+) cells was observed at day 5 or 7, depending on the strain. Mutants isolated in this study using natural selection strategies had improved phage resistance, adequate technological properties and satisfactory gut mucosal immunostimulation ability, and so would be good candidates for industrial applications in functional foods.     

Contact lens profile: A tale of two countries

Introduction

This study investigated the modality, type and duration of contact lens wear as well as compliance and hygiene related issues (hand and case hygiene, use of tap water, dozing and overnight wear) in the UK and Germany. Questionnaires were collected anonymously from 417 UK and 767 German patients attending optometric practices for contact lens appointments. It is the seventh of a series of contact lens wearer profiles conducted since 2000.

Results

The proportion of rigid gas permeable lenses worn was significantly higher at 55.4% in Germany, compared to 16.1% in the UK. Overall, a significantly larger proportion of German participants used tap water to rinse their lenses and cases (P < 0.001). Also, German respondents changed their lens cases less frequently (p < 0.001). Fewer UK than German respondents stated they washed their hands before lens insertion (p = 0.009), removal (p = 0.01), before eating (p < 0.001). German participants were less likely to wash their hands before preparing food (p = 0.042) and after using the toilet (p = 0.002). The two sample groups differed significantly regarding the care regimens they used for their CLs (p < 0.001).

Conclusion

The differences between Germany and the UK highlighted in this study were caused by differences in legal regulations, plumbing and practitioners’ guidance. Although many of the questions relating to hygiene differed statistically between the two participating sample groups, the absolute differences in figures were not considered to be large.     

Effectiveness of antioxidants in preventing oxidation of palm oil enriched with heme iron: A model for iron fortification in baked products

Bakery products such as biscuits, cookies, and pastries represent a good medium for iron fortification in food products, since they are consumed by a large proportion of the population at risk of developing iron deficiency anemia, mainly children. The drawback, however, is that iron fortification can promote oxidation. To assess the extent of this, palm oil added with heme iron and different antioxidants was used as a model for evaluating the oxidative stability of some bakery products, such as baked goods containing chocolate. The palm oil samples were heated at 220°C for 10 min to mimic the conditions found during a typical baking processing. The selected antioxidants were a free radical scavenger (tocopherol extract (TE), 0 and 500 mg/kg), an oxygen scavenger (ascorbyl palmitate (AP), 0 and 500 mg/kg), and a chelating agent (citric acid (CA), 0 and 300 mg/kg). These antioxidants were combined using a factorial design and were compared to a control sample, which was not supplemented with antioxidants. Primary (peroxide value and lipid hydroperoxide content) and secondary oxidation parameters (p‐anisidine value, p‐AnV) were monitored over a period of 200 days in storage at room temperature. The combination of AP and CA was the most effective treatment in delaying the onset of oxidation. TE was not effective in preventing oxidation. The p‐AnV did not increase during the storage period, indicating that this oxidation marker was not suitable for monitoring oxidation in this model.     

Chemical modification of chloromethylated polysulfones via click reactions

A new approach to the modification of azidomethyl polyethersulfones using click reactions with acetylenic derivatives in the presence of CuBr as catalyst is presented. An azidomethyl polyethersulfone was prepared by the reaction of chloromethylated polysulfone with sodium azide in dimethylformamide. By the Cu(I)‐catalysed Huisgen 1,3‐dipolar cycloaddition reaction of the azidomethyl polyethersulfone to acetylenic derivatives, new polyethersulfones containing 1,2,3‐triazole rings were obtained. The structures of the polymers were confirmed using attenuated total reflectance Fourier transform infrared and NMR spectroscopy. The polymers were characterized using dynamic mechanical analysis, thermogravimetric analysis, stress‐strain and water contact angle measurements and solubility tests. The polymers bearing 1,2,3‐triazole rings having OH or COOH as substituents exhibited static contact angles smaller than that of the parent polyethersulfone. Copyright © 2010 Society of Chemical Industry     

New Evidence for Cross Talk between Melatonin and Mitochondria Mediated by a Circadian-Compatible Interaction with Nitric Oxide

Extending our previous observations, we have shown on HaCat cells that melatonin, at ~10⁻⁹ M concentration, transiently raises not only the expression of the neuronal nitric oxide synthase (nNOS) mRNA, but also the nNOS protein synthesis and the nitric oxide oxidation products, nitrite and nitrate. Interestingly, from the cell bioenergetic point of view, the activated NO-related chemistry induces a mild decrease of the oxidative phosphorylation (OXPHOS) efficiency, paralleled by a depression of the mitochondrial membrane potential. The OXPHOS depression is apparently balanced by glycolysis. The mitochondrial effects described have been detected only at nanomolar concentration of melatonin and within a time window of a few hours’ incubation; both findings compatible with the melatonin circadian cycle.     

The Effect of the Ionizing Radiation on Hydroxyapatite–Polydimethylsiloxane Layers

The bio hydroxyapatite (HAp) was used from a long time in different medical and environmental applications. The HAp layers with a uniform surface were used for various medical applications such as orthopedic and dental metal implants. In this work, we reported on the influence of X‐ray radiation on the structural and morphological properties of composite layers based on HAp and polydimethylsiloxane (PDMS) deposited on titanium substrates. The HAp:PDMS layers were investigated by different complementary methods such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and glow discharge optical emission spectrometry (GDOES). FTIR spectral analysis showed that the molecular structure of the coatings was not changed after their irradiation even though, the depth profile analysis performed by GDOES indicated a depletion of Ca and P elements from the HAp:PDMS irradiated samples. By SEM, we showed that the morphological features of the coatings were also changed, as the irradiated layers are delaminated. The biological assays confirmed that the antibacterial activity of HAp:PDMS composite layers increased after irradiation. The results obtained in this study highlighted that the biological properties of HAp:PDMS layers could be influenced by irradiation. POLYM. ENG. SCI., 59:2406–2412, 2019. © 2019 Society of Plastics Engineers     

Copper(I/II), α/β‐Synuclein and Amyloid‐β: Menage à Trois?

Copper binding to α‐synuclein (aS) and to amyloid‐β (Ab) has been connected to Parkinson's and Alzheimer's disease (AD), respectively, because Cu ions can modulate the peptide aggregation, and these Cu ? peptide complexes can catalyse the production of reactive oxygen species (ROS). In a significant proportion of AD brains, aggregation of aS and Ab has been detected, and it was proposed that Ab and aS interact with each other. Thus, we investigated the potential interactions of Ab and aS through their binding of copper(I) and copper(II). Additionally, β‐synuclein (bS) was investigated, due to its additional methionine residue, a potential Cu^I ligand. We found that: 1) the peptides containing the Cu‐binding domains Ab1–16, aS1–15 and bS1–15 have similar affinities towards Cu^II and towards Cu^I, with Ab1–16 being slightly stronger, 2) in the case of Cu^I, the additional Met residue in bS1–15 increased the affinity slightly, 3) the exchange of Cu^I/II between the two peptides is rapid (≤ms), 4) a/bS1–15 and Ab1–16 form a heterodimeric complex with Cu^II, 5) Cu^I probably promotes a transient ternary complex, 6) the different Cu^I/II coordination of Ab1–16, aS1–15 and bS1–15 impacts the capacity to produce ROS and to oxidise catechol, and 7) when Ab1–16, aS1–15 and Cu are present, the ROS production more closely resembles that by Ab1–16. The work gives insights into the coordination chemistry of these related peptides, and the relevance of coordination differences, the ternary complex and ROS production are discussed.     

Corrosion of YBCO bulk superconductor in air

A corrosion process caused by reaction of surfaces of oxygenation cracks of YBCO bulk single‐grain superconductor with air moisture was studied. X‐ray photo‐emission spectroscopy, done on air exposed (001) surfaces, confirmed oxygen bonds related to barium hydroxide. Thermal analyses and mass spectrometry of exposed samples has shown a release of water caused by decomposition of barium hydroxide hydrates during sample heating. The sample weight increase versus time was related to formation of barium hydroxide phases at the surfaces of oxygenation cracks. The morphological changes of these phases at heating were observed with scanning electron microscope.     

Mechanochemical Synthesis of Magnesium Aluminate Spinel Powder at Room Temperature

MgAl₂O₄ spinel was successfully synthesized using a mechanochemical route that avoided the formation and calcination of its precursors at high temperatures. The method involved a single step in which γ-Al₂O₃–MgO, AlO(OH)–MgO, and α-Al₂O₃–MgO mixtures were milled at room temperature under air atmosphere. The formation of MgAl₂O₄ occurred faster with γ-Al₂O₃ than with AlO(OH) or α-Al₂O₃. After 140 h, the mechanochemical treatment of the γ-Al₂O₃–MgO mixture yielded 99% of MgAl₂O₄.     

Risk of human fatality in building fires: A decision tool using Bayesian networks

The Netherlands is the most densely populated country of the European Union, which makes space very expensive. This leads to increasing complexity of the cities’ layout and other public spaces, together with a large number of people involved. Authorities would like to know whether new and innovative building designs ensure an appropriate level of safety of people in case of fire, before the accident happens, and to be prepared for the so-called “low probability–high consequences” accidents. Therefore, they need a tool to help them estimate the extent of a fire in a building, given any combination of possible conditions and any unexpected course of events during an emergency. This paper discusses the possibility of using Bayesian belief nets for this task. Using this approach, the people in charge can take decisions at different stages of the design process of a building regarding the location, the structure, the loading of the building, the types of fire protection systems inside the building, as well as the characteristics of the fire brigade that fights the possible fire. In the current study, usefulness of the approach is investigated using a small example. This will show the feasibility of the approach for the Netherlands situation and give authorities involved confidence that building a large comprehensive model would fulfil their needs for a support tool in the planning process. The effort to gather real data therefore was restricted as demonstration of fitness for purpose was the primary objective.