Nanodiamond-mediated crystallization in fibers of PANI nanocomposites produced by template-free polymerization: Conductive and thermal properties of the fibrillar networks

The detonation nanodiamond is a novel versatile nanomaterial with tunable properties and surface chemistry. In this work, we report on a template-free method to synthesize polyaniline based nanocomposite fibers during a chemical oxidative precipitation polymerization where the cooperative interactions between nanodiamond and polyaniline nucleates trigger the final morphology of the nanocomposite. FE–SEM and TEM observations evidence the prominent growth of fibril-like structures assembled in 2-D networks of tightly woven, partially oriented fibers. Optical and Raman spectroscopy and X-ray diffraction analyses reveal that the polymer chains are in a protonated emeraldine form and organize themselves in a highly ordered 3-D spatial arrangement. Conductivity measurements performed on isolated fibers by a conductive tip of an AFM apparatus highlight that the diamond filler does not affect the conductive properties of the polyaniline matrix while increases the thermal stability of the polymer as confirmed by TGA studies.     

The catalytic activity of FeOx/ZrO2 for the abatement of NO with propene in the presence of O2

FeO_x/ZrO₂ samples, prepared by impregnation with Fe(NO₃)₃, were characterised by means of DRS, XRD, FTIR, redox cycles and volumetric CO adsorption. Volumetric CO adsorption, combined with FTIR, showed that 45% of iron in the sample containing 2.8 Fe atoms nm⁻² was capable of forming iron carbonyls. DRS evidenced Fe₂O₃ on samples with Fe-content≥2.8 atoms nm⁻². The selective catalytic reduction of NO with C₃H₆ in the presence of O₂ was studied with a reactant mixture containing NO=4000 ppm, C₃H₆=4000 ppm, O₂=2%. The dependence on iron-content suggests that only isolated iron, prevailing in dilute FeO_x/ZrO₂, is active for NO reduction, whereas iron on the surface of small oxide particles, prevailing in concentrated FeO_x/ZrO₂, is active for C₃H₆ combustion.     

A potent integrin antagonist from a small library of cyclic RGD pentapeptide mimics including benzyl-substituted azabicycloalkane amino acids

A small library of cyclic RGD pentapeptide mimics, including benzyl-substituted azabicycloalkane amino acids, was synthesized with the aim of developing active and selective integrin antagonists. In vitro binding assays established one particular compound with affinity for both the alpha(v)beta(3) and the alpha(v)beta(5) integrins. The synthesis in solution and the in vitro screening of these RGD derivatives, as well as the determination of the conformational properties of the integrin ligands by spectroscopic and computational methods are described.     

Conjugated Linoleic Acid Isomers Reduce Cholesterol Accumulation in Acetylated LDL-Induced Mouse RAW264.7 Macrophage-Derived Foam Cells

Synthetic activators of peroxisome proliferator-activated receptors (PPAR)-alpha and -gamma are capable of reducing macrophage foam cell cholesterol accumulation through the activation of genes involved in cholesterol homeostasis. Since conjugated linoleic acids (CLA) were also demonstrated to activate PPARalpha and PPARgamma in vivo and in vitro, we tested the hypothesis that CLA are also capable of reducing macrophage foam cell cholesterol accumulation. Thus, mouse RAW264.7 macrophage-derived foam cells were treated with CLA isomers, c9t11-CLA and t10c12-CLA, and linoleic acid (LA), as reference fatty acid, and analyzed for the concentrations of free and esterified cholesterol, cholesterol efflux and expression of genes involved in cholesterol homeostasis (CD36, ABCA1, LXRalpha, NPC-1, and NPC-2). Treatment with c9t11-CLA and t10c12-CLA, but not LA, lowered cholesterol accumulation, stimulated acceptor-dependent cholesterol efflux, and increased relative mRNA concentrations of CD36, ABCA1, LXRalpha, NPC-1, and NPC-2 (P < 0.05). In conclusion, the present study showed that CLA isomers reduce cholesterol accumulation in RAW264.7 macrophage-derived foam cells presumably by enhancing lipid acceptor-dependent cholesterol efflux.     

Characterization of single-walled carbon nanotube mats and their performance as electromechanical actuators

Carbon nanotube mats (buckypapers) were prepared from three commercial grades of single-walled carbon nanotubes (SWCNTs) and by two processing variants (i.e. filtration of centrifuged and uncentrifuged dispersions). Material properties such as Young’s modulus, tensile strength, electrical conductivity, electrical capacitance, specific surface area and morphology were investigated and put in relation to the in-plane actuation performance in an aqueous electrolyte (1 M NaCl). A dynamic mechanical analyzer was adapted for actuation strain measurements on the samples under various tensile prestress levels. High SWCNT purity and dispersibility were found to be crucial for preparing dense and strong cohesive mats with good actuation performance.     

Evaluation of a bacteriocin-producing strain of Pediococcus acidilactici as a biopreservative for “Alheira”, a fermented meat sausage

This study was conducted to evaluate the ability of Pediococcus acidilactici HA-6111-2, a PA-1 bacteriocin-producing lactic acid bacterium (LAB), isolated from “Alheira” to inhibit a cocktail of Listeria innocua strains during production and shelf-life of these products. The bacteriocinogenic culture reduced the Listeria population below the detection limit (1.5log CFU/g) and had no effect on the growth of the natural LAB flora or on the pH. Pathogenic organisms were not detected in any sample. The presence of some virulence factors and antibiotic resistances of the strain to be used as a bioprotective culture were investigated. P. acidilactici HA-6111-2 did not produce any of the biogenic amines tested; no formation of biofilms was observed; more l(+)lactic acid was produced than its isomer d(?); no gelatinase, DNase or lipase activity was recorded; no structural genes for the haemolysin, enterococcal surface protein, hydrolytic compounds, aggregation protein and cell-wall adhesins were detected, no significant antibiotic resistances were found. P. acidilactici HA-6111-2 appears to have potential as a bioprotective culture during “Alheira” fermentation. Moreover, a trained panel considered the protected product to be sensorially acceptable.     

Impact of three different TiO2 morphologies on hydrogen evolution by methanol assisted water splitting: Nanoparticles, nanotubes and aerogels

Increasing the activity of a photocatalyst goes through the improvement of both its absorption (light) and adsorption (reactant) properties. For a given semiconducting material, the charge carrier separation is also a very important step. Properly combining chosen phases is one option to improve this separation (example of the commercial P25) and depositing platinum on the surface of the catalyst, another one. In some cases, coupling both may nevertheless lead to a decrease of photoactivity or at least limit the potentiality of the catalyst. A third option, consisting in modifying the morphology of the photoactive phase, has shown very promising results.In this study, we have elaborated, characterized and evaluated the hydrogen evolution potentiality (through methanol assisted water splitting) of different TiO₂ morphologies: nanoparticles, nanotubes and aerogels. These materials have shown different behaviours depending on both their composition and morphology. Different types of separation processes have been claimed to account for the observed different photoactivities, with more or less pronounced synergetic effects, due to: the use of Pt as a co-catalyst, the mixture of different TiO₂ phases (anatase and TiO₂(B) or rutile) and the specific morphology of the samples (nanotubes or aerogels). Among all the tested samples, the TiO₂ aerogel supported Pt one exhibited very promising performances, three times as active as P25 supported Pt, which is already much more active than pure P25 in our testing conditions.     

Design of an integrated low-noise read-out system for DNA capacitive sensors

This paper presents an electronic system for a fast DNA label-less detection. The sensitivity of the capacitive sensor in use is improved by depositing an insulating self-assembled monolayer (SAM) over the golden electrodes. The capacitance shift due to the hybridization effect is monitored by means of a charge-sensitive amplifier and digitalized by means of a comparator and a counter. The read-out solution demonstrates the ability to identify a 0.01% variation on the capacitive value of the sensor. Results from measurements with the optimized sensor show the reliability of the electronics. The investigated solution is suitable for monolithic systems or for a micro-fabricated array of sensors. An example of the integrated front-end is described and performances and noise evaluation are reported here.