Pulse height defect in pCVD and scCVD diamond based detectors

Polycrystalline (pCVD) and single crystal (scCVD) diamond films grown from Chemical Vapour Deposition (CVD), if sufficiently pure at Raman analysis, are very good materials for beam or flux monitors inside accelerators or nuclear reactors. This is because they are very hard to damage in high radiation fields and very resistant to high temperatures. Films of pCVD diamond are, however, not so good as spectroscopy detectors due to inhomogeneities induced by their growth in grains with the consequent presence of grain boundaries which worsen their energy resolution. The latter can be significantly improved by growing scCVD diamond films onto HPHT synthetic diamond substrates. We have shown that it is possible to measure the density of defects inside diamond specimens using as probes suitable penetrating nuclear radiations. With the preliminary results reported here we'll show that, bombarding CVD diamond films grown at Roma “Tor Vergata” with energetic protons and ⁴He, ⁶Li and ¹²C ions produced in the accelerators of Catania laboratories, the pulse height defects are higher than those in silicon detectors and likewise well described by a power law in the deposited energy. Furthermore, we'll show that pulse heights for the same particles seem to depend on the duration of the measurement, thus exhibiting a sort of depolarization of the insulator when exposed to the electric voltage which makes it a particle detector.     

Evaluation of the thermal and mechanical properties of poly(ε‐caprolactone), low‐density polyethylene,and their blends

The thermal and mechanical properties of low‐density polyethylene (LDPE), poly(ε‐caprolactone) (PCL), and their blends were evaluated. Differential scanning calorimetry showed that increasing the PCL content of the blend did not change the LDPE melting temperature, but reduced the crystallinity by up to 16.8%. This behavior was related to interactions between the PCL chains and the crystalline phase of LDPE. Tensile strength and elongation at break values for the blends were lower than those for the pure polymers, which suggested an incompatibility between the polymers. The values for Young's modulus under tensile increased when PCL was added to LDPE. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91:3909–3914, 2004     

Total content and dialyzable iron and zinc in foods from northern and Southern Mexico

Developing countries diets are based on a variety of plant foods that often are the main suppliers of important amounts of iron (Fe) and zinc (Zn). The objectives of this study were 1) to measure the total and dialyzable amounts of Fe and Zn in foods from Northern Mexico (Sonora) and from Southern Mexico (Oaxaca) and 2) to evaluate the effect of meat content of diets on the dialyzable amount of Fe and Zn. Methods to calculate the total dialyzable amount of Fe and Zn, were those of the AOAC and of Shen et al. Total Fe in e northern Mexican foods went from 0.78 +/- 0.0 to 11.59 +/- to 0.03 mg/ 100g (dry weight, DW); in southern Mexican foods the same micronutrient amounts were 0.86 +/- 0.18 to 8.8 +/- 0.57 mg/100 g (BS). Total Zn values were 0.91 +/- 0.00 to 13.58 +/- 0.05 mg/100 g (DW) in Sonora, and 0.64 +/- 0.18 to 20.80 +/- 0.33 mg/100 g (DW) in Oaxaca. In northern Mexico, foods dialyzable Fe had values from 0.1 +/- 0.04% to 10.6 +/- 0.36% and for Zn from 4.0 +/- 0.21% to 55.32 +/- 0.14%. Meanwhile, the range of values of dialyzable Fe for foods from Oaxaca were from 0.22 +/- 0.06% to 9.40 +/- 0.14% for and from 2.41 +/- 0.26% to 54.27 +/- 1.49% for dialyzable Zn. The average value for dialyzable Fe was higher in the foods that contained meat or meat products (p= 0.001).     

A low-cost real time virtual system for postural stability assessment at home

Background and objective

The degeneration of the balance control system in the elderly and in many pathologies requires measuring the equilibrium conditions very often. In clinical practice, equilibrium control is commonly evaluated by using a force platform (stabilometric platform) in a clinical environment.In this paper, we demonstrate how a simple movement analysis system, based on a 3D video camera and a 3D real time model reconstruction of the human body, can be used to collect information usually recorded by a physical stabilometric platform.

Methods

The algorithm used to reconstruct the human body model as a set of spheres is described and discussed. Moreover, experimental measurements and comparisons with data collected by a physical stabilometric platform are also reported. The measurements were collected on a set of 6 healthy subjects to whom a change in equilibrium condition was stimulated by performing an equilibrium task.

Results

The experimental results showed that more than 95% of data collected by the proposed method were not significantly different from those collected by the classic platform, thus confirming the usefulness of the proposed system.

Conclusions

The proposed virtual balance assessment system can be implemented at low cost (about 500$) and, for this reason, can be considered a home use medical device. On the contrary, astabilometric platform has a cost of about 10,000$ and requires periodical calibration. The proposed system does not require periodical calibration, as is necessary for stabilometric force platforms, and it is easy to use. In future, the proposed system with little integration can be used, besides being an emulator of a stabilometric platform, also to recognize and track, in real time, head, legs, arms and trunk, that is to collect information actually obtained by sophisticated optoelectronic systems.     

Catalysts based in cerium oxide for wet oxidation of acrylic acid in the prevention of environmental risks

Acrylic acid is a refractory compound for the non-catalytic wet oxidation (WO) process and can seriously damage the environment when released in industrial effluents. Oxidation of acrylic acid by catalytic wet oxidation (CWO) was studied in slurry conditions in a high-pressure batch reactor at 200 °C and 15 bar of oxygen partial pressure. Several solid cerium-based catalysts prepared in our laboratory were used (Ag/Ce, Co/Ce, Mn/Ce, CeO, MnO) and evaluated in terms of activity, selectivity and stability. Mn/Ce shows the higher activity in 2 h with 97.7% reduction of total organic carbon (TOC) followed by: MnO(95.5%)>Ag/Ce(85.0%)>Co/Ce(65.1%)>CeO(61.2%). Attempts were also carried out to analyze the influence of different Mn/Ce molar ratios. High percentages of Mn lead to practically total organic carbon concentration (TOC) abatements while low ratios lead to the formation of non-oxidizable compounds. Acrylic acid was readily degraded by all the catalysts pointing out the high importance of using a catalytic process. pH was an indicator of the reaction pathway and acetic acid was found as the major reaction intermediate compound; however it is completely oxidized after 2 h with exception for Co/Ce, CeO and MnO. Carbon adsorption and leaching of metals were poorly found for Mn/Ce indicating high stability. The catalyst microstructure after the reaction was analyzed and formation of whiskers of β-MnO₂ (or less probably MnOOH) were observed at the catalyst surface. Therefore, Mn/Ce revealed to be a promising catalyst for the treatment of effluents containing acrylic acid; nevertheless, its commercialization depends on further research.     

Mechanical properties of recycled polyethylene ecocomposites filled with natural organic fillers

The use of natural organic fillers in addition to postconsumer recycled polymers is getting a growing interest during the last years; this is due to many advantages they can provide in terms of cost, aesthetic properties, environmental impact. In this work, several types of wood flour (differing each other with regard to production source and particle size) were added to a recycled polyethylene coming from films for greenhouses and the effects of filler type, content, and size were investigated. Investigation was then focused on the improvement of mechanical properties, through the addition of polar copolymers (ethylene‐co‐acrylic acid, ethylene‐vinyl acetate) and a maleic anhydride‐grafted‐grafted polyethylene (Licocene® PE MA 4351 TP), in order to try to overcome the poor adhesion between polar filler particles and nonpolar polymer chains. Investigation was also based on SEM micrographs. An overall positive influence of these additives was observed. Polym. Eng. Sci. 46:1131–1139, 2006. © 2006 Society of Plastics Engineers.     

解读"教育为人民服务"

党的十六大报告中明确了教育在现代化建设中的作用和地位 :“教育是发展科学技术和培养人才的基础 ,在现代化建设中具有先导性全局性作用 ,必须摆在优先发展的战略地位”。同时指出教育的功能是 :“全面贯彻党的教育方针 ,坚持教育为社会主义现代化建设服务 ,为人民服务 ,与生产劳动和社会实践相结合 ,培养德、智、体、美、劳全面发展的社会主义建设者和接班人”。十六大提出了一个新的教育理念 ,这就是教育为人民服务。1　“教育为人民服务”是“三个代表”重要思想在教育观念上的具体体现“为人民服务”是毛泽东同志在 1 944年为纪念一个…     

Effect of low‐temperature plasma and chitosan treatment on wool dyeing with Acid Red 27

This study examines in detail the influence of low‐temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink‐resistance measurements. Surface modification was assessed by contact‐angle measurements of human hair fibers, which were used as a model to study the wetting properties of the treated wool knitted fabrics. The dyeing behavior was assessed from the diffusion mechanism point of view. The dyeing kinetics were measured at two different pHs (4.2 and 6.5) and three different temperatures (60, 85, and 100°C) to gain information about the contribution of the surface modification treatment to the dyeing mechanism. The exhaustion and reflectance data were compared, and the apparent diffusion coefficients were calculated. On the basis of the obtained results, a model for the dyeing mechanism of the chitosan treated wool was proposed. When treated with chitosan, the polymer sheath spread on the surface of the fibers acted as a predominant dyeing site in very short dyeing times, thus interacting with the dye and in later stages imparting the dye to the wool fiber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2204–2214, 2005     

Surface properties of fluorinated hybrid coatings

A commercial perfluoropolyether containing alkoxysilane functionalities was employed to prepare organic–inorganic hybrid coatings by using the sol‐gel process in the presence of tetraethoxysilane. Contact angle analysis revealed a strong hydrophobic and oleophobic character of the coatings almost independently from the molecular weight of the starting fluorinated oligomer. Surface tension values were in the range of 14–16 mN/m, suggesting a preferential segregation of fluorinated segments onto the surface of the coating. Atomic force microscopy showed the presence very smooth surfaces permitting to neglect the contribution of the surface roughness to wettability. Friction coefficient values were markedly lower with respect to the value of uncoated glass substrate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1483–1488, 2006     

In vitro comparison of hepatic metabolism of 9cis-11 trans and 10trans-12cis isomers of CLA in the rat

Hepatic metabolism of the two main isomers of CLA (9cis-11 trans, 10trans-12cisC_18∶2) was compared to that of oleic acid (representative of the main plasma FA) in 16 rats by using the in vitro method of incubated liver slices. Liver tissue samples were incubated at 37°C for 17h under an atmosphere of 95% O₂/5%CO₂ in a medium supplemented with 0.75 mM of FA mixture (representative of circulating nonesterified FA) and with 55 μM [1-¹⁴C]9cis-11 trans C_18∶2, [1-¹⁴C]10trans-12cis C_18∶2, or [1-¹⁴C]oleate. The uptake of CLA by hepatocytes was similar for both isomers (9%) and was three times higher (P<0.01) than for oleate (2.6%). The rate of CLA isomer oxidation was two times higher (49 and 40% of incorporated amounts of 9cis-11 trans and 10trans-12 cis, respectively) than that of oleate (P<0.01). Total oxidation of oleate and CLA isomers into [¹⁴CO₂] was low (2 to 7% of total oxidized FA) compared to the partial oxidation (93 to 98%) leading to the production of [¹⁴C] acid-soluble products. CLA isoemrs escaping from catabolism were both highly desaturated (26.7 and 26.8%) into conjugated 18∶3. Oleate and CLA isomers were mainly esterified into neutral lipids (30%). They were slowly secreted as parts of VLDL particles (<0.4% of FA incorporated into cells), the extent of secretion of oleate and of 10trans-12 cis being 2.2-fold higher than that of 9cis-11 trans (P<0.02). In conclusion, this study clearly showed that both CLA isomers were highly catabolized by hepatocytes, reducing their availability for peripheral tissues. Moreover, more than 25% of CLA escaping from catabolism was converted into conjugated 18∶3, the biological properties of which remain to be elucidated.