Buccal tablets containing cysteine and chlorhexidine for the reduction of acetaldehyde levels in the oral cavity

There is growing evidence that a large proportion of upper digestive tract tumors are ascribable to heavy alcohol drinking and tobacco consumption. The cancer-promoting action of ethanol is mediated by acetaldehyde, its first metabolite, also derived from the bacterial oxidation of alcohol by the oral microflora, classified by the International Agency for the Research on Cancer as a carcinogen. Acetaldehyde is also one of the major components of tobacco smoke. These findings suggest two different strategies to decrease the risk of alcohol-related oral cancers: the reduction of the levels of alcohol-derived acetaldehyde in saliva and the reduction of oral bacterial flora. Therefore, the aim of our study was to develop and characterize some buccal tablet formulations containing both 20 mg L-cysteine hydrochloride (able to chemically neutralize acetaldehyde) and 10 mg chlorhexidine diacetate (well-known antiseptic compound active against a large spectrum of oral microbes). One of these formulations, chosen on the basis of its favourable delivery kinetics of the active principles, was demonstrated to be able to reduce acetaldehyde concentration in an in vitro system and to lower its salivary levels in volunteers after ethanol contact. Our findings support the hypothesis that the application of buccal devices containing cysteine and chlorhexidine could reduce salivary acetaldehyde levels and thus the incidence of upper gastrointestinal cancer in drinkers and smokers.     

Enhanced antibacterial effect of silver nanoparticles obtained by electrochemical synthesis in poly(amide-hydroxyurethane) media

In the present study, we report enhanced antimicrobial properties of 29 and 23 nm silver nanoparticles (Ag NPs) obtained by electrochemical synthesis in poly(amide-hydroxyurethane) media. Antibacterial activity assessed by disk diffusion method indicates that silver nanoparticles produced inhibition zones for both Escherichia coli and Staphylococcus aureus depending on silver concentration. The bacterial growth curve performed in the presence of silver nanoparticles showed a stronger antibacterial effect at lower concentrations than those described in the earlier reports. The effect was both dose and size dependent and was more pronounced against Gram negative bacteria than Gram positive one. The smallest Ag NPs used had a bactericidal effect resulting in killing E. coli cells. Scanning electron microscopy analysis indicated major damage and morphology changes of the silver nanoparticles treated bacterial cells. The major mechanism responsible for the antibacterial effect probably consists in clusters formation and nanoparticles anchorage to the bacterial cell surface.     

Direct electrospray ionization mass spectrometry quantitative analysis of sebacic and terephthalic acids in biodegradable polymers

A direct, rapid, and easy electrospray ionization mass spectrometry (ESI-MS) method to determine concentrations of sebacic acid (SA) and terephthalic acid (TA) residues in biodegradable copolymers was developed. Copolyester samples were synthesized from 1,4-butanediol and sebacic and terephthalic acids by melt polymerization. Extraction of monomers was performed in methanol. Their concentrations were determined by direct infusion ESI-MS, without chromatographic separation, using 1,12-dodecanedioic acid (DDA) as an internal standard. Calibration curves were obtained by plotting the ratio of the areas of the peaks relative to monomers and DDA standard as a function of their concentration ratio. We validated the method by determining the concentration of TA residue using both the ESI-MS protocol and high-performance liquid chromatography (HPLC) analysis with UV detection. The linearity range and the detection limit of this assay were 0.1-5.0 and 0.01 ppm for SA and 0.1-6.0 and 0.03 ppm for TA. This assay represents a useful alternative to conventional methods currently employed for acid quantification, resulting advantageous for its speed and high sensitivity.     

Polymer nanocomposites based on epoxy resin and ATH as a new flame retardant for CFRP: preparation and thermal characterisation

Nanoscale aluminium trihydroxide (ATH) is examined to its suitability for carbon fibre reinforced plastics (CFRP) as a novel flame retardant. In particular the influence of particle size and concentration of ATH to the fire behaviour of epoxy polymer matrices is determined. The particle size is adjusted by means of different dispersing techniques. By SEM images and viscosity measurements the homogeneity of the produced ATH dispersions for the liquid ones and of cured epoxy–ATH nanocomposites is determined. Based on these pre-results, selected ATH dispersions are used for the manufacturing of CFRP which are produced by the proved injection technology. The thermal stability of the ATH nanocomposite plates and the corresponding CFRP plates are analyzed by means of quantitative single difference thermoanalysis (QSDTA). The fire behaviour is characterised by using the OSU chamber test. Both tests indicate a reduced heat release rate by decreasing the ATH particle size, i.e. the thermal load decreases. A combined fire protection mechanism is discussed for the improved fire protection through ATH nanoparticles.     

Speed up of Video Enhancement based on Human Perception

This paper presents SUVEHP (speed up of video enhancement based on human perception), a human perception-based model oriented to reduce the computational time of digital video restoration. In particular, two specific hypothesis tests able to classify degraded frame regions are proposed. Classification is performed in agreement with regions visual significance in order to enable or inhibit motion compensated enhancement. The level of the proposed hypothesis tests is theoretically assessed. Moreover, extensive experimental results on video sequences affected by additive Gaussian noise show that SUVEHP speeds up some standard motion compensated denoisers up to 60%, preserving or even slightly increasing both the objective and subjective visual quality of the restored sequences.     

In situ Characterization of SiO2 Nanoparticle Biointeractions Using BrightSilica

By adding a gold core to silica nanoparticles (BrightSilica), silica‐like nanoparticles are generated that, unlike unmodified silica nanoparticles, provide three types of complementary information to investigate the silica nano‐biointeraction inside eukaryotic cells in situ. Firstly, organic molecules in proximity of and penetrating into the silica shell in live cells are monitored by surface‐enhanced Raman scattering (SERS). The SERS data show interaction of the hybrid silica particles with tyrosine, cysteine and phenylalanine side chains of adsorbed proteins. Composition of the biomolecular corona of BrightSilica nanoparticles differs in fibroblast and macrophage cells. Secondly, quantification of the BrightSilica nanoparticles using laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) micromapping indicates a different interaction of silica nanoparticles compared to gold nanoparticles under the same experimental conditions. Thirdly, the metal cores allow the investigation of particle distribution and interaction in the cellular ultrastructure by cryo nanoscale X‐ray tomography (cryo‐XT). In 3D reconstructions the assumption is confirmed that BrightSilica nanoparticles enter cells by an endocytotic mechanism. The high SERS intensities are explained by the beneficial plasmonic properties due to agglomeration of BrightSilica. The results have implications for the development of multi‐modal qualitative and quantitative characterization in comparative nanotoxicology and bionanotechnology.     

Untersuchungen zum Abbau von Maillard-Reaktionsprodukten durch amylolytische Enzyme

The enzymatic degradation of thermal treated α-glucans with amylolytic enzymes depends on the reaction environment (T, pH, moisture), the degree of polymerisation (DP) and the branch of the substrates as well as on the presence of amino compounds. The chemical changes of the α-glucans due to thermolysis at 180 °C are characterized by means of the amount of reducing substances and the amount of maltooligosaccharides (HPLC). In general the enzymatic degradability of the thermal treated α-glucans is decreased with increasing time of thermolysis, temperature and moisture content. The enzyme activity with the thermal treated α-glucans is diminished in the same way. The addition of amino compounds reduces the enzymatic degradability only at the beginning of the reaction. With increasing time of thermolysis the thermolysates without glycine addition are hardly degradated. As reason for these differences in the enzymatic degradation transglycosylation and non-enzymatic browning reactions (caramalisation/ Maillard-reaction) are assumed.     

Concept formation from design cases: why reusing experience and why not

This paper describes an environment that supports novice information systems designers in initial concept formation by organising design `cases' in evolving networks, automatically clustered by a neural agent to suggest generalisations of design patterns. Flexible reframing of the cases also supports creativity by uncovering less obvious but relevant design concepts. If the responsibility, of linking related design cases is distributed to a population of learners who contribute their cases and tentative generalisations, genetic techniques can be applied to sustain the evolution of the base of cases towards ontological forms that better guide and constrain the case reuse process, thus supporting knowledge transfer.     

Mechanochemical Synthesis of Magnesium Aluminate Spinel Powder at Room Temperature

MgAl₂O₄ spinel was successfully synthesized using a mechanochemical route that avoided the formation and calcination of its precursors at high temperatures. The method involved a single step in which γ-Al₂O₃–MgO, AlO(OH)–MgO, and α-Al₂O₃–MgO mixtures were milled at room temperature under air atmosphere. The formation of MgAl₂O₄ occurred faster with γ-Al₂O₃ than with AlO(OH) or α-Al₂O₃. After 140 h, the mechanochemical treatment of the γ-Al₂O₃–MgO mixture yielded 99% of MgAl₂O₄.