Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy

The thermoacoustic effect of isolated single‐wall carbon nanotubes aligned between electrodes is experimentally observed for the first time by imaging the emitted acoustic wave using an atomic force microscopy‐based technique specifically developed for the task. The capability of such a technique for single‐point thermoacoustic measurements is first verified on carbon nanotubes layers with two electrodes for injecting alternate electric current. The technique is then demonstrated to allow the acquisition, simultaneously with the topography, of images reflecting the pressure of the acoustic wave at fixed distance from the sample. Such a capability is used to collect images reflecting the amplitude of acoustic waves generated by isolated nanotubes and nanotube bundles by the thermoacoustic effect.     

The world is not flat: Can people reorient using slope?

Studies of spatial representation generally focus on flat environments and visual input. However, the world is not flat, and slopes are part of most natural environments. In a series of 4 experiments, we examined whether humans can use a slope as a source of allocentric, directional information for reorientation. A target was hidden in a corner of a square, featureless enclosure tilted at a 5° angle. Finding it required using the vestibular, kinesthetic, and visual cues associated with the slope gradient. In Experiment 1, the overall sample performed above chance, showing that slope is sufficient for reorientation in a real environment. However, a sex difference emerged; men outperformed women by 1.4 SDs because they were more likely to use a slope-based strategy. In Experiment 2, attention was drawn to the slope, and participants were prompted to rely on it to solve the task; however, men still outperformed women, indicating a greater ability to use slope. In Experiment 3, we excluded the possibility that women's disadvantage was due to wearing heeled footwear. In Experiment 4, women required more time than men to identify the uphill direction of the slope gradient; this suggests that, in a bottom-up fashion, a perceptual or attentional difficulty underlies women's disadvantage in the ability to use slope and their decreased reliance on this cue. Overall, a bi-coordinate representation was used to find the goal: The target was encoded primarily with respect to the vertical axis and secondarily with respect to the orthogonal axis of the slope. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB<Subscript>2</Subscript> Composites Produced by Direct Metal Laser Sintering (DMLS)

Direct metal laser sintering (DMLS) is an additive manufacturing technique for the production of parts with complex geometry and it is especially appropriate for structural applications in aircraft and automotive industries. Aluminum-based metal matrix composites (MMCs) are promising materials for these applications because they are lightweight, ductile, and have a good strength-to-weight ratio This paper presents an investigation of microstructure, hardness, and tribological properties of AlSi10Mg alloy and AlSi10Mg alloy/TiB₂ composites prepared by DMLS. MMCs were realized with two different compositions: 10% wt. of microsize TiB₂, 1% wt. of nanosize TiB₂. Wear tests were performed using a pin-on-disk apparatus on the prepared samples. Performances of AlSi10Mg samples manufactured by DMLS were also compared with the results obtained on AlSi10Mg alloy samples made by casting. It was found that the composites displayed a lower coefficient of friction (COF), but in the case of microsize TiB₂ reinforcement the wear rate was higher than with nanosize reinforcements and aluminum alloy without reinforcement. AlSi10Mg obtained by DMLS showed a higher COF than AlSi10Mg obtained by casting, but the wear rate was higher in the latter case.     

Evaluation of surface/interface quality,microstructure and mechanical properties of hybrid additive-subtractive aluminium parts

A disadvantage of selective laser melting (SLM) processes for the manufacture of large parts is their slow build time per unit volume. A hybrid route is to generate core simple shapes traditionally, for example by machining, followed by adding final features by SLM. Here the mechanical integrity of such hybrid parts is studied, choosing the building of AlSi10Mg by SLM on a machined AA6082 base, in the shape of a tensile test piece, as a simple example. These materials are chosen for their relevance to lightweight parts. As-built parts fail at the SLM/machined interface but standard heat treatments transfer failures to the machined material. Optimised SLM processing conditions and microstructures of the SLM and interfacial regions are reported.     

Processing and thermal properties of composites based on recycled PET,sisal fibers,and renewable plasticizers

This investigation focuses on the preparation of bio‐based composites from recycled poly (ethylene terephthalate) (PET) and sisal fibers (3 cm, 15 wt %), via thermopressing process. Plasticizers derived from renewable raw materials are used, namely, glycerol, tributyl citrate (TBC) and castor oil (CO), to decrease the melting point of the recycled PET (T_m ∼ 265°C), which is sufficiently high to initiate the thermal decomposition of the lignocellulosic fiber. All used materials are characterized by thermogravimetric analysis and differential scanning calorimetry, and the composites are also characterized via dynamic mechanical thermal analysis. The storage modulus (30°C) and the tan δ peak values of CT [PET/sisal/TBC] indicate that TBC also acts as a compatibilizing agent at the interface fiber/PET, as well as a plasticizer. To compare different processing methods, rheometry/thermopressing and compression molding are used to prepare the recycled PET/sisal/glycerol/CO composites. These two different methods of processing show no significant influence on the thermal properties of these composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40386.     

Intrinsic second-order nonlinearity in chalcogenide glasses containing HgI2

Frequency conversion using nonlinear optical (NLO) crystals is widely used in advanced photonic technologies to produce coherent light in the spectral regions where the available laser sources are missing. Isotropic glasses usually do not show second order nonlinear processes like second harmonic or difference frequency generation (SHG, DFG) except for temporarily induced anisotropy under external stimuli. Here, we show that a HgI₂–Ga₂S₃–GeS₂ homogeneous glass exhibits a strong intrinsic SHG response comparable with that of the well-known NLO single crystal LiNbO₃. The origin of this extremely rare phenomenon seems to be noncentrosymmetric bent HgI₂ molecules embedded in a sulfide glassy host. Taking into account the unique properties of chalcogenide glasses (wide IR transmission, low phonon density, unlimited ability to be modified changing the appropriate glass properties, fiber drawing and thin layer design), the observed phenomenon opens up the possibility of creating fundamentally new devices for mid-IR photonics.     

The Genetic Basis of Primary Myelofibrosis and Its Clinical Relevance

Among classical BCR-ABL-negative myeloproliferative neoplasms (MPN), primary myelofibrosis (PMF) is the most aggressive subtype from a clinical standpoint, posing a great challenge to clinicians. Whilst the biological consequences of the three MPN driver gene mutations (JAK2, CALR, and MPL) have been well described, recent data has shed light on the complex and dynamic structure of PMF, that involves competing disease subclones, sequentially acquired genomic events, mostly in genes that are recurrently mutated in several myeloid neoplasms and in clonal hematopoiesis, and biological interactions between clonal hematopoietic stem cells and abnormal bone marrow niches. These observations may contribute to explain the wide heterogeneity in patients’ clinical presentation and prognosis, and support the recent effort to include molecular information in prognostic scoring systems used for therapeutic decision-making, leading to promising clinical translation. In this review, we aim to address the topic of PMF molecular genetics, focusing on four questions: (1) what is the role of mutations on disease pathogenesis? (2) what is their impact on patients’ clinical phenotype? (3) how do we integrate gene mutations in the risk stratification process? (4) how do we take advantage of molecular genetics when it comes to treatment decisions?     

FT-NIR spectroscopy for the quality characterization of apricots (Prunus armeniaca L.)

Abstract: The nondestructive assessment of apricot fruit quality (Bora cultivar) was carried out by means of FT-NIR reflectance spectroscopy in the wavenumber range 12000 to 4000 cm⁻¹. Samples were harvested at four different ripening stages and scanned by a fiber optical probe immediately after harvesting and after a storage of 3 d (2 d at 4 °C and 1 d at 18 °C); the flesh firmness (FF), the soluble solids content (SSC), the acidity (A), and the titratable acidity (malic and citric acids) were then measured by destructive methods. Soft independent modeling of class analogy (SIMCA) analysis was used to classify spectra according to the ripening stage and the storage: partial least squares regression (PLS) models to predict FF, SSC, A, and the titratable acidity were also set-up for both just harvested and stored apricots. Spectral pretreatments and wavenumber selections were conducted on the basis of explorative principal component analysis (PCA). Apricot spectra were correctly classified in the right class with a mean classification rate of 87% (range: 80% to 100%). Test set validations of PLS models showed R² values up to 0.620, 0.863, 0.842, and 0.369 for FF, SSC, A, and the titratable acidity, respectively. The best models were obtained for the SSC and A and are suitable for rough screening; a lower power prediction emerged for the other maturity indices and the relative predictive models are not recommended. Practical Application : The results of the study could be used as a tool for the assessment of the ripening stage during the harvest and the quality during the postharvest storage of apricot fruits.     

Droplet breakage and coalescence in liquid–liquid dispersions: Comparison of different kernels with EQMOM and QMOM

Droplet coalescence and breakage in turbulent liquid–liquid dispersions is simulated by using computational fluid dynamics (CFD) and population balance modeling. The multifractal (MF) formalism that takes into account internal intermittency was here used for the first time to describe breakage and coalescence in a surfactant‐free dispersion. The log‐normal Extended Quadrature Method of Moments (EQMOM) was for the first time coupled with a CFD multiphase solver. To assess the accuracy of the model, predictions are compared with experiments and other models (i.e., Coulalogou and Tavlarides kernels and Quadrature Method of Moments [QMOM]). EQMOM and QMOM resulted in similar predictions, but EQMOM provides a continuous reconstruction of the droplet‐size distribution. Transient predictions obtained with the MF kernels result in a better agreement with the experiments. © 2016 American Institute of Chemical Engineers AIChE J, 63: 2293–2311, 2017     

Nanoindentation and scratch behaviour of Ni–P electroless coatings

ABSTRACT

In the present paper, the mechanical properties and the scratch failure mechanisms of Ni–P electroless coatings are described. The material microstructure was studied in as-deposited and annealed conditions through SEM and EDS analyses. Nanoindentation measurements on the coatings showed a remarkable hardening due to the crystallization and precipitation behaviour produced by annealing. The scratch tests, conducted by increasing the load during scratch, revealed the coating failure mechanisms in a broad range of applied stresses up to delamination.