Guidelines and recommendations for indoor use of fuel cells and hydrogen systems

Hydrogen energy applications often require that systems are used indoors (e.g., industrial trucks for materials handling in a warehouse facility, fuel cells located in a room, or hydrogen stored and distributed from a gas cabinet). It may also be necessary or desirable to locate some hydrogen system components/equipment inside indoor or outdoor enclosures for security or safety reasons, to isolate them from the end-user and the public, or from weather conditions.Using of hydrogen in confined environments requires detailed assessments of hazards and associated risks, including potential risk prevention and mitigation features. The release of hydrogen can potentially lead to the accumulation of hydrogen and the formation of a flammable hydrogen-air mixture, or can result in jet-fires. Within Hyindoor European Project, carried out for the EU Fuel Cells and Hydrogen Joint Undertaking safety design guidelines and engineering tools have been developed to prevent and mitigate hazardous consequences of hydrogen release in confined environments. Three main areas are considered: Hydrogen release conditions and accumulation, vented deflagrations, jet fires and including under-ventilated flame regimes (e.g., extinguishment or oscillating flames and steady burns). Potential RCS recommendations are also identified.     

Any publicity is better than none: newspaper coverage increases citations, in the UK more than in Italy

A citation advantage for research covered by the mass media is a plausible, but poorly studied phenomenon. Two previous studies, both conducted in the United States, found a positive correlation between media reporting and citations. Only one of these studies was able to conclude that the correlation was caused by a real “publicity effect” rather than by the media highlighting papers that are intrinsically destined to have greater scientific impact (called the ‘earmark’ hypothesis). This study assessed the relative importance of the publicity effect outside the US, by comparing studies published in 2008 and 2009 in the Proceedings of the National Academy of Sciences that had been featured in newspapers in Italy and the United Kingdom. Newspapers in the two countries covered a similar range of topics, and tended to over-represent local (national) research. Compared to studies not appearing in any of the newspapers considered, those featured in British newspapers had around 63 % more citations, whilst in Italian newspapers 16 %. The proportion of citations from Italian authors, however, was significantly increased by newspapers, particularly by those in Italian. The equivalent effect on citations from the UK was smaller and only marginally significant. Studies accompanied by a press release did not receive, overall, significantly more citations. In sum, results suggest that the publicity effect is strongest for English-speaking media, whilst non-English reporting has mostly a local influence. These effects might represent a confounding factor in citation-based research assessment and might contribute to the many biases known to affect the scientific literature.     

Photonic Microhand with Autonomous Action

Grabbing and holding objects at the microscale is a complex function, even for microscopic living animals. Inspired by the hominid‐type hand, a microscopic equivalent able to catch microelements is engineered. This microhand is light sensitive and can be either remotely controlled by optical illumination or can act autonomously and grab small particles on the basis of their optical properties. Since the energy is delivered optically, without the need for wires or batteries, the artificial hand can be shrunk down to the micrometer scale. Soft material is used, in particular, a custom‐made liquid‐crystal network that is patterned by a photolithographic technique. The elastic reshaping properties of this material allow finger movement, using environmental light as the only energy source. The hand can be either controlled externally (via the light field), or else the conditions in which it autonomously grabs a particle in its vicinity can be created. This microrobot has the unique feature that it can distinguish between particles of different colors and gray levels. The realization of this autonomous hand constitutes a crucial element in the development of microscopic creatures that can perform tasks without human intervention and self‐organized automation at the micrometer scale.     

Hybridizing adaptive large neighborhood search with kernel search: a new solution approach for the nurse routing problem with incompatible services and minimum demand

The average age of the population has grown steadily in recent decades along with the number of people suffering from chronic diseases and asking for treatments. Hospital care is expensive and often unsafe, especially for older individuals. This is particularly true during pandemics as the recent SARS-CoV-2. Hospitalization at home has become a valuable alternative to face efficiently a huge increase in treatment requests while guaranteeing a high quality of service and lower risk to fragile patients. This new model of care requires the redefinition of health services organization and the optimization of scarce resources (e.g., available nurses). In this paper, we study a Nurse Routing Problem that tries to find a good balance between hospital costs reduction and the well-being of patients, also considering realistic operational restrictions like maximum working times for the nurses and possible incompatibilities between services jointly provided to the same patient. We first propose a Mixed Integer Linear Programming formulation for the problem and use some valid inequalities to strengthen it. A simple branch-and-cut algorithm is proposed and validated to derive ground benchmarks. In addition, to efficiently solve the problem, we develop an Adaptive Large Neighborhood Search hybridized with a Kernel Search and validate its performance over a large set of different realistic working scenarios. Computational tests show how our matheuristic approach manages to find good solutions in a reasonable amount of time even in the most difficult settings. Finally, some interesting managerial insights are discussed through an economic analysis of the operating context.     

Potential to retrofit existing small-scale gasifiers through steam gasification of biomass residues for hydrogen and biofuels production

This work investigates the opportunity of retrofitting existing small-scale gasifiers shifting from combined heat and power (CHP) to hydrogen and biofuels production, using steam and biomass residues (woodchips, vineyard pruning and bark). The experiments were carried out in a batch reactor at 700 °C and 800 °C and at different steam flow (SF) rates (0.04 g/min and 0.20 g/min). The composition of the producer gas is in the range of 46–70 % H₂, 9–29 % CO, 12–27 % CO₂, and 2–6 % CH₄. A producer gas specific production factor of approx. 10 NL_pg/g_char can be achieved when the lower SFs are used, which allows to provide 80 % of the hydrogen concentration required for biomethanation and MeOH synthesis. As for FT synthesis, an optimal H₂/CO ratio of approx. 2 can be achieved. The results of this work provide further evidence towards the feasibility of hydrogen and biofuels generation from residual biomass through steam gasification.     

Microencapsulation of cashew apple (Anacardium occidentale,L.) juice using a new chitosan–commercial bovine whey protein isolate system in spray drying

The aim of this work was to obtain a new stable food product from cashew apple juice encapsulated by spray-drying technique using chitosan–whey protein isolate systems. The materials were evaluated according to their physicochemical stability during storage at different conditions and characterized with respect to their particle size distribution and structure. Encapsulated commercial and natural juices showed homogenous and unimodal particle size distribution with diameters ranging from 0.2 to 5.0 μm and from 0.2 to 40.0 μm, respectively. Both juices demonstrated higher physicochemical stability for vitamin C and color measurements than their respective non-encapsulated juices. X-ray diffractograms evidenced that the powder juices after the 140th day of storage were still in amorphous state. These results indicate that the new product was effective in protecting sensitive compounds present in the food matrix and it was also able to remain stable throughout the study period.     

Archaeological Arsenical Bronzes and Equilibrium in the As-Cu System

Metallurgical and Materials Transactions B - Understanding the effects of impurities, segregation, undercooling, and solidification velocity is necessary to reconstruct prehistoric As-Cu alloy...     

Optimization by record dynamics

Large dynamical changes in thermalizing glassy systems are triggered by trajectories crossing record sized barriers, a behavior revealing the presence of a hierarchical structure in configuration space. The observation is here turned into a novel local search optimization algorithm dubbed record dynamics optimization, or RDO. RDO uses the Metropolis rule to accept or reject candidate solutions depending on the value of a parameter akin to the temperature and minimizes the cost function of the problem at hand through cycles where its ‘temperature’ is raised and subsequently decreased in order to expediently generate record high (and low) values of the cost function. Below, RDO is introduced and then tested by searching for the ground state of the Edwards–Anderson spin-glass model, in two and three spatial dimensions. A popular and highly efficient optimization algorithm, parallel tempering (PT), is applied to the same problem as a benchmark. RDO and PT turn out to produce solutions of similar quality for similar numerical effort, but RDO is simpler to program and additionally yields geometrical information on the system’s configuration space which is of interest in many applications. In particular, the effectiveness of RDO strongly indicates the presence of the above mentioned hierarchically organized configuration space, with metastable regions indexed by the cost (or energy) of the transition states connecting them.     

Kinetics of Pressure Cycling Extraction of Solute from Leaves of Mate (Ilex paraguariensis) Dispersed in Water

A set of seven extraction experiments was performed to investigate the influence of pressure cycles on the kinetics of solute removal from leaves of mate dispersed in water. The mass ratio of liquid to dry solid (40), the temperature (32°C), and time of extraction (3600?s) were not varied. Five extraction runs were under cyclic pressurization (1?cycle?=?300?s at 91.4?kPa?+?300?s at 182.8?kPa) and stirring speeds (S) of 0, 150, 500, 1500, and 2000?rpm, while the two other ones were at constant pressure (182.8?kPa) and S close to 1500 and 2000?rpm. Based on seven pairs of parameters of a reliable second-order kinetic model (R²?≥?0.967), cyclic pressurization had no effect on equilibrium and kinetics of extraction (p?>?0.05) when the role of convection on solute transfer was negligible (S?≥?500?rpm). In the stirring speed range from 500 to 2000?rpm, the operation was controlled by diffusion (Bi >?1.7?×?10³), so a transient two-dimensional diffusion model was able to describe correctly the changes of solute concentration with time. Below 500?rpm, solute transfer was governed by a combination of diffusion and convection with the external resistance to mass transfer as a function of S (16?≤?Bi?≤?28).