Damage generation and location in n- and p-MOSFETs biased in theSubstrate-Enhanced Gate Current regime

This paper analyzes MOSFET degradation in the regime of hot carrier injection enhanced by substrate bias Substrate-Enhanced Gate Current (SEGC). The results are compared with the damage generated during conventional Channel Hot Carrier (CHC) stress experiments. The investigation was carried out on state of the art n⁺-poly n-MOSFETs and p⁺-poly p-MOSFETs, and it includes both a detailed characterization of standard electrical parameters (i.e., threshold voltage, drain current and linear transconductance) and a spatial profiling of stress-induced interface states. Our results reveal that the application of a substrate bias enhances degradation on both n-MOS and p-MOS devices and spreads toward the center of the channel the spatial profile of the damage. For a given gate current and oxide field in the injection region, the total amount of the generated damage is quite similar in both cases, but in the SEGC regime, the spatial distribution of generated traps is more distributed along the channel     

Presentation‐Oriented Key‐Frames Coding Based on Fractals

This paper focuses on the problem of key‐frames coding and proposes a new promising approach based on the use of fractals. The summary, made of a set of key‐frames selected from a full‐length video sequence, is coded by using a 3D fractal scheme. This allows the video presentation tool to expand the video sequence in a “natural” way by using the property of the fractals to reproduce the signal at several resolutions. This feature represents an important novelty of this work with respect to the alternative approaches, which mainly focus on the compression ratio without taking into account the presentation aspect of the video summary. In devising the coding scheme, we have taken care of the computational complexity inherent in fractal coding. Accordingly, the key‐frames are first wavelet transformed, and the fractal coding is then applied to each subband to reduce the search range. Experimental results show the effectiveness of the proposed approach.     

Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy

The thermoacoustic effect of isolated single‐wall carbon nanotubes aligned between electrodes is experimentally observed for the first time by imaging the emitted acoustic wave using an atomic force microscopy‐based technique specifically developed for the task. The capability of such a technique for single‐point thermoacoustic measurements is first verified on carbon nanotubes layers with two electrodes for injecting alternate electric current. The technique is then demonstrated to allow the acquisition, simultaneously with the topography, of images reflecting the pressure of the acoustic wave at fixed distance from the sample. Such a capability is used to collect images reflecting the amplitude of acoustic waves generated by isolated nanotubes and nanotube bundles by the thermoacoustic effect.     

Ionic‐Liquid Gating of InAs Nanowire‐Based Field‐Effect Transistors

Here, the operation of a field‐effect transistor based on a single InAs nanowire gated by an ionic liquid is reported. Liquid gating yields very efficient carrier modulation with a transconductance value 30 times larger than standard back gating with the SiO₂/Si₊₊ substrate. Thanks to this wide modulation, the controlled evolution from semiconductor to metallic‐like behavior in the nanowire is shown. This work provides the first systematic study of ionic‐liquid gating in electronic devices based on individual III–V semiconductor nanowires: this architecture opens the way to a wide range of fundamental and applied studies from the phase transitions to bioelectronics.     

Highly Stable Colloidal “Giant” Quantum Dots Sensitized Solar Cells

Colloidal quantum dots (QDs) are widely studied due to their promising optoelectronic properties. This study explores the application of specially designed and synthesized “giant” core/shell CdSe/(CdS)_x QDs with variable CdS shell thickness, while keeping the core size at 1.65 nm, as a highly efficient and stable light harvester for QD sensitized solar cells (QDSCs). The comparative study demonstrates that the photovoltaic performance of QDSCs can be significantly enhanced by optimizing the CdS shell thickness. The highest photoconversion efficiency (PCE) of 3.01% is obtained at optimum CdS shell thickness ≈1.96 nm. To further improve the PCE and fully highlight the effect of core/shell QDs interface engineering, a CdSe_x S_1?x interfacial alloyed layer is introduced between CdSe core and CdS shell. The resulting alloyed CdSe/(CdSe_x S_1?x )₅/(CdS)₁ core/shell QD‐based QDSCs yield a maximum PCE of 6.86%, thanks to favorable stepwise electronic band alignment and improved electron transfer rate with the incorporation of CdSe_x S_1?x interfacial layer with respect to CdSe/(CdS)₆ core/shell. In addition, QDSCs based on “giant” core/CdS‐shell or alloyed core/shell QDs exhibit excellent long‐term stability with respect to bare CdSe‐based QDSCs. The giant core/shell QDs interface engineering methodology offers a new path to improve PCE and the long‐term stability of liquid junction QDSCs.     

Analysis and comparison of scheduling techniques for a BWA OFDMA mobile system

In the last few years the wireless metropolitan area networks (WMANs) have increased their popularity and attracted the interest of important research groups all over the world; as a consequence, several standards have been proposed. Among them, the IEEE 802.16 (WiMAX) is one of the most promising standard to carry out a full‐service broadband wireless network in an urban and suburban area. This standard provides high data rate within a wide coverage area with low implementation costs, possibility of multi‐traffic communications, and different network topologies. This paper deals with the analysis and performance comparison of different scheduling techniques for WiMAX networks for allowing quality of service (QoS) differentiation when different types of applications have to be supported and achieving a fair distribution of resource among users. In particular, the focus here is on the resource allocation problem for the case of mobile stations (MSs) active in an urban environment. The proposed scheduling algorithms exploit the orthogonal frequency division multiple access (OFDMA) scheme with adaptive modulation techniques in order to achieve a better network behavior. The performance of the proposed approaches will be derived here by means of theoretical analysis and computer simulations. Copyright © 2009 John Wiley & Sons, Ltd.     

Molecular Mechanisms and Physiological Changes behind Benign Tracheal and Subglottic Stenosis in Adults

Laryngotracheal stenosis (LTS) is a complex and heterogeneous disease whose pathogenesis remains unclear. LTS is considered to be the result of aberrant wound-healing process that leads to fibrotic scarring, originating from different aetiology. Although iatrogenic aetiology is the main cause of subglottic or tracheal stenosis, also autoimmune and infectious diseases may be involved in causing LTS. Furthermore, fibrotic obstruction in the anatomic region under the glottis can also be diagnosed without apparent aetiology after a comprehensive workup; in this case, the pathological process is called idiopathic subglottic stenosis (iSGS). So far, the laryngotracheal scar resulting from airway injury due to different diseases was considered as inert tissue requiring surgical removal to restore airway patency. However, this assumption has recently been revised by regarding the tracheal scarring process as a fibroinflammatory event due to immunological alteration, similar to other fibrotic diseases. Recent acquisitions suggest that different factors, such as growth factors, cytokines, altered fibroblast function and genetic susceptibility, can all interact in a complex way leading to aberrant and fibrotic wound healing after an insult that acts as a trigger. However, also physiological derangement due to LTS could play a role in promoting dysregulated response to laryngo-tracheal mucosal injury, through biomechanical stress and mechanotransduction activation. The aim of this narrative review is to present the state-of-the-art knowledge regarding molecular mechanisms, as well as mechanical and physio-pathological features behind LTS.     

Biological Effects of Cyclin-Dependent Kinase Inhibitors Ribociclib,Palbociclib and Abemaciclib on Breast Cancer Bone Microenvironment

The CDK4/6 inhibitors (CDKi) palbociclib, ribociclib, and abemaciclib are currently approved in combination with anti-estrogen therapy for the treatment of advanced and/or metastatic hormone receptor-positive/HER2-neu-negative breast cancer patients. Given the high incidence of bone metastases in this population, we investigated and compared the potential effects of palbociclib, ribociclib, and abemaciclib on the breast cancer bone microenvironment. Primary osteoclasts (OCs) and osteoblasts (OBs) were obtained from human monocyte and mesenchymal stem cells, respectively. OC function was evaluated by tartrate-resistant acid phosphatase assay and real-time PCR; OB activity was assessed by an alizarin red assay. OB/breast cancer co-culture models were generated via the seeding of MCF-7 cells on a layer of OBs, and tumor cell proliferation was analyzed using flow cytometry. Here, we showed that ribociclib, palbociclib, and abemaciclib exerted similar inhibitory effects on the OC differentiation and expression of bone resorption markers without affecting OC viability. On the other hand, the three CDKi did not affect the ability of OB to produce bone matrix, even if the higher doses of palbociclib and abemaciclib reduced the OB viability. In OB/MCF-7 co-culture models, palbociclib demonstrated a lower anti-tumor effect than ribociclib and abemaciclib. Overall, our results revealed the direct effects of CDKi on the tumor bone microenvironment, highlighting differences potentially relevant for clinical practice.     

Thin-film solar cells on commercial ceramic tiles

Amorphous silicon solar cells were deposited on porcelain stoneware tiles in order to develop a fully integrated PV building element. In a previous work we demonstrated the feasibility of adopting porcelain stoneware tiles as thin-film solar cell substrates and we fabricated solar cells on “industrial-level” ceramic substrates showing more than 4% efficiency. In this study we focus our attention on larger area devices deposited on tiles. As the active area increases additional problems arise from the surface of the substrate. In particular we find that short-circuit paths originate from the unfavorable properties of the substrate tiles (roughness, porosity, etc.) having dramatic consequences on the performance of larger area devices. With the assumption that spot-like regions, in which the back layer and the front layer are in electrical contact (local short-circuits), are present all over the device, we propose a new device structure to overcome the substrate drawbacks. A new contacts arrangement was designed in order to minimize the shunting effect of short-circuit paths. As a result an initial efficiency of 2.5% has been obtained using the new device structure for devices deposited on a PV mini-module tile.