Nanoindentation and scratch behaviour of Ni–P electroless coatings

ABSTRACT

In the present paper, the mechanical properties and the scratch failure mechanisms of Ni–P electroless coatings are described. The material microstructure was studied in as-deposited and annealed conditions through SEM and EDS analyses. Nanoindentation measurements on the coatings showed a remarkable hardening due to the crystallization and precipitation behaviour produced by annealing. The scratch tests, conducted by increasing the load during scratch, revealed the coating failure mechanisms in a broad range of applied stresses up to delamination.     

Issues in the characterization of power quality instruments

This paper analyzes some issues related to the metrological characterization of instruments for power quality monitoring, in order to move a step toward the definition of a full performance verification protocol. This protocol should include not only the test situations reported in corresponding standards, but also an array of different voltage and current fluctuations – linked to common power quality issues – that may be encountered in actual power systems. This performance analysis is particularly interesting because it can be found that different power quality instruments, fully meeting characteristics prescribed in standard, still may significantly disagree in some actual measurements. This is due for the existence of unresolved technical and theoretical issues related to the metrological characterization through the classical approaches of these instruments. The aim of the discussion carried out in this paper is also the specification of requirements of a test system devoted to calibration and verification of a power quality monitor, such as it is done in type testing. After a preliminary discussion about technical and theoretical issues related to the performance analysis of these instruments, a proposal of test protocol definition, with reference to some power quality phenomena and based on the design of experiment, is presented.     

Comparison between ozonation and the OSA process: analysis of excess sludge reduction and biomass activity in two different pilot plants

The excess biomass produced during biological treatment of municipal wastewater represents a major issue worldwide, as its disposal implies environmental, economic and social impacts. Therefore, there has been a growing interest in developing technologies to reduce sludge production. The main proposed strategies can be categorized according to the place inside the wastewater treatment plant (WWTP) where the reduction takes place. In particular, sludge minimization can be achieved in the wastewater line as well as in the sludge line. This paper presents the results of two pilot scale systems, to evaluate their feasibility for sludge reduction and to understand their effect on biomass activity: (1) a pilot plant with an ozone contactor in the return activated sludge (RAS) stream for the exposition of sludge to a low ozone dosage; and (2) an oxic-settling-anaerobic (OSA) process with high retention time in the anaerobic sludge holding tank have been studied. The results showed that both technologies enabled significant excess sludge reduction but produced a slight decrease of biomass respiratory activity.     

Molecular Mechanisms and Physiological Changes behind Benign Tracheal and Subglottic Stenosis in Adults

Laryngotracheal stenosis (LTS) is a complex and heterogeneous disease whose pathogenesis remains unclear. LTS is considered to be the result of aberrant wound-healing process that leads to fibrotic scarring, originating from different aetiology. Although iatrogenic aetiology is the main cause of subglottic or tracheal stenosis, also autoimmune and infectious diseases may be involved in causing LTS. Furthermore, fibrotic obstruction in the anatomic region under the glottis can also be diagnosed without apparent aetiology after a comprehensive workup; in this case, the pathological process is called idiopathic subglottic stenosis (iSGS). So far, the laryngotracheal scar resulting from airway injury due to different diseases was considered as inert tissue requiring surgical removal to restore airway patency. However, this assumption has recently been revised by regarding the tracheal scarring process as a fibroinflammatory event due to immunological alteration, similar to other fibrotic diseases. Recent acquisitions suggest that different factors, such as growth factors, cytokines, altered fibroblast function and genetic susceptibility, can all interact in a complex way leading to aberrant and fibrotic wound healing after an insult that acts as a trigger. However, also physiological derangement due to LTS could play a role in promoting dysregulated response to laryngo-tracheal mucosal injury, through biomechanical stress and mechanotransduction activation. The aim of this narrative review is to present the state-of-the-art knowledge regarding molecular mechanisms, as well as mechanical and physio-pathological features behind LTS.     

Biological Effects of Cyclin-Dependent Kinase Inhibitors Ribociclib,Palbociclib and Abemaciclib on Breast Cancer Bone Microenvironment

The CDK4/6 inhibitors (CDKi) palbociclib, ribociclib, and abemaciclib are currently approved in combination with anti-estrogen therapy for the treatment of advanced and/or metastatic hormone receptor-positive/HER2-neu-negative breast cancer patients. Given the high incidence of bone metastases in this population, we investigated and compared the potential effects of palbociclib, ribociclib, and abemaciclib on the breast cancer bone microenvironment. Primary osteoclasts (OCs) and osteoblasts (OBs) were obtained from human monocyte and mesenchymal stem cells, respectively. OC function was evaluated by tartrate-resistant acid phosphatase assay and real-time PCR; OB activity was assessed by an alizarin red assay. OB/breast cancer co-culture models were generated via the seeding of MCF-7 cells on a layer of OBs, and tumor cell proliferation was analyzed using flow cytometry. Here, we showed that ribociclib, palbociclib, and abemaciclib exerted similar inhibitory effects on the OC differentiation and expression of bone resorption markers without affecting OC viability. On the other hand, the three CDKi did not affect the ability of OB to produce bone matrix, even if the higher doses of palbociclib and abemaciclib reduced the OB viability. In OB/MCF-7 co-culture models, palbociclib demonstrated a lower anti-tumor effect than ribociclib and abemaciclib. Overall, our results revealed the direct effects of CDKi on the tumor bone microenvironment, highlighting differences potentially relevant for clinical practice.     

Ficolin-2 Plasma Level Assesses Liver Fibrosis in Non-Alcoholic Fatty Liver Disease

Fibrosis is the strongest predictor for disease-specific mortality in non-alcoholic fatty liver diseases (NAFLD), but the need for liver biopsy limits its diagnosis. We assessed the performance of plasma ficolin-2 (FCN-2) as a biomarker of fibrosis identified by an in silico discovery strategy. Two hundred and thirty-five morbidly obese (MO) subjects with biopsy-proven NAFLD stratified by fibrosis stage (F0, n = 44; F1, n = 134; F2, n = 46; F3/F4, n = 11) and 40 cirrhotic patients were enrolled. The cohort was subdivided into discovery (n = 76) and validation groups (n = 159). The plasma level of FCN-2 and other candidate markers was determined. FCN-2 was inversely correlated with the stage of liver fibrosis (ρ = −0.49, p < 0.001) independently of steatosis (p = 0.90), inflammation (p = 0.57), and ballooning (p = 0.59). In the global cohort, FCN-2 level decreased significantly in a stepwise fashion from F0/F1 (median 4753 ng/mL) to F2–F3–F4 (2760 ng/mL) and in cirrhotic subjects (1418 ng/mL). The diagnostic performance of FCN-2 in detecting F ≥ 2 was higher than other indexes (APRI, FIB-4) (AUROC 0.82, 0.68, and 0.6, respectively). The accuracy improved when combined with APRI score and HDL values (FCNscore, AUROC 0.85). Overall, the FCN-2 plasma level can accurately discriminate liver fibrosis status (minimal vs. moderate/advanced) significantly improving the fibrosis diagnostic algorithms.     

Novel link adaptation for TETRA cellular systems

One of the main challenges for future wireless systems is to enhance the effective data throughput by exploiting the allocated bandwidth as much as possible. Among several approaches at different layers, one of the most important is constituted by the so‐called link adaptation (LA) techniques. They are characterized by the adaptation of a set of transmission parameters to the channel state in order to improve performance. In this context, this paper is focused on the analysis of a particular class of LA techniques called adaptive modulation and coding, where the modulation and coding rate of transmission can vary according to the channel behavior. In particular, a novel LA algorithm, namely the timed window (TW) method, suitable for time‐division Duplex systems is proposed here. The performance of the TW algorithm is evaluated by taking actual user mobility conditions, communication channel behavior, as well as the physical layer effects into account. Finally, it is important to stress that, even if the wireless bearer considered in this study is TETRA (TErrestrial Trunked RAdio), the approach is quite general and it can be of interest for other wireless networks and can be optimized for different channel models (e.g. TU50, HT200, etc.). Copyright © 2008 John Wiley & Sons, Ltd.     

Theoretical study and performance evaluation of hydrogen production by 200 W solid oxide electrolyzer stack

High temperature steam electrolyzers, taking advantage of high temperature heat, can produce more hydrogen by using less electrical energy than low temperature electrolyzers. This paper presents an experimental study on hydrogen production by using a 200 W solid oxide stack working in reverse mode. A thermodynamic study of the process was performed by measuring the heat and mass balance of stack at different operating conditions. Different definitions of efficiency were used to highlight the limit and potential of the process. The I–V curve, the flow rate measurements and the GC analysis on outlet flows were used to calculate the hydrogen and oxygen productions. In addition, the influence of steam dilution, water utilization and operating temperature on conversion efficiency and stack's thermal balance was evaluated. With this aim, the tests were performed at three operating temperature (700 °C, 750 °C and 800 °C) over a range of steam inlet concentration from 50% to 90% and water utilization up to 70%. The hydrogen and oxygen flows produced by electrolysis, at different loads, were directly measured after water condensation: net flows up to 2.4 ml/(min cm²) of hydrogen and 1.2 ml/(min cm²) of oxygen were measured and compared to the theoretical ones, showing a good agreement.     

Combined Effects of Parallel and Series Detention Basins for Flood Peak Reduction

A simple analytical method is proposed that allows a preliminary evaluation of the overall efficiency of a detention basin system for flood risk reduction in a specific target section. Solutions are provided both for parallel and series systems, under some simplifying assumptions concerning the linearity of detention basin, river network and watershed responses. Further, for the series configuration a regressive model is proposed for the computation of the overall efficiency, because of the complexity of analytical solution. A case study is also presented, where the overall efficiency of a system of nine detention basins is computed by means of both the analytical and the regressive model. Results are discussed to assess the different influence of detention basins in parallel or in a series system.