Comparison of the univariate and multivariate methods in the optimization of experimental conditions for determining Cu, Pb, Ni and Cd in biodiesel by GFAAS

Experimental design was used as a tool to define the optimum pyrolysis and atomization temperatures for four analytes (Cu, Pb, Ni and Cd) in biodiesel samples. Two chemical modifiers (Pd + Mg and W) and two distinct sample preparation procedures (microemulsion and wet digestion in a focused microwave system) were also investigated. The pyrolysis and atomization temperatures were optimized using 2⁴ factorial design for Cu, Pb, Ni and Cd, with 16 assays carried out for each analyte. The results for Cu and Pb indicated that variables of sample preparation for digestion by focused microwave was the most important one for both analytes. The pyrolysis and atomization temperatures applied were 1000 °C and 2200 °C for Cu and 500 °C and 2000 °C for Pb. None of the variables analyzed here were important for Ni, and the pyrolysis and atomization temperatures chosen for this element were 800 °C and 2300 °C. A different factorial design was used for Cd. The variables of medium and modifier were not important for this element, and the lowest temperatures, Tp-500 °C and Ta-1400 °C, were chosen based on this second design. The importance of factorial design in the simultaneous optimization of several variables studied by GFAAS was confirmed, for it involves fewer experiments and hence, lower costs, greater speed and higher efficiency.     

Reduction and catalytic behaviour of heterobimetallic copper–lanthanide oxides

The reduction of the heterobimetallic copper–lanthanide oxides 2CuO·CeO₂ and 3CuO·Ln₂CuO₄ (Ln = La, Pr, Nd) was studied by H₂-TG/DTA and H₂-TPR. All systems exhibit two main reduction steps accompanied by mass losses in the temperature range 20–1000 °C. The first step was attributed to CuO reduction, whereas the second step is due either to copper reduction in the Ln₂CuO₄ phase with the concomitant formation of Ln₂O₃ or to the surface reduction of CeO₂. The products were characterized by XRD, SEM, EDX, and BET techniques and are better described as supported copper type materials. They were active for the mesityl oxide (4-methyl-2-penten-2-one) gas phase hydrogenation.     

Modeling homophily over time with an actor-partner interdependence model.

Selection and socialization have been implicated in friendship homophily, but the relative contributions of each are difficult to measure simultaneously because of the nonindependent nature of the data. To address this problem, the authors applied a multiple-groups longitudinal actor-partner interdependence model (D. A. Kashy & D. A. Kenny, 2000) for distinguishable dyads to 3 consecutive years of intoxication frequency data from a large community-based sample of Swedish youth. Participants, ranging from 12 to 18 years old (M = 14.35, SD = 1.56) at the start of the study, included 902 adolescents (426 girls and 476 boys) with at least one reciprocated friend during at least one time point and 212 adolescents (84 girls and 128 boys) without reciprocated friends at any time. Similarity estimates indicated strong effects for selection and socialization in friends' intoxication frequency. Over time, younger members of these dyads had less stable patterns of intoxication than older members, largely because younger partners changed their drinking behavior to resemble that of older partners. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Properties of mixed chlorophyll a-glycolipid monolayers

Surface pressure, ellipsometric and surface potential-area isotherms have been measured to investigate the properties of chlorophyll a-digalactosyldiacyglycerol (Chl a-DGDG) and Chl a-sulfoquinovosyldiacylglycerol (SQDG) monolayers at the nitrogen-water interface. The surface pressure-area isotherms of Chla-DGDG exhibit a pronounced negative deviation with respect to ideality, whereas ellipsometric and surface potential isotherms of the mixed monolayers fall between those of the pure components. Hydrophilic interactions have been ruled out on the basis of the additivity law followed by the surface dipole moment of the mixed monolayers. The observed deviation exhibited by the π-A isotherms is interpreted in terms of an intermolecular cavity effect.     

Impacts on Children of a Policy to Promote Employment and Reduce Poverty for Low-Income Parents: New Hope After 5 Years.

The impacts of New Hope, a program to increase parent employment and reduce poverty, were measured 5 years after parents were randomly assigned to program or control groups. New Hope had positive effects on children's school achievement, motivation, and social behavior, primarily for boys, across the age range 6-16. In comparison to impacts measured 2 years after program onset, effects on achievement were robust, but effects on social behavior were reduced. The program produced improvements in family income and use of organized child care and activity settings, suggesting possible pathways by which the New Hope package of policies influenced children's behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

BiNem® manufacturing process for mass production

Abstract— As the need for high‐resolution ultra‐low‐power bistable displays grows, it is important to rapidly implement the mass‐production manufacturing of BiNem® LCDs. The cost‐effective approach for BiNem® manufacturing is based on using STN manufacturing process technologies since BiNem® and STN displays have a similar internal structure. The key differences between BiNem® and STN displays from a manufacturing point of view will be discussed. We show that industrial STN manufacturing equipment can be used to produce BiNem® LCDs at competitive costs. Reflective e‐book display modules with VGA resolution are produced in the pilot‐production series.     

Enhanced analyte detection using in-source fragmentation of field asymmetric waveform ion mobility spectrometry-selected ions in combination with time-of-flight mass spectrometry

Miniaturized ultra high field asymmetric waveform ion mobility spectrometry (FAIMS) is used for the selective transmission of differential mobility-selected ions prior to in-source collision-induced dissociation (CID) and time-of-flight mass spectrometry (TOFMS) analysis. The FAIMS-in-source collision induced dissociation-TOFMS (FISCID-MS) method requires only minor modification of the ion source region of the mass spectrometer and is shown to significantly enhance analyte detection in complex mixtures. Improved mass measurement accuracy and simplified product ion mass spectra were observed following FAIMS preselection and subsequent in-source CID of ions derived from pharmaceutical excipients, sufficiently close in m/z (17.7 ppm mass difference) that they could not be resolved by TOFMS alone. The FISCID-MS approach is also demonstrated for the qualitative and quantitative analysis of mixtures of peptides with FAIMS used to filter out unrelated precursor ions thereby simplifying the resulting product ion mass spectra. Liquid chromatography combined with FISCID-MS was applied to the analysis of coeluting model peptides and tryptic peptides derived from human plasma proteins, allowing precursor ion selection and CID to yield product ion data suitable for peptide identification via database searching. The potential of FISCID-MS for the quantitative determination of a model peptide spiked into human plasma in the range of 0.45-9.0 μg/mL is demonstrated, showing good reproducibility (%RSD < 14.6%) and linearity (R(2) > 0.99).     

Nanomaterials for X-ray imaging: gold nanoparticle enhancement of X-ray scatter imaging of hepatocellular carcinoma

We present the development of a new imaging technique for the early diagnosis of hepatocellular carcinoma that utilizes surface-modified gold nanoparticles in combination with X-ray imaging. Tissues labeled with these electron-dense particles show enhanced X-ray scattering over normal tissues, distinguishing cells containing gold nanoparticles from cells without gold in X-ray scatter images. Our results suggest that this novel approach could enable the in vivo detection of tumors as small as a few millimeters in size.