Shape measurement of long microbores applying photon counting method

New technology, especially in the field of microelectronics and mechatronics, created the need for making, positioning and inspection techniques of long microbore-holes and gaps (defined by length/width to diameter ratio l/d > 10 for d < 200 μm). The technological aspect is, in principle, subdued but the metrological one is still unsolved.In Zosel et al. [Zosel J, Guth U, Thies A, Reents B. Flow measurements in micro holes with electrochemical and optical methods. Electrochim Acta 2003;48:3299–305] the properties (power loss and phase distortion) of focused laser microbeam penetrating extremely long through microbores is described; it was proved that the measurement information is distorted depending on the microbore geometry. The samples were prepared of glass–resin laminate with microbore diameter ranging from 35 to 200 μm.In present research an adjustable 100 μm microbore is used as a master. It is formed of mutually accurately adjusted 20 metal plates 100 μm thick set of coaxially in pile. Precise positioning of each plate enables creating free-shaped microbore.The photon batching device emitting 2.5 million photons per second is used as a generator of incident photon beam. The measured transmission efficiency is understood as a relation between outgoing and incoming light energy. The outgoing energy, for particular microbore, was determined by scanning linearly and angularly the bore with photon beam and integrating the results. Experiments were performed in dark room with background 2/5 photons per second (including dark current of photomultiplier).These changes describe the relationship between the shape of the microbore and the transmission energy and can be considered as a measure of microbore cylindricity deviation.     

The effect of beta-carotene and vitamins A, D3 and E on some reproductive parameters in cows

Five groups of winter-housed cows (n = 10 per group) that calved in the winter were used to assess the effect of beta-carotene supplementation on postpartum reproductive performance. Near parturition and immediately after calving the beta-carotene concentrations of the blood plasma were decreased and no differences could be found between the control and the supplemented groups. The results obtained at postpartum day 60 suggest that supplementation of the daily winter ration with 300 mg of synthetic beta-carotene with or without vitamins A, D3 and E exerts the most favourable effect on reproduction, as judged not only from B-carotene and vitamin A contents of the blood plasma, colostrum and milk but also from the improved fertility indices. The number of inseminations per cow was reduced and the conception rate was significantly higher in cows supplied additionally with 300 mg of synthetic beta-carotene with or without vitamins A, D3 and E. It can be concluded that beta-carotene is an important factor in bovine reproduction and that its specific role cannot be taken over by vitamin A.     

Effect of the post-deposition annealing on electrical characteristics of MIS structures with HfO2/SiO2 gate dielectric stacks

In this work, we report on effects of post-deposition annealing on electrical characteristics of metal–insulator–semiconductor (MIS) structures with HfO₂/SiO₂ double gate dielectric stacks. Obtained results have shown the deterioration of electro-physical properties of MIS structures, e.g. higher interface traps density in the middle of silicon forbidden band (D_itmb), as well as non-uniform distribution and decrease of breakdown voltage (U_br) values, after annealing above 400 °C. Two potential hypothesis of such behavior were proposed: the formation of interfacial layer between hafnia and silicon dioxide and the increase of crystallinity of HfO₂ due to the high temperature treatment. Furthermore, the analysis of conduction mechanisms in investigated stacks revealed Poole–Frenkel (P–F) tunneling at broad range of electric field intensity.     

Arc-evaporated CrN, CrN and CrCN coatings

The results of investigations of some tribological properties of chromium nitride, carbonitride and carbide films, prepared by cathodic arc-evaporation method (CAE) are presented in this article. The chemical composition of films was determined by the WDXs and EDXs. The different carbon content was obtained by using nitrogen and acetylene mixtures of various concentrations as the deposition atmosphere. The carbon content was ranging from 0 to 53 at.%. The adhesion of CrCN films was estimated from the analysis of scratch-test results comprising tangential (friction) force, acoustic emission and morphology of scratch surface. The films showed very good adhesion to steel substrates, expressed by L_c (critical load) value, as high as 90 N for carbon free films. The L_c decreased slightly as the carbon content increased. The hardness of films was investigated as a function of carbon content and was estimated by Jönsson-Hogmark method. The L_c value and hardness seem to be correlated in the same way with carbon content. The highest hardness (30 GPa) was obtained for CrN films, while carbon rich films (CrC) showed hardness at the level of 20 GPa. The tribological tests were performed in the ball-on-disk geometry in room air under the load of 1 N and 10 N. The wear rate of investigated films increased with carbon content above 20 at.%. The maximum value of the friction coefficient was 0.55, the same as for CrN films. It decreased to 0.33 as the carbon content increased.     

Assessment of sealed fire states by fire characteristic

The paper presented assessment of sealed fire states in underground coal mines by so-called ＂fire characteristic＂, which graphically described tendencies of fire gas components - oxygen, nitrogen, carbon dioxide, carbon monoxide and hydrocarbons - in time. In order to mark gas components tendencies in time the authors applied the time series analysis. The case studied confirmed, that analysis of fire gas components tendencies in time and their correlation allow to elicit proper conclusions about fire state assessment. Assessment of fire states based on single value of fire indexes without considering their trends in time and correlation between trends of gas components would give wrong results. The suggested method can appropriately indicate fire states in a sealed area.     

Melatonin and the Brain–Heart Crosstalk in Neurocritically Ill Patients—From Molecular Action to Clinical Practice

Brain injury, especially traumatic brain injury (TBI), may induce severe dysfunction of extracerebral organs. Cardiac dysfunction associated with TBI is common and well known as the brain–heart crosstalk, which broadly refers to different cardiac disorders such as cardiac arrhythmias, ischemia, hemodynamic insufficiency, and sudden cardiac death, which corresponds to acute disorders of brain function. TBI-related cardiac dysfunction can both worsen the brain damage and increase the risk of death. TBI-related cardiac disorders have been mainly treated symptomatically. However, the analysis of pathomechanisms of TBI-related cardiac dysfunction has highlighted an important role of melatonin in the prevention and treatment of such disorders. Melatonin is a neurohormone released by the pineal gland. It plays a crucial role in the coordination of the circadian rhythm. Additionally, melatonin possesses strong anti-inflammatory, antioxidative, and antiapoptotic properties and can modulate sympathetic and parasympathetic activities. Melatonin has a protective effect not only on the brain, by attenuating its injury, but on extracranial organs, including the heart. The aim of this study was to analyze the molecular activity of melatonin in terms of TBI-related cardiac disorders. Our article describes the benefits resulting from using melatonin as an adjuvant in protection and treatment of brain injury-induced cardiac dysfunction.     

Polyphenol-Enriched Composite Bone Regeneration Materials: A Systematic Review of In Vitro Studies

One of the possible alternatives for creating materials for the regeneration of bone tissue supporting comprehensive reconstruction is the incorporation of active substances whose controlled release will improve this process. This systematic review aimed to identify and synthesize in vitro studies that assess the suitability of polyphenolics as additives to polymer-ceramic composite bone regeneration materials. Data on experimental studies in terms of the difference in mechanical, wettability, cytocompatibility, antioxidant and anti-inflammatory properties of materials were synthesized. The obtained numerical data were compiled and analyzed in search of percentage changes of these parameters. The results of the systematic review were based on data from forty-six studies presented in nineteen articles. The addition of polyphenolic compounds to composite materials for bone regeneration improved the cytocompatibility and increased the activity of early markers of osteoblast differentiation, indicating a high osteoinductive potential of the materials. Polyphenolic compounds incorporated into the materials presumably give them high antioxidant properties and reduce the production of reactive oxygen species in macrophage cells, implying anti-inflammatory activity. The evidence was limited by the number of missing data and the heterogeneity of the data.     

New method for the on-line signature verification based on horizontal partitioning

Verification of identity based on the analysis of dynamic signatures is an important problem of biometrics. The effectiveness of the verification significantly increases when the dynamic characteristics of signature (e.g. velocity of the pen) are considered. These characteristics are individual for each user and difficult to imitate. The effectiveness of the verification can be further improved by using partitioning. In this paper we propose a new method which uses partitioning. In our method partitions represent areas of high and low speed of signature and high and low pen?s pressure. All selected partitions are used by our algorithm, but more important in the classification process are these partitions, in which the signatures of the user acquired during training phase are more stable. Moreover, final classification is interpretable. In this paper we present the simulation results of the proposed method for the two databases: SVC2004 and BioSecure Database.     

The Hydrophilic Loop of Arabidopsis PIN1 Auxin Efflux Carrier Harbors Hallmarks of an Intrinsically Disordered Protein

Much of plant development depends on cell-to-cell redistribution of the plant hormone auxin, which is facilitated by the plasma membrane (PM) localized PIN FORMED (PIN) proteins. Auxin export activity, developmental roles, subcellular trafficking, and polarity of PINs have been well studied, but their structure remains elusive besides a rough outline that they contain two groups of 5 alpha-helices connected by a large hydrophilic loop (HL). Here, we focus on the PIN1 HL as we could produce it in sufficient quantities for biochemical investigations to provide insights into its secondary structure. Circular dichroism (CD) studies revealed its nature as an intrinsically disordered protein (IDP), manifested by the increase of structure content upon thermal melting. Consistent with IDPs serving as interaction platforms, PIN1 loops homodimerize. PIN1 HL cytoplasmic overexpression in Arabidopsis disrupts early endocytic trafficking of PIN1 and PIN2 and causes defects in the cotyledon vasculature formation. In summary, we demonstrate that PIN1 HL has an intrinsically disordered nature, which must be considered to gain further structural insights. Some secondary structures may form transiently during pairing with known and yet-to-be-discovered interactors.     

Novel Cyclopentaquinoline and Acridine Analogs as Multifunctional,Potent Drug Candidates in Alzheimer’s Disease

A series of new cyclopentaquinoline derivatives with 9-acridinecarboxylic acid and a different alkyl chain length were synthesized, and their ability to inhibit cholinesterases was evaluated. All designed compounds, except derivative 3f, exhibited a selectivity for butyrylcholinesterase (BuChE) with IC₅₀ values ranging from 103 to 539 nM. The 3b derivative revealed the highest inhibitory activity towards BuChE (IC₅₀ = 103.73 nM) and a suitable activity against AChE (IC₅₀ = 272.33 nM). The 3f derivative was the most active compound to AChE (IC₅₀ = 113.34 nM) with satisfactory activity towards BuChE (IC₅₀ = 203.52 nM). The potential hepatotoxic effect was evaluated for both 3b and 3f compounds. The 3b and 3f potential antioxidant activity was measured using the ORAC-FL method. The 3b and 3f derivatives revealed a significantly higher antioxidant potency, respectively 35 and 25 higher than tacrine. Theoretical, physicochemical, and pharmacokinetic properties were calculated using ACD Labs Percepta software. Molecular modeling and kinetic study were used to reveal the mechanism of cholinesterase inhibition in the most potent compounds: 3b and 3f.