Facilitating GL13K Peptide Grafting on Polyetheretherketone via 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide: Surface Properties and Antibacterial Activity

In the present work, the antimicrobial peptide (AMP) of GL13K was successfully coated onto a polyetheretherketone (PEEK) substrate to investigate its antibacterial activities against Staphylococcus aureus (S. aureus) bacteria. To improve the coating efficiency, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was mixed with a GL13K solution and coated on the PEEK surface for comparison. Both energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) data confirmed 30% greater peptide coating on PEEK/GL13K-EDC than PEEK without EDC treatment. The GL13K graft levels are depicted in the micrograms per square centimeter range. The PEEK/GL13K-EDC sample showed a smoother and lower roughness (Rq of 0.530 µm) than the PEEK/GL13K (0.634 µm) and PEEK (0.697 µm) samples. The surface of the PEEK/GL13K-EDC was more hydrophilic (with a water contact angle of 24°) than the PEEK/GL13K (40°) and pure PEEK (89°) samples. The pure PEEK disc did not exhibit any inhibition zone against S. aureus. After peptide coating, the samples demonstrated significant zones of inhibition: 28 mm and 25 mm for the PEEK/GL13K-EDC and PEEK/GL13K samples, respectively. The bacteria-challenged PEEK sample showed numerous bacteria clusters, whereas PEEK/GL13K contained a little bacteria and PEEK/GL13K-EDC had no bacterial attachment. The results confirm that the GL13K peptide coating was able to induce antibacterial and biofilm-inhibitory effects. To the best of our knowledge, this is the first report of successful GL13K peptide grafting on a PEEK substrate via EDC coupling. The present work illustrates a facile and promising coating technique for a polymeric surface to provide bactericidal activity and biofilm resistance to medical implantable devices.     

Assessing support alternatives for longwall gateroads subject to changing stress

Longwall gateroad entries are subject to changing horizontal and vertical stress induced by redistribution of loads around the extracted panel. The stress changes can result in significant deformation of the entries that may include roof sag, rib dilation, and floor heave. Mine operators install different types of supports to control the ground response and maintain safe access and ventilation of the longwall face. This paper describes recent research aimed at quantifying the effect of longwall-induced stress changes on ground stability and using the information to assess support alternatives. The research included monitoring of ground and support interaction at several operating longwall mines in the U.S., analysis and calibration of numerical models that adequately represent the bedded rock mass, and observation of the support systems and their response to changes in stress. The models were then used to investigate the impact of geology and stress conditions on ground deformation and support response for various depths of cover and geologic scenarios. The research results were summarized in two regression equations that can be used to estimate the likely roof deformation and height of roof yield due to longwall-induced stress changes. This information is then used to assess the ability of support systems to maintain the stability of the roof. The application of the method is demonstrated with a retrospective analysis of the support performance at an operating longwall mine that experienced a headgate roof fall. The method is shown to produce realistic estimates of gateroad entry stability and support performance, allowing alternative support systems to be assessed during the design and planning stage of longwall operations.     

Polybrominated diphenyl ethers in the sediments of the Great Lakes. 3. Lakes Ontario and Erie

Sediment cores were taken in 2002 in Lakes Ontario and Erie at four locations. A total of 48 sediment samples were characterized, dated using 210Pb, and analyzed for 10 congeners of polybrominated diphenyl ethers (PBDEs) including BDE209 as well as 39 congeners of polychlorinated biphenyls (PCBs). The surficial concentrations of nine tri- through hepta-BDE congeners (sigma9PBDE) are 4.85 and 6.33 ng g(-1), at sampling sites ON40 and ON30 in Lake Ontario, and 1.83 and 1.95 ng g(-1) at ER37 and ER09 in Lake Erie, respectively, based on dry sediment weight. The surficial BDE209 concentrations are 242 and 211 ng g(-1) at ON40 and ON30 and 50 and 55 ng g(-1) at ER37 and ER09. The sigma(9-) PBDEs fluxes to the sediment around 2002 are 147 and 195 pg cm(-2) year(-1) at ON40 and ON30 and 136 and 314 pg cm(-2) year(-1) at ER37 and ER09, respectively. The fluxes of BDE209 are 6.5 and 7.3 ng cm(-2) year(-1) at ON30 and ON40 and 3.7 and 8.9 ng cm(-2) year(-1) at ER37 and ER09, respectively. Dramatic increases in PBDE concentrations and fluxes upward toward the sediment surface and the present time are evident at both locations in Lake Ontario, while PCBs concentrations peak in the middle of sediment cores around the dated time of 1970s and 1960s. For both locations of Lake Erie, the increasing trends of both PBDEs and PCBs from the bottom to the surficial segments were distorted by sediment mixing. BDE209 is the most abundant congener among PBDEs in the sediments, constituting about 96 and 91% of the total PBDEs on mass basis in Lakes Ontario and Erie, respectively.     

An Open Grid Services Architecture Primer

To expand the use of distributed computer infrastructures as well as facilitate grid interoperability, OGSA has developed standards and specifications that address a range of scenarios, including high-throughput computing, federated data management, and service mobility.     

“Thank heavens for the lease”: histories of shared ownership

Drawing on and developing Kingdon’s multiple streams analysis, this article examines the development of one aspect of the UK’s low cost home ownership programme: shared ownership. We demonstrate how key human and non-human policy entrepreneurs were able to set the agenda from 1973–1983 in favour of shared ownership; they neutralized the alternatives, while retaining some of their instruments; and solved a number of early problems by bringing key players into the programme. Our data-sets include a range of archival material and elite interviews. The policy entrepreneurs included John Stanley (who was the housing minister in the First Thatcher government), the National Federation of Housing Associations, and the Building Societies Association. Our development of the multiple streams analysis is to argue that documents, including the lease, act as policy entrepreneurs in their own right. The lease was central to the development of shared ownership and its transformation into a model lease enrolled other organizations, most critically the building societies.     

Analysis of reactions during sintering of CuO-doped 3Y-TZP nano-powder composites

3Y-TZP (yttria-doped tetragonal zirconia) and CuO nano powders were prepared by co-precipitation and copper oxalate complexation–precipitation techniques, respectively. During sintering of powder compacts (8 mol% CuO-doped 3Y-TZP) of this two-phase system several solid-state reactions clearly influence densification behaviour. These reactions were analysed by several techniques like XPS, DSC/TGA and high-temperature XRD. A strong dissolution of CuO in the 3Y-TZP matrix occurs below 600 °C, resulting in significant enrichment of CuO in a 3Y-TZP grain-boundary layer with a thickness of several nanometres. This “transient” liquid phase strongly enhances densification. Around 860 °C a solid-state reaction between CuO and yttria as segregated to the 3Y-TZP grain boundaries occurs, forming Y₂Cu₂O₅. This solid-state reaction induces the formation of the thermodynamic stable monoclinic zirconia phase. The formation of this solid phase also retards densification. Using this knowledge of microstructural development during sintering it was possible to obtain a dense nano–nano composite with a grain size of only 120 nm after sintering at 960 °C.     

Structure–Property Relation of SrTiO3/LaAlO3 Interfaces

A large variety of transport properties have been observed at the interface between the insulating oxides SrTiO₃ and LaAlO₃ such as insulation, 2D interface metallicity, 3D bulk metallicity, magnetic scattering, and superconductivity. The relation between the structure and the properties of the SrTiO₃/LaAlO₃ interface can be explained in a meaningful way by taking into account the relative contribution of three structural aspects: oxygen vacancies, structural deformations (including cation disorder), and electronic interface reconstruction. The emerging phase diagram is much richer than for related bulk oxides due to the occurrence of interface electronic reconstruction. The observation of this interface phenomenon is a display of recent advances in thin film deposition and characterization techniques, and provides an extension to the range of exceptional electronic properties of complex oxides.     

The impact of thermal conductivity and diffusion rates on water vapor transport through gas diffusion layers

Proper water management in a hydrogen-fueled polymer electrolyte membrane (PEM) fuel cell is critical for performance and durability. A mathematical model has been developed to elucidate the effect of thermal conductivity and water vapor diffusion coefficient in the gas diffusion layers (GDLs). The fraction of product water removed in the vapor phase through the GDL as a function of GDL properties/set of material and component parameters and operating conditions has been calculated. The current model enables identification of conditions wherein condensation occurs in each GDL component. The model predicts the temperature gradient across various components of a PEM fuel cell, providing insight into the overall mechanism of water transport in a given cell design. The water condensation conditions and transport mode in the GDL components depend on the combination of water vapor diffusion coefficients and thermal conductivities of the GDL components. Different types of GDLs and water transport scenarios are defined in this work, based on water condensation in the GDL and fraction of water that the GDL removes through the vapor phase, respectively.     

Antifungal activity of solventlessly synthesized organomercurials

A series of new barbituryl/thiobarbituryl substituted organomercurial derivatives 3a-i have been synthesised from pyrimidine derivatives 1a-c and arylmercuric chloride 2a-c over K(2)CO(3) under microwave irradiations (MWI). This solventless synthesis apart from eliminating organic solvent from workup step, also gave improved yield as compared to the conventional heating, with reaction time reduced from hours to minutes. The prepared compounds were tested against A. niger and A. flavous for their antifungal activity and were found to posses good activity.