A model-based method for organizing tasks in product development

This research is aimed at structuring complex design projects in order to develop better products more quickly. We use a matrix representation to capture both the sequence of and the technical relationships among the many design tasks to be performed. These relationships define the technical structure of a project, which is then analyzed in order to find alternative sequences and/or definitions of the tasks. Such improved design procedures offer opportunities to speed development progress by streamlining the inter-task coordination. After using this technique to model design processes in several organizations, we have developed a design management strategy which focuses attention on the essential information transfer requirements of a technical project.     

InSb focal plane array chemical imaging enables assessment of unit process efficiency for milling operation

In the dry milling of wheat flour, each unit process (roller mill, purifier, sifter, etc.) produces a mixture with varying amounts of wheat endosperm and non-endosperm byproducts. Chemical images with 82 000 pixels of each intermediate product stream issuing from an individual processing machine are readily analyzed in terms of the relative amount of endosperm and non-endosperm. Approximately three minutes is required to produce an image of each intermediate product stream. Applying partial least squares (PLS) chemometric software to identify individual pixels, which enables calculation of the relative amount of endosperm and non-endosperm, is not a time-limiting factor. When relative flow rates are known for each stream, mass balance can be calculated from each intermediate stream in terms of the product (endosperm content) and the lower value non-endosperm byproduct. Data is presented from a purifier in a commercial flour mill. Intermediate streams collected from a run with optimized operational parameters were compared to those of another run before adjustment. The endosperm (product) mass balance profile for each run enabled assessment of operational efficiency. The devised chemical imaging analysis system would be particularly useful in commissioning of a new mill or to optimize existing wheat milling systems. Also, when raw material differs from that for which previous optimization was established, a new optimization may be in order. The ability to acquire a large number of spectra from a specimen and apply multivariate statistics to identify each pixel and subsequently count pixels accommodates heterogeneity and reports the results from averaging a very large number of individual spectra. A second illustration of the utility of the imaging method is presented centering on streams from the first and second break unit operations at the beginning of the roller mill process.     

Nanostructured, molecularly imprinted, and template-patterned polythiophenes for chiral sensing and differentiation

An innovation to thin-film molecular imprinting is presented for the sensitive detection and effective discrimination of chiral compounds using a portable quartz crystal microbalance transduction technique. The facile approach involves i) colloidal sphere layering of latex particles onto the surface via a Langmuir-Blodgett-like technique followed by ii) template molecular imprinting using electrodeposition of a single functional and cross-linking monomer.     

An E3‐14.7K Peptide that Promotes Microtubules‐Mediated Transport of Plasmid DNA Increases Polyplexes Transfection Efficiency

Chemical vectors as cationic polymers and cationic lipids are promising alternatives to viral vectors for gene therapy. Beside endosome escape and nuclear import, plasmid DNA (pDNA) migration in the cytosol toward the nuclear envelope is also regarded as a limiting step for efficient DNA transfection with non‐viral vectors. Here, the interaction between E3‐14.7K and FIP‐1 to favor migration of pDNA along microtubules is exploited. E3‐14.7K is an early protein of human adenoviruses that interacts via FIP‐1 (Fourteen.7K Interacting Protein 1) protein with the light‐chain components of the human microtubule motor protein dynein (TCTEL1). This peptide is conjugated with pDNA and mediates interaction of pDNA in vitro with isolated microtubules as well as with microtubules in cellulo. Videomicroscopy and tracking treatment of images clearly demonstrate that P79‐98/pDNA conjugate exhibits a linear transport with large amplitude along microtubules upon 2 h transfection with polyplexes whereas control pDNA conjugate exhibits small non‐directional movements in the cytoplasm. Remarkably, P79‐98/peGFP polyplexes enhance by a factor 2.5 (up to 76%) the number of transfected cells. The results demonstrate, for the first time, that the transfection efficiency of polyplexes can be drastically increased when the microtubules migration of pDNA is facilitated by a peptide allowing pDNA docking to TCTEL1. This is a real breakthrough in the non viral gene delivery field that opens hope to build artificial viruses.     

Analytical characterization of the electrospray ion source in the nanoflow regime

A detailed characterization of a conventional low-flow electrospray ionization (ESI) source for mass spectrometry (MS) using solution compositions typical of reversed-phase liquid chromatography is reported. Contrary to conventional wisdom, the pulsating regime consistently provided better ESI-MS performance than the cone-jet regime for the interface and experimental conditions studied. This observation is supported by additional measurements showing that a conventional heated capillary interface affords more efficient sampling and transmission for the charged aerosol generated by a pulsating electrospray. The pulsating electrospray provided relatively constant MS signal intensities over a wide range of voltages, while the signal decreased slightly with increasing voltage for the cone-jet electrospray. The MS signal also decreased with increasing emitter-interface distance for both pulsating and cone-jet electrosprays due to the expansion of the charged aerosol plume. At flow rates below 100 nL/min, the MS signal increased with increasing flow rate due to increased number of gas-phase ions produced. At flow rates greater than 100 nL/min, the signal reached a plateau due to decreasing ionization efficiency at larger flow rates. These results suggest approaches for improving MS interface performance for low-flow (nano- to micro-) electrosprays.     

Creation of Faceted Polyhedral Microgels from Compressed Emulsions

Compressed monodisperse emulsions in confined space exhibit highly ordered structures. The influence of the volume fraction and the confinement geometry on the organized structures is investigated and the mechanism by which structural transition occurs is studied. Based on the understanding of ordering behavior of compressed emulsions, a simple and high‐throughput method to fabricate monodisperse polyhedral microgels using the emulsions as the template is developed. By controlling the geometry of the confined spaces, a variety of shapes such as hexagonal prism, Fejes Toth honeycomb prism, truncated octahedron, pyritohedron, and truncated hexagonal trapezohedron are implemented. Moreover, the edge sharpness of each shape is controllable by adjusting the drop volume fraction. This design principle can be readily extended to other shapes and materials, and therefore provides a useful means to create polyhedral microparticles for both fundamental study and practical applications.     

Remote-sensing reflectance of turbid sediment-dominated waters. Reduction of sediment type variations and changing illumination conditions effects by use of reflectance ratios

Variations of sediment type (grain size and refractive index) and changing illumination conditions affect the reflectance signal of coastal waters and limit the accuracy of sediment-concentration estimations from remote-sensing measurements. These effects are analyzed from numerous in situ remote-sensing measurements carried out in the Gironde and Loire Estuaries and then reduced and partly eliminated when reflectance ratios between the near infrared and the visible are considered. These ratios showed high correlation with the sediment concentration. On the basis of the obtained relationships, performing correspondence functions were established that allow an accurate estimation of suspended sediments in the estuaries from Système Probatoire d'Observation de la Terre, Landsat, and Sea-Viewing Wide Field-of-View Sensor data, independently of the date of acquisition.     

Atomic layer deposition of iron(III) oxide on zirconia nanoparticles in a fluidized bed reactor using ferrocene and oxygen

Conformal films of amorphous iron(III) oxide and α-Fe₂O₃ have been coated on zirconia nanoparticles (26 nm) in a fluidized bed reactor by atomic layer deposition. Ferrocene and oxygen were alternately dosed into the reactor at temperatures between 367 °C and 534 °C. Self-limiting chemistry was observed via in situ mass spectrometry, and by means of induced coupled plasma-atomic emission spectroscopy analysis. Film conformality and uniformity were verified by high resolution transmission electron microscopy, and the growth rate was determined to be 0.15 Å per cycle. Energy dispersive spectroscopy, X-ray diffractometry, and X-ray photoelectron spectroscopy were utilized as a means to determine film composition at each deposition temperature. Over all of the deposition temperatures investigated, films were deposited as amorphous iron(III) oxide. However, after heat treatment at 850 °C in air and N₂ atmospheres, α-Fe₂O₃ was the predominant species.     

Enhanced Solar‐to‐Hydrogen Generation with Broadband Epsilon‐Near‐Zero Nanostructured Photocatalysts

The direct conversion of solar energy into fuels or feedstock is an attractive approach to address increasing demand of renewable energy sources. Photocatalytic systems relying on the direct photoexcitation of metals have been explored to this end, a strategy that exploits the decay of plasmonic resonances into hot carriers. An efficient hot carrier generation and collection requires, ideally, their generation to be enclosed within few tens of nanometers at the metal interface, but it is challenging to achieve this across the broadband solar spectrum. Here the authors demonstrate a new photocatalyst for hydrogen evolution based on metal epsilon‐near‐zero metamaterials. The authors have designed these to achieve broadband strong light confinement at the metal interface across the entire solar spectrum. Using electron energy loss spectroscopy, the authors prove that hot carriers are generated in a broadband fashion within 10 nm in this system. The resulting photocatalyst achieves a hydrogen production rate of 9.5 µmol h^?1 cm^?2 that exceeds, by a factor of 3.2, that of the best previously reported plasmonic‐based photocatalysts for the dissociation of H₂ with 50 h stable operation.     

A Comparision of Starch Granules as Seen by Both Scanning Electron and Ordinary Light Microscopy

Starch being a transparent crystal often give images which are difficult to precisely define with the light microscope due to the diffraction and other effects such as internal structure which may appear as a surface phenomena. The scanning electron microscope (SEM); however, gives only surface detail. In a effort to differentiate between surface and internal details, the same starch granules have been studied by both ordinary light and scanning electron microscopy. In each case the granules were held in the same configuration as was seen with the light microscope when they were studied by SEM. In this way a direct comparison could be made between granules viewed by each microscopy technique. From such comparisons it is possible to determine the starch details that are actually due to internal features. The results for canna, potato and corn starches are given.