Hybrid cam mechanisms

This paper investigates the problem of driving a machine with several reciprocating heavy inertias. The drive should also realize some programmable flexibility of the motion, so that the operation of the machine, e,g., synchronization between different motions and duration of standstills, can easily be modified. The use of a single servomotor for every motion is not the best solution, since it does not allow for energy recuperation. This means that the installed servomotor power will be much higher than the required net peak power for the machine as a whole. The presented solution, however, reduces the servomotor peak torque and power by one order of magnitude, and makes energy transfer between the motions possible. The hybrid cam mechanism consists of a hybrid drive, which is a combination of a servomotor, a constant velocity motor and a cam follower mechanism. The operation principle exploits the nonlinear characteristics of the cam to add flexibility at low cost of energy. The hybrid solution is particularly successful for motions involving high peak acceleration. In addition, the concept can be used to reject disturbances. Simulations show the performance of the hybrid cam mechanism.     

Kaolinite-mullite reaction series: a TEM study

The kaolinite-mullite reaction series in single crystal kaolinite has been characterized by transmission electron microscopy. The exotherm observed at 980° C is attributed to the formation of a spinel phase. Mullite crystallites have also been observed with the spinel phase and both phases have a composition near that of 32 mullite. Subsequent heat treatment leads to the growth of mullite crystallites on the original kaolinite plates with the c-axis perpendicular to the plate.     

Crystal structure of synthesized CuGaTe2 determined by X-ray powder diffraction using the Rietveld method

A full profile X-ray powder diffraction structure refinement has been carried out on a sample of synthesized CuGaTe₂ using graphite monocromatized CuK step-scan data and a profile shape of the Pearson VII type. The most satisfactory convergence was achieved at R _p = 0.0666, R _wp = 0.0884, R _B = 0.0106 and R _F = 0.0102. The derived structural parameters at 26.5°C are: a = 0.602348(7), c = 1.193979(2) nm and x(Te) = 0.256(6). The ratio between lattice parameters, = c/2a = 0.9911 (0), differs from 1.0, indicating a tetragonal distortion, and non-ideal anion displacements, x(Te)1/4, is manifested by the existence of bond alternation of Cu-Te and Ga-Te with interatomic distances of 0.262(5) and 0.2578(5) nm, respectively. These results show a light tetrahedral deformation produced by four-fold tetrahedra of the copper cation in the CuGaTe₂ chalcopyrite-type structure.     

Accurate determination of the mean relative humidity in controlled climates at high humidities (new method)

The measurement of the relative humidity (RH) at high levels to the desired accuracy is still a problem, especially for levels above 90% RH. The reasons for this are:

• i The accuracy of the standard apparatus is lower at high RH than at moderate and low RH;
• ii The need for accurate measurement of the RH in moisture controlled rooms is greater at high RH than at lower RH, because for moisture sensitive products, such as fibreboard boxes and certain horticultural products, the influence of a minor deviation in RH on the properties of these products is considerably greater at high RH than at moderate and low RH.

     

Seven-pinhole tomography of the thyroid

In this paper we introduce a new application of the sevenpinhole (7P) collimator: tomographic imaging of the thyroid. The collimator design has been reoptimized for this particular application by diminishing the distance from the collimator plate to the crystal and by choosing a smaller pinhole diameter. To reconstruct thyroid images from the two-dimensional projection data we use a method which we developed for 7P tomographic imaging of the heart [1]. Phantom experiments and patient studies demonstrate that this new device is capable of producing tomographic images of good quality and high resolution. Therefore, it seems to offer a promising alternative to conventional planar imaging of the thyroid (using a single-pinhole collimator).     

Beam profile measurement of a solar-pumped iodine laser

Beam profile measurements have been made as a function of time within the laser pulse and C2F5I pressure. Measurements indicate that the profile is determined directly by the optical excitation volume, produced by the solar simulator, and that media distortion plays a minor role compared to the build up of quenching species during the lasing pulse.     

Site occupations and ordering behaviour of O phase in Ti2AlNb—based intermetallics

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｏｒｔｈｏｒｈｏｍｂｉｃａｌｌｏｙｓａｒｅｏｆｇｒｅａｔｔｅｃｈ ｎｏｌｏｇ ｉｃａｌｉｎｔｅｒｅｓｔｉｎｈｉｇｈｔｅｍｐｅｒａｔｕｒｅａｐｐｌｉｃａｔｉｏｎｓｓｉｎｃｅｔｈｅｙｈａｖｅａｇｏｏｄｂａｌａｎｃｅａｍｏｎｇｓｔ     

The role of consultant engineers on personnel training and desalination plant operation

The raising countries asking for desalination plants are 0.011:0 normally in trouble for the period of time between taking over of the plant and the first two years of operation.During this period it is very useful to use proper consultants to supervise plant operation and train operating, maintenance and management personnel.In the present paper appropriate schemes of cooperation are outlined togheter with a particullary idea about plant operation control.     

Elongational viscosity of microbead suspensions

A ‘tubeless syphon’ was used as an elongational viscometer for the purpose of measuring elongational viscosities of glass bead suspensions in dilute polymer solutions. It was found that while the shear viscosities increased, the elongational viscosities decreased very sharply with increasing bead concentration. The conclusions from the present data are then compared with the observed changes in the elastic properties of two phase molten polymer systems. A double shift procedure has been successfully adopted to correlate the experimental data.