A parallel hp‐FEM infrastructure for three‐dimensional structural acoustics

This paper describes a parallel three‐dimensional numerical infrastructure for the solution of a wide range of time‐harmonic problems in structural acoustics and vibration. High accuracy and rate of error‐convergence, in the mid‐frequency regime,is achieved by the use of hp‐finite and infinite element approximations. The infrastructure supports parallel computation in both single and multi‐frequency settings. Multi‐frequency solves utilize concurrent factoring of the frequency‐dependent linear algebraic systems and are naturally scalable. Scalability of large‐scale single‐frequency problems is realized by using FETI‐DP—an iterative domain‐decomposition scheme. Numerical examples are presented to cover applications in vibratory response of fluid‐filled elastic structures as well as radiation and scattering from elastic structures submerged in an infinite acoustic medium. We demonstrate both the numerical accuracy as well as parallel scalability of the infrastructure in terms of problem parameters that include wavenumber and number of frequencies, polynomial degree of finite/infinite element approximations as well as the number of processors. Scalability and accuracy is evaluated for both single and multiple frequency sweeps on four high‐performance parallel computing platforms: SGI Altix, SGI Origin, IBM p690 SP and Linux‐cluster. Results show good performance on shared as well as distributed‐memory architecture. Copyright © 2006 John Wiley & Sons, Ltd.     

An improved auto-tuning scheme for PI controllers

Ziegler-Nichols tuned PI and PID controllers are usually found to provide poor performances for high-order and nonlinear systems. In this study, an improved auto-tuning scheme is presented for Ziegler-Nichols tuned PI controllers (ZNPICs). With a view to improving the transient response, the proportional and integral gains of the proposed controller are continuously modified based on the current process trend. The proposed controller is tested for a number of high-order linear and nonlinear dead-time processes under both set-point change and load disturbance. It exhibits significantly improved performance compared to ZNPIC, and Refined Ziegler-Nichols tuned PI controller (RZNPIC). Robustness of the proposed scheme is established by varying the controller parameters as well as the dead-time of the process under control.     

Pinch Roller Failure Analysis and Resulting Enhancement of Rebar Mechanical Properties

Reinforcing bars, popularly termed “rebars,” are used to impart tensile strength to concrete structures. Concrete has high resistance to weathering and fire and high compressive strength but almost no tensile strength, hence rebars are used to provide the latter to concrete. Property consistency along the length of rebars is an important prerequisite. When the finished product is subjected to thermomechanical treatment (TMT), proper control of rolling and water box parameters and efficient pinch rolling are needed to achieve acceptable properties. Variation of yield strength (YS) along TMT bars from the front to back end has been observed within the same heat treatment. In the presented investigation, it was observed that pinch rolling ineffectiveness is the main reason for the poor mechanical properties at the back end. The pinch roller was unable to support the back end of the TMT bars properly to maintain the speed and tension of the bars, resulting in nonuniform cooling of the back end through the water box and subsequent mechanical property failure. Due to the substandard material of the pinch roller, it was unable to hold the back end of the bar properly. Based on analysis of the roller it was concluded that it failed due to improper microstructure, resulting in inadequate hardness and toughness for the stringent operating conditions. AISI H13 is a better material to use in such high-service-temperature conditions. Moreover, proper heat treatment is needed to achieve adequate hardness and microstructure properties. After proper heat treatment of pinch rollers, their service life was increased twofold, minimizing the YS variation along the rebars.     

An EPQ model with promotional demand in random planning horizon: population varying genetic algorithm approach

One of the economic production quantity problems that have been of interest to researchers is the production with reworking of the imperfect items including waste most disposal form and vending the units. The available models in the literature assumed that the decay rate of the items is satisfied from three different points of view: (i) minimum demands of the customer’s requirement, (ii) demands to be enhanced for lower selling price and (iii) demands of the customers who are motivated by the advertisement. The model is developed over a finite random planning horizon, which is assumed to follow the exponential distribution with known parameters. The model has been illustrated with a numerical example, whose parametric inputs are estimated from market survey. Here the model is optimized by using a population varying genetic algorithm.     

An adaptive plant leaf mobile informatics using RSSC

Multimedia Tools and Applications - An automated plant biometric system is now an important step in preserving nature’s biodiversity. This paper presents a novel Relative Sub-image Sparse...     

Friction Stir Welding (FSW) of Aged CuCrZr Alloy Plates

Friction Stir Welding (FSW) of Cu-0.80Cr-0.10Zr (in wt pct) alloy under aged condition was performed to study the effects of process parameters on microstructure and properties of the joint. FSW was performed over a wide range of process parameters, like tool-rotation speed (from 800 to 1200 rpm) and tool-travel speed (from 40 to 100 mm/min), and the resulting thermal cycles were recorded on both sides (advancing and retreating) of the joint. The joints were characterized for their microstructure and tensile properties. The welding process resulted in a sound and defect-free weld joint, over the entire range of the process parameters used in this study. Microstructure of the stir zone showed fine and equiaxed grains, the scale of which varied with FSW process parameters. Grain size in the stir zone showed direct correlation with tool rotation and inverse correlation with tool-travel speed. Tensile strength of the weld joints was ranging from 225 to 260 MPa, which is substantially lower than that of the parent metal under aged condition (~ 400 MPa), but superior to that of the parent material under annealed condition (~ 220 MPa). Lower strength of the FSW joint than that of the parent material under aged condition can be attributed to dissolution of the precipitates in the stir zone and TMAZ. These results are presented and discussed in this paper.

     

Influence of Cryoprocessing on Mechanism of Carbide Development in Cobalt-Bearing High-Speed Steel (M35)

Cryogenic treatment has been used commonly to high-speed tool steels to enhance the wear resistance of the materials. In the current research study, specimens of complex alloyed high-speed tool steel (M35) were hardened at 1473 K (1200 °C), triple tempered at 673 K (400 °C) and then cryogenically treated at 88 K (?185 °C) for varying lengths of period starting from 16 to 48 hours of cryosoaking followed by soft tempering at 373 K (100 °C). These treated specimens were studied as a function of cryosoaking period for their electrical resistivity, residual compressive stress, and its correlation with carbide density was established. TEM analysis indicated carbide size 0.156 to 1 μm, which confirms that the cryogenic treatment enhances the precipitation of finer carbides. Lower residual stresses in the higher carbide density regimes identified in 2D contour map were explained by the stress relaxation in the matrix through precipitation of incoherent carbides.     

Guidelines and recommendations for indoor use of fuel cells and hydrogen systems

Hydrogen energy applications often require that systems are used indoors (e.g., industrial trucks for materials handling in a warehouse facility, fuel cells located in a room, or hydrogen stored and distributed from a gas cabinet). It may also be necessary or desirable to locate some hydrogen system components/equipment inside indoor or outdoor enclosures for security or safety reasons, to isolate them from the end-user and the public, or from weather conditions.Using of hydrogen in confined environments requires detailed assessments of hazards and associated risks, including potential risk prevention and mitigation features. The release of hydrogen can potentially lead to the accumulation of hydrogen and the formation of a flammable hydrogen-air mixture, or can result in jet-fires. Within Hyindoor European Project, carried out for the EU Fuel Cells and Hydrogen Joint Undertaking safety design guidelines and engineering tools have been developed to prevent and mitigate hazardous consequences of hydrogen release in confined environments. Three main areas are considered: Hydrogen release conditions and accumulation, vented deflagrations, jet fires and including under-ventilated flame regimes (e.g., extinguishment or oscillating flames and steady burns). Potential RCS recommendations are also identified.     

Complexation of methyl salicylate with β-cyclodextrin and its release characteristics for active food packaging

Food Science and Biotechnology - A series of methyl salicylate (MeSA)/β-cyclodextrin (β-CD) inclusion complexes (ICs) were prepared at different MeSA concentrations by the...