Torsional Surface Waves in an Initially Stressed Anisotropic Porous Medium

It is well known that the homogeneous elastic half space does not allow the torsional surface wave to propagate. The present article attempts to study the possibility of propagation of such waves in a liquid-filled initially stressed poroelastic layer over nonhomogeneous half space. The study concludes that torsional surface waves may propagate in the poroelastic layer. The presence of fluid in pores and initial compressive stresses diminishes the velocity. The nonhomogeneity in rigidity and density of the half space also has a certain role to play in initiating, enhancing, or diminishing the velocity of torsional surface waves.     

Investigation of Pt and Pd Modified WO<Subscript>3</Subscript> and ZnO Based Thin Film Sensors for Ethanol Sensing

Ethanol sensors based on different WO₃ and ZnO structures are studied in the present work. The XRD and SEM processes are used to characterize the sensing layer’s surface morphology which reveals the presence of nanoparticle in sensing layer. Further reducing the nanoparticle diameter by the addition of palladium (Pd) and platinum (Pt) for both the sensors (ZnO and WO₃) gives good results on sensitivity, operating temperature, response time and recovery time. Nanoparticle diameter for undoped WO₃, Pd-modified WO₃ and Pt-modified WO₃ based sensors is 11.8, 6 and 5.4 nm, whereas nanoparticle diameter for undoped, Pd-modified and Pt-modified ZnO based sensors is 20, 14 and 11 nm, respectively. Analysis of dynamic response of the sensors when exposed to different concentrations of ethanol vapour (from 500 to 10,000 ppm) and various temperatures indicate the improvement in sensitivity up to 77.2% for WO₃ and 74.6% for ZnO based sensors.     

Synthesis,Characterization, and drug release study of acrylamide‐co‐itaconic acid based smart hydrogel

A new kind of pH and temperature responsive poly(acrylamide‐co‐itaconic acid) hydrogel was prepared by free radical polymerization using ammonium persulfate as initiator and different comonomer ratios. The hydrogels were characterized in terms of chemical composition, swelling‐deswelling behavior, morphology, crystallographic behavior, and drug release properties. All the hydrogels showed high swelling ability in aqueous solutions, the maximum being at pH 7. Swelling decreased on either side of pH 7 (i.e., both in acidic and alkaline region) and increased with increase in temperature. The hydrogel with 10 mol% itaconic acid (IA) absorbed maximum water among the copolymer gels. The cellular structures of the hydrogels were clearly revealed by microscopic analysis and SEM pictures. Swelling of the gels in water followed non‐Fickian type of diffusion principle. The hydrogel was proved to be a controlled release vehicle, for example in drug delivery by using its smart properties. The hydrogel with 10 mol% IA also absorbed maximum amount of drug (ascorbic acid) under study. Incorporation of drug in hydrogel matrix was established from XRD peak analysis. POLYM. ENG. SCI., 55:113–122, 2015. © 2014 Society of Plastics Engineers     

Optimal Sizing of a DBD Ozone Generator Using Response Surface Modeling

Dielectric barrier discharge (DBD) reactors used as ozone generators are well known today and widely used for water treatment and air disinfection. The purpose of this article is to propose an experimental procedure based on the response surface modeling in order to optimize the geometrical dimensions of the cylindrical shape ozone generator, i.e., the discharge gap and the electrodes length. Because an effective ozone generator is expected to give high ozone concentration with a minimum of power requirements, the applied high voltage was associated with the geometrical parameters to carry out a composite centered faces design. Obtained results indicate that for an efficient ozone generator, length of the electrodes needs to be optimized while the discharge gap should be minimized.     

Synthesis and Biological Evaluation of Ferrocenylquinoline as a Potential Antileishmanial Agent

The emergence of resistance against antileishmanial drugs in current use necessitates the search for new classes of antileishmanial compounds. Herein we report the design, synthesis, and evaluation of a novel ferrocenylquinoline for activity against Leishmania donovani. 7‐Chloro‐N‐[2‐(1H‐5‐ferrocenyl‐1,2,3‐triazol‐1‐yl)ethyl]quinolin‐4‐amine ( 1 ) was generated by coupling an iron(II) ethynylferrocene species with 4‐(2‐ethylazido)amino‐7‐chloroquinoline using click chemistry. The synthesized compound 1 was tested for its antileishmanial activity using both promastigote and amastigote stages of L. donovani. Compound 1 showed promising anti‐promastigote activity, with an IC₅₀ value of 15.26 μM and no cytotoxicity toward host splenocytes. From the battery of tests conducted in this study, it appears that this compound induces parasite death by promoting oxidative stress and depolarizing the mitochondrial membrane potential, thereby triggering apoptosis. These results suggest that ferrocenylquinoline 1 is a suitable lead for the development of new antileishmanial drugs.     

Nanoindentation of Soda Lime–Silica Glass: Effect of Loading Rate

Structural and mechanical reliability of glass for both conventional and advanced applications is determined by the rate at which it can deform and sustain externally applied static or dynamic strain at the microstructural length scale. Hence, a large number of nanoindentation experiments were conducted on a thin (∼300 μm) commercial soda lime–silica glass with a 150 nm radius Berkovich tip at a constant load of 10,000 μN as a function of variations in the loading rates in the range of 10–20,000 μN/s. The results showed that the nanohardness of the soda lime–silica glass increased by as much as 74% as the loading rate was increased from 10 to 20,000 μN/s. Further, the presence of serrations in load–depth plots and deformation band formations inside the nanoindentaion cavities were more vividly observed in the nanoindentation experiments conducted at lower loading rates rather than those conducted at higher loading rates. These results are explained in terms of shear stress acting underneath the indenter as well as the time scale of interaction between the nanoindenter and the weak links at local microstructural length scale, which owe their origin to the subtle variations in the composition of the given glass.     

Erythropoietin Action in Stress Response,Tissue Maintenance and Metabolism

Erythropoietin (EPO) regulation of red blood cell production and its induction at reduced oxygen tension provides for the important erythropoietic response to ischemic stress. The cloning and production of recombinant human EPO has led to its clinical use in patients with anemia for two and half decades and has facilitated studies of EPO action. Reports of animal and cell models of ischemic stress in vitro and injury suggest potential EPO benefit beyond red blood cell production including vascular endothelial response to increase nitric oxide production, which facilitates oxygen delivery to brain, heart and other non-hematopoietic tissues. This review discusses these and other reports of EPO action beyond red blood cell production, including EPO response affecting metabolism and obesity in animal models. Observations of EPO activity in cell and animal model systems, including mice with tissue specific deletion of EPO receptor (EpoR), suggest the potential for EPO response in metabolism and disease.     

Rheological studies of two component high build epoxy and polyurethane based high performance coatings

The work presented in this article involves the study of rheometric profile of several rheological additives in two-component (2K) high build epoxy zinc phosphate primer and two-component high build aliphatic polyurethane topcoat. Viscosity profile and thixotropic behavior at different shear rates have been determined for both the paints using Physica MCR 301 Rheometer of Anton Paar. The valuable information derived from these measurements led to better insight into the influence of these rheological additives on important paint properties like flow and leveling, sag control, in-can settling during storage, etc. Rheometric results were also compared with the results obtained during the actual application of these experimental coatings on mild steel panels. From the rheological study it was concluded that the thickeners based on surface-modified clay and organically modified castor oil derivative work well in epoxy zinc phosphate primer whereas polyurea-based thickener showed better results than other rheological additives in the case of the 2K polyurethane system. Measurement of low shear and high shear viscosity response of different thickeners helps in predicting storage and application behavior of these coatings which correlates well with the actual observation.