33.7 MHz heavy-ion radio frequency quadrupole linac at VECC Kolkata

A 33.7 MHz heavy-ion radio frequency quadrupole (RFQ) linear accelerator has been designed, built, and tested. It is a four-rod-type RFQ designed for acceleration of 1.38 keVu, qA> or =116 ions to about 29 keVu. Transmission efficiencies of about 85% and 80% have been measured for the unanalyzed and analyzed beams, respectively, of oxygen ((16)O(2+), (16)O(3+), (16)O(4+)), nitrogen ((14)N(3+), (14)N(4+)), and argon ((40)Ar(4+)). The system design and measurements along with results of beam acceleration test will be presented.     

Iron-Doped,Mullite-Impregnated PVDF Composite: An Alternative Separator for a High Charge Storage Ceramic Capacitor

In this communication, the formation mechanism of the electroactive β phase, morphology and the dielectric activities of increasing doping concentration (0–1.2 M.W % of mullite) of Fe²⁺ ion-doped, mullite-impregnated polyvinylidene fluoride (PVDF) nanocomposite have been investigated. Differential thermal analysis (DTA) confirms the formation of an electroactive β phase, and Fourier transform infrared spectroscopy (FTIR) showed that the β phase increases simultaneously and attains the maximum increment of 2.6 times compared to pristine PVDF. X-ray diffraction (XRD) spectra also agreed well with the β-phase increment behaviour and also confirmed the presence of required mullite phases. Field emission scanning electron microscopy (FESEM) images indicate the strong interaction between the polymer matrix and different concentrations of Fe²⁺ ion-doped mullite particles, resulting in enhanced electroactive β phase formation and large dielectric constant of the nanocomposite films followed by significant low dielectric loss with high ac conductivity compared to pristine PVDF films at room temperature. This doped polymer composite can be used as a high dielectric separator and, using this separator, we have successfully fabricated a high-charge-storage device. This paper also demonstrates that the loading of conductive Fe²⁺ ions within the highly insulating mullite matrix has a critical concentration for the enhancement and nucleation of the electroactive β phase of the PVDF polymer. In this critical concentration, the highest formation of a β network and maximum numbers of homogeneously distributed iron-doped mullite (FeM) particles in PVDF matrix improves the effective interfacial polarization by Maxwell–Wagner–Sillar (MWS) polarization effect which is responsible for the enhancement of dielectric constant and ac conductivity followed by significant tangent loss. So, it can be concluded that the incorporation of Fe²⁺-doped mullite into PVDF matrix is an effective way to fabricate a high dielectric separator of high-charge-storage electronic devices.     

Variability in rheology of cemented paste backfill with hydration age,binder and superplasticizer dosages

The use of (CPB) material to ameliorate geotechnical stability of underground mine is in nascent stage in India. Rheological properties of CPB change with travelling time as it is transported to underground mine stope through pipeline reticulation. In this paper, rheological properties of CPB based on mill tailings of a carbonate rich mineral processing waste are evaluated for different dosages of polycarboxylate (PC) based (SP). Each CPB sample having 78?wt% solids is mixed separately with 4%, 6% or 8% of binder dosages (ratio of the weight of dry binder to the weight of dry tailings) and, 0%, 0.5%, or 1.0% of SP dosages as weight of dry binder. The paper presents a methodology for determining yield stress, plastic viscosity and thixotropic behaviour of CPB mixture as a function of hydration age, binder and SP dosages. Results from the experimental campaigns indicate that SP content has significant influence on rheological behaviour of CPB and can be suitably exploited to enhance the flow characteristics of the carbonate rich process tailings. The study also develops multivariate linear regression models of yield stress, plastic viscosity and thixotropy of CPB depending on the hydration age, binder and SP dosages.     

Efficient Design of Bi-circular Patch Antenna for 5G Communication with Mathematical Calculations for Resonant Frequencies

Wireless Personal Communications - In this paper the conventional circular patch has been reshaped by two circular arcs with the FR4 Epoxy material for substrate. This is supported by the...     

Substrate-induced magnetic ordering and switching of iron porphyrin molecules

To realize molecular spintronic devices, it is important to externally control the magnetization of a molecular magnet. One class of materials particularly promising as building blocks for molecular electronic devices is the paramagnetic porphyrin molecule in contact with a metallic substrate. Here, we study the structural orientation and the magnetic coupling of in-situ-sublimated Fe porphyrin molecules on ferromagnetic Ni and Co films on Cu(100). Our studies involve X-ray absorption spectroscopy and X-ray magnetic circular dichroism experiments. In a combined experimental and computational study we demonstrate that owing to an indirect, superexchange interaction between Fe atoms in the molecules and atoms in the substrate (Co or Ni) the paramagnetic molecules can be made to order ferromagnetically. The Fe magnetic moment can be rotated along directions in plane as well as out of plane by a magnetization reversal of the substrate, thereby opening up an avenue for spin-dependent molecular electronics.     

Mössbauer Study of the Influence of Fe-Si-N Liquid in the Synthesis of β-Si3N4 from Silica

Mössbauer spectra of the products obtained by carbothermal reduction and distribution of silica in the presence of iron in the temperatures range 1200^o to 1540^o were studied. The preponderance of β- Si₃N₄ over the α form at a higher reaction temperature were assumed to be related to the formation of an Fe-Si-N liquid. The liquid did not alter its composition with the variation of reduction-temprature, Iron had no effect on the reaction mechanism below 1300^oC.     

Microprocessor controlled FSK/PSK wave modulation: experimentalmodel for a digital communication laboratory

A simple digitally programmable oscillator (DPO) based on a two-integrator loop is described. A simple experimental model for signal processing/generation (e.g., frequency shift keying, amplitude shift keying, phase shift keying/binary phase shift keying) useful in digital communication has been derived from the DPO by employing a microprocessor. The setup can be conveniently utilized for demonstration and experimentation in the communications laboratory. Some test results are included     

Cooling curves analysis of aluminium solidified without and with magnetic or electric field

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

Structuring Optimizing Transformations and Proving Them Sound

A compiler optimization is sound if the optimized program that it produces is semantically equivalent to the input program. The proofs of semantic equivalence are usually tedious. To reduce the efforts required, we identify a set of common transformation primitives that can be composed sequentially to obtain specifications of optimizing transformations. We also identify the conditions under which the transformation primitives preserve semantics and prove their sufficiency. Consequently, proving the soundness of an optimization reduces to showing that the soundness conditions of the underlying transformation primitives are satisfied.The program analysis required for optimization is defined over the input program whereas the soundness conditions of a transformation primitive need to be shown on the version of the program on which it is applied. We express both in a temporal logic. We also develop a logic called temporal transformation logic to correlate temporal properties over a program (seen as a Kripke structure) and its transformation.An interesting possibility created by this approach is a novel scheme for validating optimizer implementations. An optimizer can be instrumented to generate a trace of its transformations in terms of the transformation primitives. Conformance of the trace with the optimizer can be checked through simulation. If soundness conditions of the underlying primitives are satisfied by the trace then it preserves semantics.