Assessment of Bioaerosol Generation and Sampling Efficiency Based on Pantoea agglomerans

This study was conducted to evaluate the effect of aerosol generation, relative humidity, and method of sampling on the culturability of the vegetative bacteria Pantoea agglomerans (P. agglomerans) formerly known as Erwinia herbicola. This research has relevance both for the use of this organism as a biowarfare simulant and for bioaerosol exposure assessment and public health. The culturability of P. agglomerans was tested using a test chamber against two generating systems (Collison and Bubble nebulizers), two sampling systems (the all-glass impinger (AGI-30), and the BioSampler), three collection media (water, TSB, and PBS) and across a range of humidities. Results indicated that the Bubble nebulizer was 15% more efficient in generating viable P. agglomerans counts (p ≤ 0.05). No difference was observed in overall efficiency between sampling methods (p > 0.05). However, as a collection media, PBS was observed to yield higher (p ≤ 0.01) viable counts compared to sterile deionized water. Relative humidity was found to strongly influence airborne P. agglomerans culturability. Culturable P. agglomerans was below the limit of detection for RH < 15% and then increased in a log-linear fashion to humidities of 75%. This research will help identify optimal means for evaluation of environmentally sensitive airborne bacteria for purposes of exposure assessment and public health as well as homeland security.     

Impact of electrically formed interfacial layer and improved memory characteristics of IrOx/high-κx/W structures containing AlOx,GdOx, HfOx,and TaOx switching materials

Improved switching characteristics were obtained from high-κ oxides AlO_x, GdO_x, HfO_x, and TaO_x in IrO_x/high-κ_x/W structures because of a layer that formed at the IrO_x/high-κ_x interface under external positive bias. The surface roughness and morphology of the bottom electrode in these devices were observed by atomic force microscopy. Device size was investigated using high-resolution transmission electron microscopy. More than 100 repeatable consecutive switching cycles were observed for positive-formatted memory devices compared with that of the negative-formatted devices (only five unstable cycles) because it contained an electrically formed interfacial layer that controlled ‘SET/RESET’ current overshoot. This phenomenon was independent of the switching material in the device. The electrically formed oxygen-rich interfacial layer at the IrO_x/high-κ_x interface improved switching in both via-hole and cross-point structures. The switching mechanism was attributed to filamentary conduction and oxygen ion migration. Using the positive-formatted design approach, cross-point memory in an IrO_x/AlO_x/W structure was fabricated. This cross-point memory exhibited forming-free, uniform switching for >1,000 consecutive dc cycles with a small voltage/current operation of ±2 V/200 μA and high yield of >95% switchable with a large resistance ratio of >100. These properties make this cross-point memory particularly promising for high-density applications. Furthermore, this memory device also showed multilevel capability with a switching current as low as 10 μA and a RESET current of 137 μA, good pulse read endurance of each level (>10⁵ cycles), and data retention of >10⁴ s at a low current compliance of 50 μA at 85°C. Our improvement of the switching characteristics of this resistive memory device will aid in the design of memory stacks for practical applications.     

The Role of Vitamin A in Retinal Diseases

Vitamin A is an essential fat-soluble vitamin that occurs in various chemical forms. It is essential for several physiological processes. Either hyper- or hypovitaminosis can be harmful. One of the most important vitamin A functions is its involvement in visual phototransduction, where it serves as the crucial part of photopigment, the first molecule in the process of transforming photons of light into electrical signals. In this process, large quantities of vitamin A in the form of 11-cis-retinal are being isomerized to all-trans-retinal and then quickly recycled back to 11-cis-retinal. Complex machinery of transporters and enzymes is involved in this process (i.e., the visual cycle). Any fault in the machinery may not only reduce the efficiency of visual detection but also cause the accumulation of toxic chemicals in the retina. This review provides a comprehensive overview of diseases that are directly or indirectly connected with vitamin A pathways in the retina. It includes the pathophysiological background and clinical presentation of each disease and summarizes the already existing therapeutic and prospective interventions.     

Antivirulence Isoquinolone Mannosides: Optimization of the Biaryl Aglycone for FimH Lectin Binding Affinity and Efficacy in the Treatment of Chronic UTI

Uropathogenic E. coli (UPEC) employ the mannose‐binding adhesin FimH to colonize the bladder epithelium during urinary tract infection (UTI). Previously reported FimH antagonists exhibit good potency and efficacy, but low bioavailability and a short half‐life in vivo. In a rational design strategy, we obtained an X‐ray structure of lead mannosides and then designed mannosides with improved drug‐like properties. We show that cyclizing the carboxamide onto the biphenyl B‐ring aglycone of biphenyl mannosides into a fused heterocyclic ring, generates new biaryl mannosides such as isoquinolone 22 (2‐methyl‐4‐(1‐oxo‐1,2‐dihydroisoquinolin‐7‐yl)phenyl α‐d ‐mannopyranoside) with enhanced potency and in vivo efficacy resulting from increased oral bioavailability. N‐Substitution of the isoquinolone aglycone with various functionalities produced a new potent subseries of FimH antagonists. All analogues of the subseries have higher FimH binding affinity than unsubstituted lead 22 , as determined by thermal shift differential scanning fluorimetry assay. Mannosides with pyridyl substitution on the isoquinolone group inhibit bacteria‐mediated hemagglutination and prevent biofilm formation by UPEC with single‐digit nanomolar potency, which is unprecedented for any FimH antagonists or any other antivirulence compounds reported to date.     

Polyacrylate-coated graphene-oxide and graphene solution via chemical route for various biological application

In this work, we have developed a polyacrylate-coated graphene-oxide and then chemically reduced them into graphene. We found that polyacrylate coating can improve the colloidal stability of both graphene-oxide/graphene. They show good colloidal stability in different aqueous buffer solution with pH ranging from 5 to 10, and these solutions are stable for more than a month. The polyacrylate-coated grapheme oxide/graphene has been characterized by X-ray photoemission spectroscopy (XPS) and micro-Raman spectroscopy. Based on good colloidal stability, this graphene-oxide/graphene is most suitable for the biological application.     

Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method

High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and chemical composition of the crystals from a monetite to a hydroxyapatite phase were controlled by varying the starting concentrations of the precursors and the solution pH through the amount of urea that is decomposed during heating. X-ray diffraction (XRD) analysis, infrared spectroscopy (IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) were used to investigate the products of the syntheses in order to find the optimum reaction conditions for obtaining the desired morphology and phase composition. Different morphologies ranging from single crystals of monetite through rods and plates of hydroxyapatite with different size distribution to whisker-like single hydroxyapatite crystal were achieved by simply varying the starting concentration of urea. Structural refinement of the hydroxyapatite whiskers confirmed a strong preferential orientation along the c-axis direction of the hexagonal crystal structure, which was significantly different from the usually observed random crystal orientation. TEM and SEM analysis of the apatite whiskers confirmed single crystal structure with the a c-axis orientation parallel to the long axis of the whiskers, with sizes up to 150 μm in length, 10 μm in width and with a thickness of about 300 nm, that grew from the same centre of nucleation, forming flaky-like particles.