氮化硅反应烧结的研究进展

氮化硅作为高温功能陶瓷性能优越，但将其制备成陶瓷零件比较困难，目前一般用反应烧结法制备氮化硅陶瓷零件。此外，反应烧结制备氮化硅陶瓷还具有成本低、烧结温度低、产品成型好、陶瓷高温性能好等优点。综述了氮化硅陶瓷反应烧结工艺流程和工艺的优缺点，着重介绍了氮化硅反应烧结在成型工艺、烧结工艺、原材料影响、后处理和陶瓷增韧等方面所取得的进展。     

结构性土二元介质模型的有限元模拟

针对土的结构性对边坡稳定性的影响,结构性土二元介质模型将胶结元看成理想弹脆性材料,摩擦元看成硬化型弹塑性材料。基于该模型建立考虑结构性土的强度准则,编制相应有限元程序用于Biot固结的有限元模拟。通过对比初始各向同性和初始应力各向异性结构性土的天然边坡算例计算结果,发现初始应力各向异性天然边坡的安全系数要高于初始均质天然边坡;嵌入初始应力各向异性结构性土的强度准则后可以观察计算过程中边坡破坏区的发展,为采用破坏区贯通作为边坡的破坏标准的天然边坡的稳定性分析提供了一种新的思路且具有良好的工程适用性。     

内燃法整体热处理工艺在压力容器上的应用

介绍了粘油氧化反应器的内燃法整体热处理以及易出现的问题和对策.     

Learning high-dimensional correspondence via manifold learning and local approximation

The recent years have witnessed a surge of interests of learning high-dimensional correspondence, which is important for both machine learning and neural computation community. Manifold learning–based researches have been considered as one of the most promising directions. In this paper, by analyzing traditional methods, we summarized a new framework for high-dimensional correspondence learning. Within this framework, we also presented a new approach, Local Approximation Maximum Variance Unfolding. Compared with other machine learning–based methods, it could achieve higher accuracy. Besides, we also introduce how to use the proposed framework and methods in a concrete application, cross-system personalization (CSP). Promising experimental results on image alignment and CSP applications are proposed for demonstration.     

多孔羟基磷灰石生物陶瓷的进展

多孔羟基磷灰石生物陶瓷是一种性能优异的人体硬组织修复材料，在植入界面后它具生物降解性，置入体内能逐步参与代谢以至最终与人体骨结合成一体。本文在综合大量国内外文献的基础上，阐述了多孔羟基磷灰石生物陶瓷的性质、研究和发展。     

Seasonal evolution of the interannual variability of chlorophyll-a concentration and its forcing factors in the northwestern Pacific from 1998 to 2010

The northwestern Pacific Ocean is a complex region with significant biological spatial variations on a seasonal timescale. To investigate the joint variation patterns on both seasonal and interannual timescales, a season-reliant empirical orthogonal function (S-EOF) analysis was applied to seasonal mean chlorophyll-a concentration (chl-a) anomalies in the northwestern Pacific Ocean during the period 1998–2010. The first two dominant modes accounted for nearly 31% of the total interannual variance, with the second S-EOF mode (S-EOF2) lagging behind the first S-EOF mode (S-EOF1) by one year. S-EOF1 featured a strong variation pattern to the north of 30° N, with maximum chl-a in winter and minimum chl-a in summer. However, S-EOF2 indicated an opposite seasonally evolving pattern compared with S-EOF1, with chl-a increasing along the Kuroshio and extension current from boreal winter to autumn. Both these modes revealed significant relationships with climate-related indices. The two modes corresponded to the central Pacific (CP) La Niña developing episodes and the turnaround from eastern Pacific (EP) La Niña to CP El Niño, respectively. Both modes were associated with the cold phase of the Pacific Decadal Oscillation, which played an important role in prolonging the impact of the El Niño/Southern Oscillation on chl-a seasonal evolution from 1998 to 2010. In addition, we discuss the possible factors dominating chl-a seasonal variation, in terms of the subregions of the northwestern Pacific Ocean. In the subtropical northwestern Pacific Ocean (15° N – 30° N), the chl-a growth was primarily nutrient-limited, whereas in the mid-latitude northwestern Pacific Ocean (35° N – 50° N), the chl-a growth was mainly light-limited.     

基体韧性对PS改性PVC体系性能的影响

研究了PS对未增韧PVC体系及用CPE预增韧PVC体系韧性的影响,发现在用CPE预增韧PVC基体后,PS的增韧效果更为显著,但增韧机理井无改变,仍可用"空穴增韧"的机理来解释。     

聚合型受阻酚抗氧剂的合成及应用

研究了以对甲酚为主要原料合成聚合型受阻酚抗氧剂的工艺。结果表明，树脂缩合反应条件是对甲酚与双环戊二烯为3：1～1．25，ZnCl2催化剂为对甲酚质量分数的2．0％，反应温度为75～80℃，双环戊二烯滴加时间为2h。烷基化反应温度为70～75℃，H2S04催化剂为缩合树脂质量分数的2．0％。制得的聚合型受阻酚抗氧剂产品对聚氨酯泡沫用聚醚2802具有较好的抗氧化性，起燃温度达224℃。     

MH对EBA阻燃及热降解行为影响

采用极限氧指数法、热重分析和差示扫描量热分析等技术和手段研究了氢氧化镁（MH）对乙烯-丙烯酸丁酯共聚物（EBA）的阻燃性能、力学性能及热降解行为的影响。结果表明：EBA／MH复合材料的拉伸强度、断裂伸长率和熔体流动速率均随着MH用量的增加而降低；当MH的质量分数为60％时，复合材料的极限氧指数可达34．3％；MH通过分解吸热可提高EBA的热稳定性；MH表面羟基与EBA的反应性基团发生相互作用，以及EBA发生酯裂解后形成的羧酸与MH反应形成热稳定性更高的离聚物，均可提高EBA在高温下的热稳定性，并改变EBA的热降解历程。MH的“热阱”机理对EBA的阻燃起着很重要的作用。     

Rate control of hierarchical B prediction structure for multi-view video coding

Rate control plays an important role in regulating bit streams in video coding. In order to obtain good coding performance, the hierarchical B prediction structure has been adopted in Multi-view Video Coding (MVC). However, the conventional rate control scheme is not efficient in the hierarchical B prediction structure. In this paper, we propose a rate control algorithm to address this problem. First, the accurate estimation of Mean Absolute Distortion (MAD) of the current frame is desired for both quantization parameter (QP) selection and Rate Distortion Optimization (RDO). Considering the hierarchical B structure, a bi-directional MAD prediction model is proposed to predict the MAD of the current frame by using the actual MADs of the encoded frames in the lower Temporal Layers (TLs). Second, the number of header bits has a close relationship with the TLs in the hierarchical B prediction structure. Therefore, we propose an enhanced prediction method in which a proportional relationship of the header bits is introduced if the frames are located in different TLs. Experimental results show that our proposed algorithm can achieve both accurate target bit rate and good coding performance.