EEG extended source imaging with structured sparsity and $$L_1$$ -norm residual

Neural Computing and Applications - It is a long-standing challenge to reconstruct the locations and extents of cortical neural activities from electroencephalogram (EEG) recordings, especially...     

一种提升泵车臂架位置检测精度的工程应用解决方案

针对在利用倾角传感器实现混凝土泵车之类的大型操作机的臂架姿态的间接测量方案中存在的因为臂架的柔性和操作机在不同姿态下自身水平状态的不同可能导致的臂架末端的理论计算值存在较大测量误差的问题,采用了一种在臂架的不同位置增加传感器来实现对臂架柔性变形大小和自身水平状态的实时检测的方法,并着重研究了针对具体的柔性变形及水平状态变化所导致的理论偏差进行实时补偿的切实可行的方法,实验检测的数据证明,相对补偿前臂架的定位精度提升了75％以上.     

石英晶体振荡器的微处理器温度补偿技术研究

为改善石英晶体振荡器的频率特性,减小温度影响,通过对石英晶体振荡器的频率-温度特性的研究,提出了以微处理器（STC89C52RC）为核心的基于AT切晶体谐振器的温度补偿技术,并介绍了系统结构、补偿原理及硬件电路,给出了补偿结果。本设计具有结构简单、功耗低等优点。     

Morse set classification and hierarchical refinement using Conley index

Morse decomposition provides a numerically stable topological representation of vector fields that is crucial for their rigorous interpretation. However, Morse decomposition is not unique, and its granularity directly impacts its computational cost. In this paper, we propose an automatic refinement scheme to construct the Morse Connection Graph (MCG) of a given vector field in a hierarchical fashion. Our framework allows a Morse set to be refined through a local update of the flow combinatorialization graph, as well as the connection regions between Morse sets. The computation is fast because the most expensive computation is concentrated on a small portion of the domain. Furthermore, the present work allows the generation of a topologically consistent hierarchy of MCGs, which cannot be obtained using a global method. The classification of the extracted Morse sets is a crucial step for the construction of the MCG, for which the Poincare′ index is inadequate. We make use of an upper bound for the Conley index, provided by the Betti numbers of an index pair for a translation along the flow, to classify the Morse sets. This upper bound is sufficiently accurate for Morse set classification and provides supportive information for the automatic refinement process. An improved visualization technique for MCG is developed to incorporate the Conley indices. Finally, we apply the proposed techniques to a number of synthetic and realworld simulation data to demonstrate their utility.     

On delay adjustment for dynamic load balancing in distributed virtual environments

Distributed virtual environments (DVEs) are becoming very popular in recent years, due to the rapid growing of applications, such as massive multiplayer online games (MMOGs). As the number of concurrent users increases, scalability becomes one of the major challenges in designing an interactive DVE system. One solution to address this scalability problem is to adopt a multi-server architecture. While some methods focus on the quality of partitioning the load among the servers, others focus on the efficiency of the partitioning process itself. However, all these methods neglect the effect of network delay among the servers on the accuracy of the load balancing solutions. As we show in this paper, the change in the load of the servers due to network delay would affect the performance of the load balancing algorithm. In this work, we conduct a formal analysis of this problem and discuss two efficient delay adjustment schemes to address the problem. Our experimental results show that our proposed schemes can significantly improve the performance of the load balancing algorithm with neglectable computation overhead.     

分段线性动态矩匹配条带去除

由于探测器之间对接收的地物辐射信号的响应特征不同,导致遥感数据含有条带噪声,严重影响了图像质量及后续的定量计算。针对探测器响应函数在图像低值区及高值区呈非线性的特点,在着重分析矩匹配方法的基础上,提出分段线性动态矩匹配条带去除方法。方法设定阈值分割高中低值域统计区间,对探测器响应函数进行分段线性拟合,并对探测器每一分图像动态采用其领域内均值和标准差作为参考值进行条带纠正。应用TM数据第4波段及环境一号卫星高光谱数据进行去条带实验,并定性和定量地比较了该方法与动态矩匹配、傅里叶变换、自动均衡化曲线方法的去条带效果。结果表明该方法能够在保留图像基本信息的前提下,获得最佳的去条带效果,尤其能够提高非均匀地物分布区域内水体的条带去除效果。     

不同增塑体系对丁腈橡胶老化前后及胶管扣压过程性能的影响

本文主要研究了不同增塑体系对丁腈橡胶老化前后物理机械性能的影响,以热油老化后的丁腈橡胶的应力-应变曲线作为材料参数,考察不同增塑体系对丁腈胶管扣压过程中性能变化的影响;硫化特性实验结果表明:使用DOP或DOA作为增塑剂时,硫化胶转矩差值较大,使用液体丁腈或聚硫橡胶作为增塑剂时,转矩差值相对较低,其中使用聚硫橡胶作为增塑剂时,焦烧时间较短;物理机械性能实验结果表明:使用液体丁腈或聚硫橡胶作为增塑剂时,丁腈橡胶硫化胶耐热空气老化性能保持率相对较高,耐热油老化后质量体积变化率相对较低;仿真计算结果表明:使用DOP或DOA作为增塑剂时,静刚度、应变能密度及节点处Mises应力较大,使用液体丁腈或聚硫橡胶作为增塑剂时,静刚度、应变能密度及节点处Mises应力相对较小。     

稀土元素对钯室温电学性能的影响

研究了稀浓度(0.6at％以下)稀土元素(La、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Er、Yb)对钯的室温电学性能的影响。所有稀土元素均提高钯的电阻率(p)、降低电阻温度系数(α),实验结果与理论分析证明(p·α)_((?)d-RE)d=(p·α)_(Pd)。Gd以前的稀土元素降低钯的对铜热电势(ε),其余重稀土元素增大钯的对铜热电势。按0.1at％RE归一化处理的实验数据表明,轻稀土元素对钯电阻率的影响稍大于重稀土,但Ce、Eu、Yb呈反常影响,化合价和尺寸因素是影响电学性能的主要因素。     

企业文化需要追求个性创新发展

企业文化理论从20世纪80年代提出以来,经过20多年的实践,如今发展快、口号多、落地难,有的演变为企业文化的“作秀”。要提升企业核心竞争力,必须在塑造优秀企业文化中,追求企业个性,避免雷同,求得创新发展。     

Functionalized metal–organic frameworks with strong acidity and hydrophobicity as an efficient catalyst for the production of 5-hydroxymethylfurfural

In the dehydration of fructose to 5-hydroxymethyl furfural(HMF), in situ produced water weakens the acid strength of the catalyst and causes the rehydration of HMF, causing unsatisfactory catalytic activity and selectivity. In this work, a class of benzenesulfonic acid-grafted metal–organic frameworks with strong acidity and hydrophobicity is obtained by the direct sulfonation method using 4-chlorobenzenesulfonic acid as sulfonating agent. The resultant MOFs have a specific surface area of greater than 250 m~2·g~(-1), acid density above 1.0 mmol·g~(-1), and water contact angle up to 129°. The hydrophobic MOF-Ph SO_3 H exhibits both higher catalytic activity and selectivity than MOF-SO_3 H in the HMF synthesis due to its better hydrophobicity and olephilicity. Moreover, the catalyst has a high recycled stability. At last, fructose is completely converted, and 98.0% yield of HMF is obtained under 120 °C in a DMSO solvent system. The successful preparation of the hydrophobic acidic MOF provides a novel hydrophobic catalyst for the synthesis of HMF.