有色高收缩涤纶毛条的研制

就生产有色高收缩涤纶毛条的工艺路线进行了比较．从主要纺丝工艺对收缩性的影响优选了物理改性祛的生产工艺，研制了满足精纺要求的有色高收缩涤纶毛条．     

Hydrogen Reduction and Microstructural Changes of ISF Sinter

The reduction rate and microstructural changes of imperial smelting furnace (ISF) sinter have been investigated by means of thermogravimetric analysis, X-ray difFraction (XRD), scanning electron microscope (SEM ), energy dispersive analysis of X-ray (EDAX) and optical microscope.It is demonstrated that the overall reaction rate of the reduction is influenced by temperature and hydrogen partial pressure in H2 /N2 gas mixtures. There are two distinct zones observed in the partially reduced sinter. The reduction of zincite proceeds predominantly in a narrow range between the two zones, while the reduction of tead oxide and silicate takes place throughout the sinter. The differences between zincite and lead oxide or silicate in reducibility are analysed by thermodynamlcs. The phase transformations and microstructural changes occurring during the reduction process are discussed     

3700系统死机问题之我见

本文从原理出发,对3700系统死机的根源进行了探索。作者认为,死机是由死循环造成的,且绝大多数死循环都与中断有关,而RACKO-TACKO菊花链及错误的返回地址则是引起死机的主要原因。通过对几个死机实例的详尽分折,作者也提出了寻找和分折死循环的一般性方法。     

无源微波遥感用于地震预报的实验研究

对无源微波遥感用于地震预报在理论研究的基础上对不同岩性不同结构的岩石试件进行了加载实验，测量了岩石试件的微波辐射随载荷的变化．实验得出：岩石试件的微波辐射能量随岩石应力状态变化而显著变化；而且，不同的波段变化的幅度不同；同一波段不同极化方式的波随应力变化的变化量也不同；微波辐射能量的变化能够被卫星微波遥感探测器探测到．实验还发现，岩石试件临破裂前出现明显的微波辐射异常．     

柔性制造系统生产中的零件分批算法

根据ＦＭＳ资源、加工任务、零件工艺提出了零件分批算法，该算法在零件交货期的束下，以机床负荷平衡为目标，搜索零件集合，找出最合适的零件组合形成零件加工批。此算法为简化ＦＭＳ的动态调度和提高系统生产率创造了条件。仿真结果表明分批算法是行之有效的。     

准连续Ti~(3+):Al_2O_3可调谐激光的研究

本文给出了Ti~(3+):Al_2O_3的准连续可调谐激光的实验结果。采用Nd:YAG内腔倍频532nm的准连续输出作为泵浦源,得到Ti~(3+):Al_2O_3的连续可调谐输出。波长覆盖范围为685nm到821nm。最大输出功率为293mW,斜率效率为20％,在805nm处的窄谱输出功率达240mW,总体转换效举为26％。     

基于精细积分法的干摩擦隔振系统稳定性的研究

本文利用摩擦隔振系统的计算模型，建立了系统的动力学方程，在此基础上，对干摩擦隔振系统的稳定性问题进行了分析，同时将精细积分法引入了求解过程，提高了计算的精度，并给出了相应的数值例题，本文的工作可为工程应用提供必要的计算依据。     

语音合成ASIC的原理与设计方法

本文阐述了语音合成专用集成电路(ASIC)的数字信号处理原理.采用波形自适应增量调制编码方法,研究并解决了语音信号的压缩与加密.用半定制标准单元CAD设计方法,CMOS工艺,完成了32K ROM 6秒语音ASIC芯片的设计.     

软土基坑工程中劈裂注浆防渗机理与应用

结合紧邻市政管线的软土基坑工程 ,分析劈裂注浆力学和防渗性能 ,确定技术方案 ,控制施工参数 ,在控制管线位移的前提下达到基坑防渗要求 ,为类似工程提供借鉴     

Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.