Complex structural contribution of the morphotropic phase boundary in Na0.5Bi0.5TiO3 - CaTiO3 system

The correlation between structure and dielectric properties of lead-free (1-x)Na_0.5Bi_0.5TiO₃ - xCaTiO₃ ((1-x)NBT - xCT) polycrystalline ceramics was investigated systematically by X-ray diffraction, combined with impedance spectroscopy for dielectric characterizations. The system shows high miscibility in the entire composition range. A morphotropic phase boundary (MPB), at 0.09?≤?x?<?0.15 was identified where rhombohedral and orthorhombic symmetries coexist at room temperature. The fraction of orthorhombic phase increases gradually with x in the MPB region. Dielectric measurements reveal that the relative permittivity increase with addition of Ca²⁺. This behavior is unusual with this kind of doping. A thermal hysteresis occurred only in the MPB composition which varies in a non-monotonically manner with x, detected by dielectric properties. This phenomenon is related to the crystalline microstructure by a linear relationship between the fraction of each phase and dielectric properties, and, more precisely, to the strong interaction between rhombohedral and orthorhombic phases.     

Transport of Gellan Gum Microbeads in Soil Columns of Various Grain Size Distributions

The transport of gellan gum microbeads as potential cell carriers was investigated in horizontal columns packed with different grain size classes of gravel (2–16 mm) and sand (0.25–2 mm). A suspension of microbeads was pulsed into each column for 6 h, followed by injection of water for 42 h. In general, the total amount of microbeads travelling across a given section of the column increased with injection time but decreased towards the column outlet, varying as a direct function of grain size. The results of this study demonstrate the feasibility of the transport of gellan gum microbeads through medium sand to medium gravel across distances up to 110 cm.     

Continuous Crystallization of Submicrometer Energetic Compounds

This study introduces the conception of an apparatus to crystallize continuously nanosized explosive or more generally nanosized organic materials. These materials can be elaborated in pure state or in form of mixtures of energetic and inert materials. The installation can produce nano‐RDX or nano‐PETN from 1 to 10 g h⁻¹ using a reactor containing one ultrasonic piezoelectric transducer. The present study describes the different parameters which influence the crystallization process. It presents first results of the parametric study of the influence of these parameters. The most important parameters which were already identified are the frequency of the ultrasonic piezoelectric transducer, the nature of the solvent, the liquid level in the reactor, the temperatures in the system, and the passing time of the aerosol droplets in the oven.     

Potential Applications of Cucurbit[n]urils Inclusion Complexes in Photodynamic Therapy

Cucurbit[n]urils (CB[n]s) have emerged as potential candidates for drug delivery in several areas due to their strong binding interactions and low toxicity. More recently, their benefits for a type of cancer treatment termed Photodynamic Therapy (PDT) have been recognized. The outcomes of this therapy rely on better drug delivery strategies and improving overall photoactivity of the drugs, which is where CB[n]s could have a strong impact. The effects of these molecular containers on photoactivity are discussed and new interesting work is highlighted.     

Characterization of recycled styrene butadiene rubber ground tire rubber: Combining X‐ray fluorescence,differential scanning calorimetry,and dynamical thermal analysis for quality control

Appraisal of the main rubber characterization techniques for styrene butadiene rubber (SBR) was performed on standard SBR samples as well as recycled ground tire rubber (GTR) from an industrial tire recycling facility, containing a blend of SBR and natural rubber. The aim of the work was to provide additional information relevant to quality control in the field of rubber recycling. Benchmark characterization of industrial samples by inductively coupled plasma optical emission spectrometry, atomic absorption spectrometry, solid‐state proton nuclear magnetic resonance, and elemental (CHNS) analysis are reported. X‐ray fluorescence spectrometry is shown to be rapid and quantitative for determining the zinc content in an industrial context. Thermogravimetric analysis, already used to determine carbon black and inorganic material content in rubbers and GTR, is recommended for determination of monomer weight ratios of SBR sources not containing other rubbers, but not for GTR. Differential scanning calorimetry (DSC) measurements of the glass‐transition show that changes in monomer ratio affect glass‐transition temperature values, and therefore, DSC can be used to detect changes in rubber composition from batch to batch. These results show that DSC and X‐ray fluorescence spectroscopy characterization techniques can be used for GTR and may lead to more thorough and rapid quality control procedures of these complex samples. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42692.     

High-Temperature, High-Pressure X-ray Investigation of Dicalcium Silicate

Energy-dispersive X-ray powder diffraction experiments have been investigated at high temperature and room pressure, and at high pressure and room temperature, starting from either γ- or β-Ca₂SiO₄. High-temperature studies were performed up to 1980 K, using a versatile heating cell. The high-temperature phase transformations previously described were reexamined. Volume and linear thermal expansions were measured for each Ca₂SiO₄ polymorph, γ, β, α';_L,α';_H, and α. Volume thermal expansion increases with increasing temperature except for α';_H, whose thermal expansion tends to decrease at elevated temperature. High-pressure investigations were performed in the 0–15 GPa pressure range, using a diamond anvil cell, with silicon oil as the pressure-transmitting medium. The value of the room-pressure bulk modulus K₀ , assuming a second-order BirchMurnaghan equation of state with K'₀= 4, is 140(8) GPa for γ-Ca₂SiO₄. The γ olivine form exhibits anisotropic compression, with the c axis as the most compressible. From such in situ high-pressure X-ray investigations, the γ-→Ca₂SiO₄ phase transformation induced by cold compression is clearly evidenced and extends from 2 to about 5 GPa.     

Mechanical Investigations on Agar Gels Using Atomic Force Microscopy: Effect of Deuteration

The isotopic effect of exchanging deuterium with hydrogen on the mechanical and surface properties of agar gel is examined. The elastic modulus of the D₂O gels obtained by AFM nanoindentation is significantly higher (factor of ≈1.5–2) than the modulus found in H₂O agar gels. Furthermore, the modulus is independent of loading rate. Surface imaging reveals that the surface roughness gets progressively smaller with increasing agar concentration. All these data suggest that the isotopic replacement of deuterium enhances the mechanical properties of the agar gel, with significant advantages in its use as a biphasic scaffold.

     

Carbon dioxide absorption by monoethanolamine in hollow fiber membrane contactors: A parametric investigation

A mathematical and numerical investigations on the gas–liquid absorption of carbon dioxide in monoethanolamine solutions in a hollow fiber membrane contactor device is described. The reactive absorption mechanism was built based on momentum and mass transport conservation laws in all three compartments involved in the process, i.e., the gas phase, the membrane barrier, and the liquid phase. The liquid absorbing solution flows in the fiber bore in which the velocity is assumed to obey a fully developed laminar flow, and the gas mixture circulates counter‐currently to the liquid flow in the shell side where the velocity is characterized by the Navier‐Stokes momentum balance equations. The average outlet gas and liquid concentrations, the reactive absorption flux, and the gas removal efficiencies are parametrically simulated with operational parameters such as gas flow rate, fresh inlet amine concentrations, and fiber geometrical characteristics. The shell velocity was described by other flow hydrodynamics models besides Navier‐Stokes and their simulated results were favorably compared to experimental data. © 2011 American Institute of Chemical Engineers AIChE J, 2012     

Investigation of OSN properties of PDMS membrane for the retention of dilute solutes with potential industrial applications

Few commercially available membranes can be used for organic solvent nanofiltration (OSN). Applying OSN in chemical industries is nevertheless of high interest to cut with energy consumption linked to solvent recycling and soluble catalysts recovery. A commercial membrane, PERVAP4060, was used to investigate the retention of dilute solutes in toluene feeds and to mimic metathesis medium. The studied solutes were R-BINAP a neutral polyaromatic molecule used in metathesis chemistry, tetraoctylammonium bromide (ToABr), a charged molecule used as a homogeneous catalyst and n-hexadecane. Retention of polar ToABr (95%) was higher than that of neutral R-BINAP (80%). The transfer mechanism, either pore flow or solution-diffusion, was discussed. All the results obtained suggested that the transport is governed by the solution-diffusion mechanism. The measured retentions could be explained in terms of solubility affinities and diffusion coefficients. The stability and performances of PERVAP4060 were well established, showing the strong potential for industrial applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48359.