Conductive PE-carbon composites by elongation flow injection moulding

In Part 1 and Part 2 of this paper the preparation of linear polyethylene (PE)-carbon black processed composites with conducting electrical properties was examined by means of elongation flow injection moulding. Mould geometry was optimized in the form of oriented double-armed bars so as to give enhanced mechanical properties combined with a high degree of electrical homogeneity. The present paper deals with composites using a high molecular weight PE matrix. It is shown that the injection-moulded composite material exhibits not only a lower percolation threshold, _c, than the conventionally pressure-moulded isotropic sample, but also conductivities two to three orders of magnitude larger than the latter. The radial and axial conductivity profiles, for concentrations well above _c, are discussed in the light of the molecular orientation variations across the bars as determined by birefringence. A segregation of primary filler particles, during flow-induced orientation, into axial channels has been shown to explain the enhancement of conductivity detected in the injected mouldings. In addition, for filler concentrations near 7%, -profile analysis indicates the development of a uniform conductive-stiff inner cylinder, several millimetres wide, homogeneously extending along the full length of the injected material.     

Floral volatiles ofTanacetum vulgare L. attractive toLobesia botrana den. et schiff. females

The European grapevine moth (EGVM),Lobesia botrana, is a major pest of grapes in Europe. Females are attracted to a nonhost plant: tansy (Tanacetum vulgare L.), which is a common weed in Slovakian vineyards. A steam distillate extract of tansy flowers was analyzed by means of a GC-EAG technique to screen constituents detected by the olfactory receptors of EGVM females. From more than 200 GC peaks, nine peaks corresponding to monoterpenoids released an EAG response in more than 70% of the females (N=15):p-cymene,d-limonene,-thujene,-thujone,-thujone, thujyl alcohol, terpinene-4-ol, (Z)-verbenol, and piperitone. The steam distillate of tansy as well as a synthetic blend of identified compounds released consistent attraction in a field cage. The use of nonhost plants and host plant odors in integrated pest management is discussed.     

Establishment of a reference library for evaluating computer ECG measurement programs

As a result of an international cooperative project entitled "Common Standards for Quantitative Electrocardiography" (CSE), an ECG reference data base has been established with the aim of standardizing computer-derived ECG measurements. The objective of the project is to reduce the wide variation in wave measurements currently obtained by ECG analysis programs. A library of 250 ECGs with selective ECG abnormalities was established and a comprehensive reviewing scheme was devised for the visual determination of the onsets and offsets of P, QRS, and T. This task was performed by a board of cardiologists on highly amplified, selected complexes from the library. A subset was examined in order to study beat-to-beat and intraobserver variability. By using a modified Delphi approach, individual outlying point estimates were eliminated in four successive rounds. In this way final referee estimates were obtained which proved to be highly reproducible and precise. A reference library has thereby been developed which allows testing of the performance of ECG measurement programs and is a useful instrument in establishing recommendations for more precise measurement rules and definitions.     

P2Y11 Agonism Prevents Hypoxia/Reoxygenation- and Angiotensin II-Induced Vascular Dysfunction and Intimal Hyperplasia Development

Vascular dysfunction in cardiovascular diseases includes vasomotor response impairments, endothelial cells (ECs) activation, and smooth muscle cells (SMCs) proliferation and migration to the intima. This results in intimal hyperplasia and vessel failure. We previously reported that activation of the P2Y11 receptor (P2Y11R) in human dendritic cells, cardiofibroblasts and cardiomyocytes was protective against hypoxia/reoxygenation (HR) lesions. In this study, we investigated the role of P2Y11R signaling in vascular dysfunction. P2Y11R activity was modulated using its pharmacological agonist NF546 and antagonist NF340. Rat aortic rings were exposed to angiotensin II (AngII) and evaluated for their vasomotor response. The P2Y11R agonist NF546 reduced AngII-induced vascular dysfunction by promoting EC-dependent vasorelaxation, through an increased nitric oxide (NO) bioavailability and reduced AngII-induced H₂O₂ release; these effects were prevented by the use of the P2Y11R antagonist NF340. Human vascular SMCs and ECs were subjected to AngII or H/R simulation in vitro. P2Y11R agonist modulated vasoactive factors in human ECs, that is, endothelial nitric oxide synthase (eNOS) and endothelin-1, reduced SMC proliferation and prevented the switch towards a synthetic phenotype. H/R and AngII increased ECs secretome-induced SMC proliferation, an effect prevented by P2Y11R activation. Thus, our data suggest that P2Y11R activation may protect blood vessels from HR-/AngII-induced injury and reduce vascular dysfunctions. These results open the way for new vasculoprotective interventions.     

Improved Controlled Release and Brain Penetration of the Small Molecule S14 Using PLGA Nanoparticles

Phosphodiesterase 7 (PDE7) is an enzyme responsible for the degradation of cyclic adenosine monophosphate (cAMP), an important cellular messenger. PDE7’s role in neurotransmission, expression profile in the brain and the druggability of other phosphodiesterases have motivated the search for potent inhibitors to treat neurodegenerative and inflammatory diseases. Different heterocyclic compounds have been described over the years; among them, phenyl-2-thioxo-(1H)-quinazolin-4-one, called S14, has shown very promising results in different in vitro and in vivo studies. Recently, polymeric nanoparticles have been used as new formulations to target specific organs and produce controlled release of certain drugs. In this work, we describe poly(lactic-co-glycolic acid) (PLGA)-based polymeric nanoparticles loaded with S14. Their preparation, optimization, characterization and in vivo drug release profile are here presented as an effort to improve pharmacokinetic properties of this interesting PDE7 inhibitor.     

Isobutane/2-butene alkylation on MCM-22 catalyst. Influence of zeolite structure and acidity on activity and selectivity

The catalytic behavior of the novel MCM-22 zeolite for the continuous alkylation of isobutane with 2-butene has been investigated at a temperature of 50°C, 2.5 MPa total pressure, and a variety of olefin space velocities. At high olefin conversions the MCM-22 zeolite showed a very high initial cracking activity attributable to strong Brønsted acid sites, as well as to the existence of strong diffusional restrictions of the TMP's (formed inside the zeolite) to exit through the channels. At short times on stream (TOS), TMP's account for ca. 40% of the C₈ fraction. The olefin conversion and the cracking activity rapidly decline with TOS, while the alkylate product became richer in dimethylhexenes, indicating a predominance of 2-butene dimerization and a loss of hydrogen transfer activity as the catalyst aged. Moreover, MCM-22 gives less TMP's than large-pore zeolites (USY, beta, mordenite), but more than the mediumpore ZSM-5 at similar 2-butene conversion. The latter catalyst was much more selective for olefin dimerization than for isobutane alkylation, presumably because formation of the bulkier TMP's was strongly impeded in its smaller pores.     

Bayesian bivariate generalized Lindley model for survival data with a cure fraction

The cure fraction models have been widely used to analyze survival data in which a proportion of the individuals is not susceptible to the event of interest. In this article, we introduce a bivariate model for survival data with a cure fraction based on the three-parameter generalized Lindley distribution. The joint distribution of the survival times is obtained by using copula functions. We consider three types of copula function models, the Farlie–Gumbel–Morgenstern (FGM), Clayton and Gumbel–Barnett copulas. The model is implemented under a Bayesian framework, where the parameter estimation is based on Markov Chain Monte Carlo (MCMC) techniques. To illustrate the utility of the model, we consider an application to a real data set related to an invasive cervical cancer study.     

The monounsaturated acyl- and alkyl-moieties of wax esters and their distribution in commercial orange roughy (Hoplostethus atlanticus) oil

Wax esters were isolated from commercial orange roughy (Hoplostethus atlanticus) oil by column chromatography and fractionated by argentation thin layer chromatography. Following transesterification, the resultant fatty acid methyl esters and fatty alcohols were analyzed by gas chromatography. both acyl- and alkyl-moieties were mainly of the monoene structure within the 16∶1–22∶1 range. After derivatization, the positions of the double bonds of even numbered fatty acid and fatty alcohol isomers were located by chromatography-mass spectrometry and compared. Results of these positional analyses indicate that the primary desaturation reactions takes place in the Δ9 position of pre-existing (C₁₄ to C₂₄) acyl chains. It is proposed that acyl components from 18∶1 are subjected to chain elongation to form a mixture of 24∶1 isomers as the final product. Apart from the 24∶1 acyl moiety of the wax esters, in which the double bond was almost exclusively in the Δ15 position, de novo biosynthetic reactions on acids and alcohols appear to yield related acyl- and alkyl-moieties of resynthesized wax esters.     

The anodic oxidation of thiocyanate ion dissolved as KSCN in dimethylsulphoxide

The anodic oxidation of SCN⁻ ion dissolved as KSCN in dimethylsulphoxide, on platinum electrodes, was investigated at ca 25, 60 and 160°C by means of various non-stationary electrochemical techniques. At low temperatures one anodic and two main cathodic processes were found. The anodic oxidation of SCN⁻ ion yields as primary product the SCN radical, which readily produces (SCN)₂. The latter can be in part reduced back to SCN⁻ ion, because it reacts in part yielding solvated hydrogen ions which cause the second cathodic reaction. In the region of 60°C, no (SCN)₂ cathodic current is observed. In the region of 160°C the only reaction is SCN⁻ ion oxidation and the primary product polymerizes to (SCN)_x, which forms a film on the electrode, causing passivation.

On the basis of kinetic data obtained for the different reactions, a mechanism for the anodic oxidation of the SCN⁻ ion and for the passivating film formation is suggested. The second process only partly fits the Müller model for the electrochemical growth of insoluble layers.     

Sets of Globally Optimal Stream Surfaces for Flow Visualization

Stream surfaces are a well‐studied and widely used tool for the visualization of 3D flow fields. Usually, stream surface seeding is carried out manually in time‐consuming trial and error procedures. Only recently automatic selection methods were proposed. Local methods support the selection of a set of stream surfaces, but, contrary to global selection methods, they evaluate only the quality of the seeding lines but not the quality of the whole stream surfaces. Global methods, on the other hand, only support the selection of a single optimal stream surface until now. However, for certain flow fields a single stream surface is not sufficient to represent all flow features. In our work, we overcome this limitation by introducing a global selection technique for a set of stream surfaces. All selected surfaces optimize global stream surface quality measures and are guaranteed to be mutually distant, such that they can convey different flow features. Our approach is an efficient extension of the most recent global selection method for single stream surfaces. We illustrate its effectiveness on a number of analytical and simulated flow fields and analyze the quality of the results in a user study.