The Impacts of Heat Treatment on Lap Joint Shear Strength of Black Pine Wood

This study was conducted to determine the impacts of heat treatment on lap shear strength, density, and mass loss of black pine wood. In the study, black pine wood boards bonded with polyurethane were subjected to temperatures of 160, 180, and 200°C for durations of 2 and 6 hours. Specimens having two layers were prepared from untreated and treated wood for mechanical testing of bond lines. Data were analyzed using variance analysis and Tukey's test to determine the impacts of changes in density and mass of heat-treated black pine wood on lap shear strength. The results indicated that the lap shear strength of black pine wood decreased as the intensity of heat treatment increased. The results also indicated that the minimum and maximum percentage decreases of lap shear strength were approximately 27% for 160°C and 2 hours and 78% for 200°C and 6 hours.     

Improvement of Mechanical Properties of Unsaturated Polyesters by Acrylonitrile

Propylene glycol- and diethylene glycol-based unsaturated polyesters were prepared and hardened by using styrene and acrylonitrile monomer mixtures. The addition of 12% acrylonitrile to a propylene glycol-based polyester containing 40% styrene increased the hardness from 12 BHN to 26 BHN. The addition of 20% acrylonitrile increased the impact strength of the same polyester from 14 J/m width to 39 J/m width. The diethylene glycol-based polyester containing 40% styrene and 40% acrylonitrile achieved a hardness of 23 BHN and an impact strength of 59 J/m width.     

The Nucleation Effect of PbSe Additive on Bi2Sr2CaCu2Oδ Glass Ceramics

Glass and Ceramics - The crystallisation kinetics and effects of doping on Bi2Sr2CaCu2Oδ (BSCCO) glass ceramic system with 0.0%, 0.1%, 0.3% and 0.5% PbSe were investigated in this study....     

Evaluation of Transport Phenomena for Removing Vanadium from Petrochemical Industry Solid Waste

Transport phenomena are investigated which are involved in the electrokinetic remediation process used for removing vanadium from deactivated catalysts from oil catalytic cracking that are currently allotted to cement plants and class-I landfills. Variables such as the concentration of electrolyte, electric potential, and applied electric current were evaluated in order to determine the effects produced by electroosmosis, diffusion, hydraulic gradient, and electromigration on the removal of vanadium from the catalyst. It was observed that migration is the most relevant phenomenon in the remediation tests, and for the best remediation condition, the migratory flow accounted for about 87 % of the vanadium removal.     

Electrochemical and optical properties of dicyclohexylmethyl substituted poly(3,4‐propylenedioxythiophene) analogue

An analogue of disubstituted 3,4‐propylenedioxythiophenes, namely 3,3‐bis(cyclohexylmethyl)‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepin (ProDOT‐CycHex₂), was synthesized and its electrochemical polymerization was carried out successfully in an electrolyte solution of 0.1 M tetrabutylammonium hexafluorophosphate dissolved in a mixture of acetonitrile and dichloromethane (3/1: v/v). The corresponding polymer called PProDOT‐CycHex₂ has a reduced band gap of 1.85 eV and an electrochromic property: blue/violet when neutralized and highly transparent when oxidized. Also, PProDOT‐CycHex₂ film exhibited faster response time (0.7 s) and higher coloration efficiency (769 cm²/C) during oxidation when compared to its benzyl substituted analogue. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46214.     

A novel UV‐cured interpenetrating organic–inorganic hybrid polymer network based phase change materials (IPN‐PCM)

The purpose of this paper is to introduce a novel UV‐cured interpenetrating polymer networked phase change materials (IPN‐PCMs), on which no article has been found in the so far published research. Maleated castor oil (MCO) was synthesized via maleinization reaction of castor oil with maleic anhydride. Organic–inorganic hybrid interpenetrating polymer networked (IPN) materials containing both cationic and radical sections and IPN‐PCMs containing tetradecanol, hexadecanol, and octadecanol were prepared. The chemical structure of MCO and organic–inorganic hybrid IPN‐PCMs were determined by using Fourier Transform Infrared Spectroscopy (FT‐IR). Differential scanning calorimetry (DSC) was used for examining the phase‐change behaviors of the materials. Thermal stability was investigated by thermogravimetric analysis (TGA). Moreover, the surface formation of the specimen was investigated by scanning electron microscopy (SEM). In conclusion, our study proved that because of their high latent heat storage scope and high thermal stability, the obtained organic–inorganic hybrid IPN‐PCMs could be used as thermal energy storage materials. POLYM. ENG. SCI., 58:870–875, 2018. © 2017 Society of Plastics Engineers     

Thermally Pretreated 46% Pt/Vulcan XC72: Characterisation by TGA/DSC/TEM and Cyclic Voltammetry

We report a study of thermal stability and impact of thermal pretreatment procedures for 46% Pt/Vulcan XC72 (Tanaka) fuel cell catalyst. Stability in air and in inert gas (nitrogen, argon, helium) has been investigated by thermal gravimetric analysis (TGA), TGA‐mass spectrometry (TGA‐MS) and differential scanning calorimetry (DSC). Two distinct low temperature mass loss processes (100–200 and 285–300 °C) were observed, each exhibiting unique pretreatment temperature dependencies. TGA‐MS data in helium show fragment ions that suggest the thermal degradation processes are associated with decomposition of materials such as processing aids. Transmission electron microscopy (TEM) reveals a modest increase in average Pt nanoparticle size upon thermal pretreatment. After a pretreatment protocol based on TEM and thermal characterisation (300 °C/15 min, N₂), the electrochemically active surface area did not increase. At the kinetically controlled potential region (E >0.8 V) there was a small drop in current density for treated 46% Pt/C in comparison with as‐received catalyst. The slowing in ORR kinetics is significant. Apparently, the removal of organic components, which would improve mass transport, is negated by increased nanoparticle size.     

Leaching of blended copper slag in microwave oven

Leaching of blended slag (BS) was investigated in a microwave oven using hydrogen peroxide and acetic acid. The BS was a mixture of converter and flash furnace slag containing 51% Fe₂O₃, 3.8% CuO, and 3.2% ZnO. The important variables that influence the metal extraction yield were leaching time, liquid-solid ratio, H₂O₂ and CH₃COOH concentrations. The preferred leaching conditions were as follows: CH₃COOH concentration 4 mol/L; H₂O₂ concentration 4 mol/L; microwave power 900 W; leaching time 30 min; liquid-solid ratio 25 mL/g BS; leaching temperature 100 °C. Under these conditions, the metal extractions of 95% Cu, 1.6% Fe, and 30% Zn were obtained. The results were compared with the traditional leaching results. It is evident that microwave heating causes a reduction in the leaching time. Also, the extraction yield results indicate that selective leaching of BS can be achieved under the preferred conditions. The dissolution kinetic of BS in hydrogen peroxide with acetic acid is controlled by a shrinking unreacted core model equation. The apparent activation energy and reaction order were found to be 16.64 kJ/mol and 1.09, respectively.     

New quality criteria in wastewater reuse : The case of Gran Canaria

Wastewater reuse plays a key role in this vital cycle of water because it is able to reduce the wastewater spilled. Simultaneously, the supply of water for specific uses is increased. A new regulation (Royal Decree 1620/2007) came into force in Spain in December 2007 and regulates the basic conditions for the wastewater reuse and establishes the required criteria of quality to waters according to use.In the present paper, different kinds of tertiary treatments in reuse of wastewater are described. We focused on the applied tertiary treatments in most wastewater treatment plants of Gran Canaria Island. Particularly, we analysed Hoya del Pozo wastewater treatment plant due to its wide number of technologies and processes.Finally, we reviewed the quality criteria used in the regenerated waters, in agreement with the new regulations.     

A combo technology of autotrophic and heterotrophic denitrification processes for groundwater treatment

In this study,a sequential process (heterotrophic up-flow column and completely mixed membrane bioreactors) was proposed combining advantages of the both processes.The system was operated for 249 days with simulated and real groundwater for nitrate removal at concentrations varying from 25 to 145 mg·L-1 NO3-N.The contribution of heterotrophic process to total nitrate removal in the system was controlled by dozing the ethanol considering the nitrate concentration.By this way,sulfur based autotrophic denitrification rate was decreased and the effluent sulfate concentrations were controlled.The alkalinity requirement in the autotrophic process was produced in the heterotrophic reactor,and the system was operated without alkalinity supplementation.Throughout the study,the chemical oxygen demand in the heterotrophic reactor effluent was (23.7 ± 22) mg·L-1 and it was further decreased to(7.5 ± 7.2) mg·L-1 in the system effluent,corresponding to a 70％ reduction.In the last period of the study,the real groundwater containing 145 mg·L-1 NO3-N was completely removed.Membrane was operated without chemical washing in the first 114 days.Between days 115-249 weekly chemical washing was required.