Assessment of overall migration and specific migration of 1,4-butanediol from a thermoplastic polyurethane film developed for fresh produce packaging

A thermoplastic polyurethane (PU) polymer was synthesized, casted into films, and specific and overall migration (OM) tests were applied. A new method with gas chromatography–flame ionization detector was proposed to measure specific migration (SM) of 1,4-butanediol from the PU film. OM values in the four established simulants were under the legal limits. Determination of 1,4-butanediol migrating from PU film to the three established simulants showed maximum SM result as 1.5 mg/kg which was far below the legal limits. Therefore, the PU film has a good potential as a safe food contact material. Moreover, the analytical method used for determination of SM of 1,4-butanediol resulted in good analytical characteristics and detection limits at ppm level. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48638.     

Antioxidant activity and proline content of leaf extracts from Dorystoechas hastata

Dorystoechas hastata (D. hastata) is a monotypic plant endemic to Antalya province of Turkey. D. hastata leaves are used to make a tea locally called “çalba tea”. Diethyl ether (E), ethanol (A), and water (W) were used for the sequential preparation of extracts from dried D. hastata leaves. A hot water extract (S) was also prepared by directly boiling the powdered plant in water. The antioxidant activities of the extracts were tested by ferric thiocyanate (FTC) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging methods. E extract exhibited the greatest antioxidant activity with FTC method, whereas S extract exhibited the lowest IC₅₀ value (6.17 ± 0.53 μg/ml) for DPPH radical scavenging activity. Total phenolic contents of the extracts were estimated by Folin–Ciocalteu method and S extract was found to contain the highest amount (554.17 ± 20.83 mg GAE/g extract) of phenolics. Extract A contained highest flavonoid content and there was a inverse linear correlation (R² = 0.926) between IC₅₀ values for DPPH radical scavenging activity and flavonoid contents of all extracts. Reducing power of extracts increased in a concentration-dependent manner. S extract was found to possess higher reducing power than equivalent amount of ascorbic acid at 20 and 25 μg/ml concentrations. Linear correlation between reducing power and concentration of E, A, and W extracts (R² > 0.95) was observed. A, W, and S extracts contained relatively high levels of proline. The results presented suggest that D. hastata may provide a natural source of antioxidants and proline.     

Fatty Acid Composition of Turkish <Emphasis Type="Italic">Rhododendron</Emphasis> Species

This study describes work aimed at the rapid evaluation of the fatty acid (FA) composition of Turkish Rhododendron species, particularly the leaves and the flowers of the toxic plants, R. ponticum and R. luteum. The FA profiles of the available parts of three other nonpoisonous Rhododendron species were also investigated. Subtotal extracts obtained (using n-hexane, chloroform and methanol) from total chloroform:methanol (1:1) extracts were analyzed and compared to each other. Palmitic acid was found to be the most abundant FA in almost all Rhododendron extracts, and the majority of leaf and flower extracts contained significant portions of C18 unsaturated FAs (18:1n-9, 18:2n-6, 18:3n-3). The n-hexane extracts of R. ponticum leaves and R. luteum flowers were unique, as they contained an unusual series of even-chain iso FAs (C16–C24). Especially the n-hexane extracts were found to comprise uncommon FAs with odd-numbered carbons (C13–C29). Overall, n-hexane proved to be the best solvent by representing the richest FA profile, whereas chloroform or methanol appeared less suitable for FA analyses. Appreciable intra-species variations in FA compositions among the leaves as well as other anatomical parts examined were observed. This study highlights the chemotaxonomical importance of the FAs for the genus Rhododendron.     

The Human Induced Pluripotent Stem Cell Test as an Alternative Method for Embryotoxicity Testing

The evaluation of substances for their potency to induce embryotoxicity is controlled by safety regulations. Test guidelines for reproductive and developmental toxicity rely mainly on animal studies, which make up the majority of animal usage in regulatory toxicology. Therefore, there is an urgent need for alternative in vitro methods to follow the 3R principles. To improve human safety, cell models based on human cells are of great interest to overcome species differences. Here, human induced pluripotent stem cells (hiPSCs) are an ideal cell source as they largely recapitulate embryonic stem cells without bearing ethical concerns and they are able to differentiate into most cell types of the human body. Here, we set up and characterized a fetal bovine serum (FBS)-free hiPSC-based in vitro test method, called the human induced pluripotent stem cell test (hiPS Test), to evaluate the embryotoxic potential of substances. After 10 days in culture, hiPSCs develop into beating cardiomyocytes. As terminal endpoint evaluations, cell viability, qPCR analyses as well as beating frequency and area of beating cardiomyocytes by video analyses are measured. The embryotoxic positive and non-embryotoxic negative controls, 5-Fluorouracil (5-FU) and Penicillin G (PenG), respectively, were correctly assessed in the hiPS Test. More compounds need to be screened in the future for defining the assay’s applicability domain, which will inform us of the suitability of the hiPS Test for detecting adverse effects of substances on embryonic development.     

Beam analysis of angle-ply laminate end-notched flexure specimens

Analysis and experiments on quasi-unidirectional and angle-ply laminate end-notched flexure specimens are presented. The analysis is based on laminated beam theory incorporating first-order shear deformation theory. Compliance and strain-energy release rate determined for relatively thin unidirectional and angle-ply laminate ENF specimens were in good agreement with a previous classical plate theory formulation. For thicker laminates, however, effects of shear deformation on the compliance of the ENF specimen become significant. An experimental study on glass/polyester quasi-unidirectional and angle-ply laminate ENF specimens was conducted. Specifically, [0]₆, [±30]₅ and [±45]₅ laminates with mid-plane delaminations were considered. Experimental compliance data agreed well with analytical predictions. The fracture toughness increased with increased angle θ at the ±θ interface. This is attributed to the fracture work associated with the debonding of transversely oriented fiber bundles in the quasi-unidirectional plies. The angle-ply laminates displayed more yarn debonding than the quasi-unidirectional laminate. For all laminates it was observed that the crack propagated in a non-uniform manner which is correlated with elastic coupling effects with cracked regions of the laminate beams.     

Fixed and dynamic bandwidth allocation strategies for wireless mobile integrated services networks

Performance evaluation of two bandwidth allocation strategies in wireless mobile integrated services networks is carried out. Performances of the proposed strategies are compared with those of the traditional guard channels and threshold strategies. In the study, a single wireless cell which is accessed by voice and non-voice traffic types producing, respectively narrowband and wideband calls is considered. In the proposed strategies a number of channels are reserved in a fixed or dynamic fashion for the use of originating wideband calls in addition to the guard channels allocated for the handoff calls. The results indicate that the two strategies have comparable advantages and by manipulating the number of reserved channels, desired performance levels can be achieved. The dynamic reservation based strategy makes the system fairer for the originating wideband calls while maintaining low handoff dropping probability and acceptable channel utilization levels. On the other hand, the fixed reservation strategy provides a lower handoff call dropping at comparable channel utilization levels. The tradeoff is between improving the handoff call dropping versus the originating wideband call blocking. Both strategies provide better performance for the originating wideband calls compared with that provided by the traditional guard channels strategy.

Stabilized Octahedral Frameworks in Layered Double Hydroxides by Solid‐Solution Mixing of Transition Metals

Pseudocapacitors have received considerable attention, as they possess advantages of both rechargeable batteries and electric double layer capacitors. Among various active materials for pseudocapacitors, α‐layered double hydroxides (α‐TM(OH)₂, TM = transition metal) are promising due to their high specific capacities. Yet, irreversible α‐to‐β phase transitions of α‐TM(OH)₂ hinder their long‐term cyclability, particularly when the TM is nickel. Here, it is reported that binary TM ion mixing can overcome the limited cycle lives of α‐TM(OH)₂ by stabilizing the octahedral frameworks of α‐TM(OH)₂. In particular, an α‐TM(OH)₂ with equal amounts of nickel and cobalt exhibits long‐term capacity retention (89.0% after 2000 cycles) and specific capacity (206 mA h g^?1), which are better than those of individual TM counterparts. A series of analyses reveals that the improved performances originate from the synergistic effects between the TM ions; the preferred trivalent state of cobalt ions stabilizes the octahedral framework by accommodating the detrimental Jahn–Teller distortion of Ni³⁺. The stabilized framework also widens the redox swing range of the nickel up to 4+, thus, increasing the specific capacity of the corresponding α‐TM(OH)₂. This study indicates that proper mixing of TMs is a prolific approach in enhancing the vital properties of α‐TM(OH)₂, a promising family of pseudocapacitor materials.     

Theophylline-loaded pectin-based hydrogels. II. Effect of concentration of initial pectin solution,crosslinker type and cation concentration of external solution on drug release profile

A series of drug-loaded pectin hydrogels were prepared by mixing method in two ion types, Ca⁺² or Zn⁺², for wound dressing applications and their drug release performances were investigated at pH 6.4 in four different calcium ion concentrations of external solution. Pectin hydrogels were synthesized in three different concentrations of initial pectin solution and theophylline was used as a model drug. Fourier transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy were used for hydrogel characterization. Additionally, fluid handling capacity, swelling behavior, dehydration rate, dispersion characteristic, dressing pH determination, water vapor permeability, oxygen permeability, surface contact angle, flexibility, mass per unit area, and thickness were determined for selected hydrogels. One of the most valuable contributions of our study is that the concentration of initial pectin solution and calcium ion concentration of external solution are very important parameters to obtain an effective drug release. After evaluating all data, we have shown that flexible and transparent pectin-based wound dressings can be synthesized as a controlled drug release system. Zinc-containing hydrogel was antibacterial against Staphylococcus aureus and Escherichia coli but not suitable for cell migration. On the other hand, calcium-based hydrogel was nontoxic on the fibroblast cells and it had no negative effect on cell migration. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48155.