Long-lasting luminescence in garnet-based phosphors prepared by combustion synthesis

Recently long-lasting luminescence (LL) has been reported in YAG doped with Pr³⁺ or Ce³⁺ processed in reducing atmosphere. However, YAG:Ce emission is yellow which is not attractive for long lasting applications. On the other hand, Ga substituted garnets give green emission at shorter wavelengths. We explored Ga substituted garnets prepared by combustion synthesis for LL. These phosphors do exhibit green LL, although the intensities are lower compared to that of YAG:Ce.     

Guest–host interaction in ferroelectric liquid crystal–nanoparticle composite system

The present paper deals with the characterization of a ferroelectric liquid crystal–nanoparticle (FLC–NP) composite system. The dielectric, electrical and polarization property of the FLC–NP composite system have been studied as a function of temperature and frequency. Ferroelectric Cu-doped ZnO (Cu–ZnO) nanoparticles have been added to the pure ferroelectric liquid crystal (FLC) Felix 17/100. The nanoparticles are bigger in size as compared to FLC molecules; therefore, they distort the existing geometry of FLC matrix and set up an antiparallel correlation with the dipole moments of the host FLC molecules. This antiparallel correlation of guest–host geometry reduces the net ferroelectricity of the composite system and modifies all the physical properties of the pure FLC. The change in properties has been analysed and explained in the light of guest–host interaction.     

Morphology optimization for achieving air stable and high performance organic field effect transistors

To develop an all organic active matrix light emitting display required for large area thin display, electronic paper and electronic paints, Si-based thin film transistor has to be replaced with organic thin film transistor (OTFT). The most important issues in OTFT are the low charge carrier mobility and poor stability under ambient conditions, which critically depend on how organic thin films are grown on different substrates. Here we show that both these issues are correlated and can be overcome by certain surface morphology which can only be achieved through anisotropic growth. Careful control of different growth parameters can lead to unprecedented control on thin film morphology which has been shown to be engineered reversibly and reproducibly. High temperature and low evaporation rate increase the diffusive mobility of molecules, which are responsible for the stacking of molecules to higher length scales. By carefully choosing a temperature and evaporation rate, elongated rod-like grains were grown for achieving high performance and stable thin film transistors.     

Fabric-drying process in domestic dryers

A theoretical analysis of the drying process occurring inside the household electric tumbler clothes-dryer is performed to determine various thermo-physical parameters affecting the energy consumption and for the development of a simulation model. Experiments are conducted on a test set-up, based on a compact tumble-dryer, to measure the values of the parameters necessary for evaluating the performance. Widely-accepted economy standards are considered for comparison of simulation and experimental results. The simulation results are in reasonable agreement with experimental data. An empirical correlation for the specific moisture-extraction rate (SMER) is developed to translate energy-consumption information from one standard to the other.     

Effect of aluminium phosphate as admixture on oxychloride cement

The effect of admixing of aluminium phosphate on oxychloride cement in the matrix has been investigated. It is shown that aluminium phosphate retards the setting process of the cement and improves water-tightness.     

Plant‐mediated synthesis of silver and gold nanoparticles and their applications

Nanobiotechnology deals with the synthesis of nanostructures using living organisms. Among the use of living organisms for nanoparticle synthesis, plants have found application particularly in metal nanoparticle synthesis. Use of plants for synthesis of nanoparticles could be advantageous over other environmentally benign biological processes as this eliminates the elaborate process of maintaining cell cultures. Biosynthetic processes for nanoparticles would be more useful if nanoparticles were produced extracellularly using plants or their extracts and in a controlled manner according to their size, dispersity and shape. Plant use can also be suitably scaled up for large‐scale synthesis of nanoparticles. In view of this, we have reviewed here the use of plants or their extracts in the synthesis of silver and gold nanoparticles for various human applications. Copyright © 2008 Society of Chemical Industry     

Study of standard heat treatment on mechanical properties of Inconel 718 using ball indentation technique

The effect of standard heat treatment on the microstructure and mechanical properties of Ni–Fe base super-alloy, Inconel 718 was studied by optical microscopy and ball indentation technique (BIT) using small amount of specimen. In order to get good ductility, good formability, yield, tensile and creep rupture, as-received material was given the standard heat treatment, viz solution treatment at two temperatures 940 °C and 1040 °C for1 h and water quenched (WQ) followed by aging treatment at 720 °C for 8 h. and furnace cooling (FC). The BIT has revealed that the strengths for as-received material are maximum compared to other heat-treated materials. After solution treatment there has been a radical decline in strength. But the ageing causes a significant enhancement of strength. Optical microscopy studies supported the obtained BIT results. γ″-phase is the basic strengthening phase in 718 alloys.     

Study of dielectric, magnetic and ferroelectric properties in Bi1 − xGdxFeO3

Gd-doped BiFeO₃ polycrystalline ceramics were synthesized by solid-state reaction method and their dielectric and magnetic properties were investigated. X-ray diffraction pattern showed that Bi_1 − xGd_xFeO₃ (x = 0, 0.05 and 0.1) ceramics were rhombohedral. The Gd substitution has suppressed the usual impurity peaks present in the parent compound and we obtained single phase Bi_0.9Gd_0.1FeO₃ ceramic. Gd substitution reduced the antiferromagnetic Néel temperature (T_N) in Bi_1 − xGd_x FeO_3. An anomaly in the dielectric constant(ε) and dielectric loss(tan (δ)) in the vicinity of the antiferromagnetic Néel temperature (T_N) was observed. Ferroelectric and magnetic hysteresis loops measured at room temperature indicated the coexistence of ferroelectricity and magnetism. The room temperature magnetic hysteresis loops were not saturated, but the magnetic moment was found to increase with increase in Gd concentration.     

Antibacterial and dye degradation potential of zero‐valent silver nanoparticles synthesised using the leaf extract of Spondias dulcis

The present study reports a simple and low cost synthesis of zero‐valent silver nanoparticles (ZVSNPs) from silver nitrate using the leaf extract of Spondias dulcis. The ZVSNPs showed a unique peak at 420 nm in UV–vis spectrum. The SEM image portrayed cuboidal shaped particles. The EDX spectrum designated the elemental silver peak at 3 keV. In XRD, a sharp peak at 32.47° denoted the existence of (1 0 1) lattice plane and the average crystallite size was calculated as 48.61 nm. The lattice parameter was determined as 0.39 nm. The FTIR spectra of the leaf extract and ZVSNPs showed shifts in the specific functional group bands which ascertained the involvement of phytoconstituents in the formation and capping of nanoparticles. The average hydrodynamic size was measured as 59.66 nm by DLS method. A low PDI, 0.187 witnessed the monodispersity. A negative zeta potential value of −15.7 mV indicated the negative surface charges of the nanoparticles. The bactericidal action of ZVSNPs was demonstrated against two pathogens S.typhimurium and E.coli during which a dosage dependent zone of inhibition results was observed. Additionally, the catalytic potential of ZVSNPs was examined for the degradation of methylene blue dye in which an accelerated degradation of the dye was observed.Inspec keywords: antibacterial activity, crystallites, electrokinetic effects, scanning electron microscopy, nanoparticles, particle size, ultraviolet spectra, X‐ray chemical analysis, microorganisms, light scattering, nanofabrication, materials preparation, X‐ray diffraction, visible spectra, silver, dyes, Fourier transform infrared spectraOther keywords: wavelength 420.0 nm, Ag, voltage ‐15.7 mV, size 59.66 nm, size 0.39 nm, size 48.61 nm, electron volt energy 3.0 keV, Fourier transform infrared spectra, methylene blue dye, bactericidal action, dynamic light scattering, lattice parameter, Escherichia coli, Salmonella typhimurium, Spondias dulcis, negative zeta potential, polydispersity index, crystallite size, leaf extract, X‐ray diffraction, energy dispersive X‐ray spectrum, cuboidal‐shaped particles, scanning electron microscopy image, ultraviolet–visible spectrum, silver nitrate, zero‐valent silver nanoparticles     

Electronic and vibrational excitations in layered highT c superconductors

In the series of the layered highT _c superconductors (A)_1,2 B₂Ca _n−1Cu _n O_2n+3,4 (A=Tl or Bi;B=Ba or Sr), withn=number of consecutive Cu-O layers, the electron energy states of some of the Tl-based systems have been investigated. The electron and phonon dispersion curves have been obtained. The electronic states near the Fermi level are dominated by the hybridized Cu(d) and the O(p) orbitals. The dispersion curves are highly two-dimensional with very small dispersion alongc-axis. The number of bands is enhanced with increase in the number of the consecutive Cu-O planes (n). The present results agree with those obtained earlier for other superconducting phases. The phonons are overall dominated by the vibrations of the light mass oxygen atom modes both lying in or outside the Cu-O planes. The low-frequency phonons involve the motions of the heavier Tl, Ba atoms etc.