Biodegradable biocomposites from poly(butylene adipate‐co‐terephthalate) and miscanthus: Preparation,compatibilization, and performance evaluation

Miscanthus fibers reinforced biodegradable poly(butylene adipate‐co‐terephthalate) (PBAT) matrix‐based biocomposites were produced by melt processing. The performances of the produced PBAT/miscanthus composites were evaluated by means of mechanical, thermal, and morphological analysis. Compared to neat PBAT, the flexural strength, flexural modulus, storage modulus, and tensile modulus were increased after the addition of miscanthus fibers into the PBAT matrix. These improvements were attributed to the strong reinforcing effect of miscanthus fibers. The polarity difference between the PBAT matrix and the miscanthus fibers leads to weak interaction between the phases in the resulting composites. This weak interaction was evidenced in the impact strength and tensile strength of the uncompatibilized PBAT composites. Therefore, maleic anhydride (MAH)‐grafted PBAT was prepared as compatibilizer by melt free radical grafting reaction. The MAH grafting on the PBAT was confirmed by Fourier transform infrared spectroscopy. The interfacial bonding between the miscanthus fibers and PBAT was improved with the addition of 5 wt % of MAH‐grafted PBAT (MAH‐g‐PBAT) compatibilizer. The improved interaction between the PBAT and the miscanthus fiber was corroborated with mechanical and morphological properties. The compatibilized PBAT composite with 40 wt % miscanthus fibers exhibited an average heat deflection temperature of 81 °C, notched Izod impact strength of 184 J/m, tensile strength of 19.4 MPa, and flexural strength of 22 MPa. From the scanning electron microscopy analysis, better interaction between the components can be observed in the compatibilized composites, which contribute to enhanced mechanical properties. Overall, the addition of miscanthus fibers into a PBAT matrix showed a significant benefit in terms of economic competitiveness and functional performances. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45448.     

Synthesis and optical characteristics of ZnO nanocrystals

Zinc oxide nanomaterials with an average particle size of 20–30 nm are readily synthesized by the reaction of zinc acetate and oxalic acid under hydrothermal conditions. The samples are characterized by XRD, SEM, TEM, UV and photoluminescence (PL) studies. The average crystal size of the as prepared ZnO nanopowder is determined by XRD and the values are in good agreement with the TEM analysis. UV absorption spectra revealed the absorption at wavelength < 370 nm indicating the smaller size of ZnO nanoparticles. The quality and purity of ZnO nanomaterial crystalline samples are confirmed by photoluminescence spectra.     

Detection of glucose,galactose, and lactose in milk with a microdialysis-coupled flow injection amperometric sensor

A microdialysis-coupled flow injection amperometric Sensor (microFIAS) was used to determine glucose, galactose, and lactose in milk. The sensor is based on enzyme-catalyzed reaction in combination with the three well-established analytical techniques, namely; microdialysis sampling, flow injection analysis (FIA), and amperometric detection. With the multianalyte sensor it was possible to detect glucose and galactose by sequential injection of their corresponding oxidase enzymes: glucose oxidase and galactose oxidase, while lactose was determined by injection of a mixture of beta-galactosidase and glucose oxidase enzymes. The sensor showed a linear response between 0.05 and 10 mM for glucose, between 0.1 and 20 mM for galactose and between 0.2 and 20 mM for lactose, respectively. The relative standard deviation values of the sensor measurements for glucose, galactose, and lactose were 3-4% (n = 3). The sensor measurements for lactose content in milk were compared with a standard method with an infrared spectrophotometer.     

Nonliposomal approach--a study of preparation of egg albumin nanospheres containing amphotericin-B

The stability of liposomes after introduction into the body is presently being discussed and needs thorough understanding. Hence, as a nonliposomal approach, egg albumin nanospheres were prepared by the pH-coacervation method, and a preliminary study was carried out of the influence of process variables on the size and shape of nanospheres by changing the pH of the albumin solution, concentration of albumin solution, and volume of cross-linking agent. The batch prepared with an albumin medium of pH 9, 2% concentration, and 100 μl of 4% glutaraldehyde-ethanol solution was found to have a spherical uniform shape with an average size of 497.6 nm. The ideal batch was loaded with the systemic antifungal drug amphotericin-B. Drug-loaded nanospheres were evaluated to study their in vitro release. They were found to exhibit a biphasic pattern with a cumulative percentage release of 97.7%.     

In situ synthesised TiO2 ‐chitosan‐chondroitin 4–sulphate nanocomposites for bone implant applications

The artificial materials for bone implant applications are gaining more importance in the recent years. The series titania‐chitosan‐chondroitin 4–sulphate nanocomposites of three different concentrations (2:1:x, where x ‐ 0.125, 0.25, 0.5) have been synthesised by in situ sol–gel method and characterised by various techniques. The particle size of the nanocomposites ranges from 30–50 nm. The bioactivity, swelling nature, and the antimicrobial nature of the nanocomposites were investigated. The swelling ability and bioactivity of the composites is significantly greater and they possess high zone of inhibition against the microorganisms such as Staphylococcus aureus and Escherichia coli. The cell viability of the nanocomposites were evaluated by using MG‐63 and observed the composites possess high cell viability at low concentration. The excellent bioactivity and biocompatibility makes these nanocomposites a promising biomaterial for bone implant applications.Inspec keywords: titanium compounds, filled polymers, nanocomposites, bone, orthopaedics, biomedical materials, sol‐gel processing, nanofabrication, particle size, swelling, microorganisms, cellular biophysics, nanomedicine, prostheticsOther keywords: in situ synthesised TiO₂ ‐chitosan‐chondroitin 4‐sulphate nanocomposites, bone implant applications, artificial materials, in situ sol‐gel method, particle size, swelling nature, antimicrobial nature, microorganisms, Staphylococcus aureus, Escherichia coli, cell viability, MG‐63, biomaterial, size 30 nm to 50 nm, TiO₂      

Process Parameter Optimization in Jatropha Methyl Ester Yield Using Taguchi Technique

Among all alternate fuel sources available, the biodiesel of Jatropha curcas appears to be a potential fuel as it widely exists in Asia. The Jatropha methyl ester (JME) is produced by transesterification process. In the transesterification process, alkyl group of ester exchanges with that of an alcohol. This work focuses on optimizing various parameters like quantities of methanol, KOH, and stirrer speed, which influence high JME yield. Based on L₉ orthogonal array, experiments are conducted by using Taguchi technique. All the nine combinations of L₉ orthogonal array are experimentally done for extraction of JME, and then it is used for analysis in Taguchi technique. The analysis of maximum yield is done on the basis of “larger is better” signal to noise ratio (S/N ratio). The best combination in the L₉ orthogonal array is found to be methanol (110 ml), KOH (1.306 gm), and stirrer speed (1200 rpm). The influence of methanol, KOH, and stirrer speed on the yield is found by analysis of variance (ANOVA). Based on the results of ANOVA, it is found that the influence of methanol, KOH, and stirrer speed on the yield are obtained as 70.10%, 20.35%, and 5.78%, respectively.     

Distribution of Etoposide-Loaded Hydrophilic Albumin Microspheres in Mice

Hydrophilic albumin microspheres of etoposide were prepared by the emulsion polymerization technique using glutaraldehyde as the cross-linking agent. The microspheres prepared had a mean diameter of 1.5 μm. The microspheres were injected into mice by the intravenous route. In all, 12 mice were selected for the study, out of which 10 were given the drug-loaded microspheres and 2 were kept as solvent control. The mice were sacrificed after 24 hr and the accumulation of drug was determined in lungs, liver, and kidney.     

Hydrogen Generation from CO2 Reforming of Biomass-Derived Methanol on Ni/SiO2 Catalyst

Topics in Catalysis - CO2 reforming of methanol for producing hydrogen was experimentally carried out in a fixed-bed reactor on 10%Ni/SiO2. The 10%Ni/SiO2 was completely reduced during H2...     

Green Nanosilver as Reinforcing Eco-Friendly Additive to Epoxy Coating for Augmented Anticorrosive and Antimicrobial Behavior

Epoxy resin GY250 representing diglycidyl ethers of bisphenol-A (DGEBA) was reinforced with 1, 3 and 5wt % of surface functionalized silver nanoparticles (F-AgNPs) which were synthesized using Couroupita guianensis leaves extract with a view of augmenting the corrosion control property of the epoxy resin and also imparting antimicrobial activity to epoxy coatings on mild steel. Corrosion resistance of the coatings was evaluated by EIS, potentiodynamic polarization studies and cross scratch tests. AFM, SEM, HRTEM and EDX were utilized to investigate the surface topography, morphology and elemental composition of the coatings on MS specimens. Results showed that the corrosion resistance, hardness and T_g of the DGEBA/F-AgNPs coatings increased at 1wt % of F- AgNPs. The DGEBA/F-AgNPs coatings also offered manifold antimicrobial protection to the MS surfaces by inhibiting the growth of biofilm forming bacteria like P. aeruginosa, B. subtilis, the most common human pathogen E. coli and the most virulent human pathogenic yeast C. albicans.