Oil recovery and lecithin production using water degumming sludge of crude soybean oils

BACKGROUND: Wet gums produced during aqueous degumming of crude soybean oils are currently processed to produce lecithin or added to meals to increase their nutritive value for animal feed. Oils occluded in these gums are generally not recovered or processed. In this work, three methods to recover occluded oil and obtain lecithin from wet gums were assayed: direct extraction of oil with cold acetone (Method I), extraction after water elimination under vacuum (Method II) and by solvent partition with hexane/ethanol (Method III). RESULTS: Higher oil yields (up to 588 g kg^?1 of occluded oil) were obtained when water was eliminated before extraction (Methods II and III). No significant differences were observed in lecithin yields between three methods (720–807 g kg^?1 of dried gums). Recovered oils had acidity = 16.7–21.7 g kg^?1 as oleic acid, TOTOX (total oxidation) values ≤ 8.82, unsaponifiable matter = 9.0–12.1 g kg^?1, and Phosphorus = 87–330 mg kg^?1. Lecithins obtained by Methods I, II and III hexane phase had the same purity level (610–691 g of total measured phospholipids kg^?1). CONCLUSIONS: The occluded oil in soybean wet gums can be recovered, with quality and stability indexes compatible with their reinsertion in the productive process, by water elimination and extraction with acetone. Lecithins can be obtained with different phospholipid composition and diverse application fields. Copyright © 2008 Society of Chemical Industry     

Mass propagation and essential oil analysis of Artemisia vulgaris

Artemisia vulgaris L. (Mugwort) is a threatened and valuable medicinal plant. Attempts have been made in this research to mass propagate its plantlets through in vitro liquid culture technology using Murashige and Skoog (MS) basal medium supplemented with 6-benzyl adenine (BA) (0.44-8.88 microM). Initially, 22.6 shoots (99.9% shooting frequency) developed from shoot tip explants cultured in MS with 4.44 microM BA at 100 ml flask capacity. This was further subcultured at increasing flask capacity (150, 250, and 500 ml) for shoot proliferation. Of the different concentrations of BA and flask capacities tested, 4.44 microM BA and 500 ml flask capacity were found to produce a maximum of 85.5 shoots after 30 d of culture. Shoot proliferation was found to increase with increasing flask capacity whereas shoot number decreased with increasing BA concentration (>4.44 microM). Individual shoots were isolated and rooted on MS medium containing 8.56 microM indole-3-acetic acid (IAA). Then the plantlets were acclimatized under standard laboratory conditions and later under greenhouse conditions. Fresh leaves were collected from greenhouse-grown plants and subjected to essential oil analysis by the simultaneous distillation and extraction method. GC-MS results revealed the presence of 88 components and the extracted oil was rich in camphor (16.8%), alpha-thujone (11.3%), germacrene D (7.2%), camphene (6.5%), 1,8-cineole (5.8%) and beta-caryophyllene (5.4%). This in vitro strategy can be a reliable method for the steady production of a large number of plants for essential oil production, which is reported for the first time for A. vulgaris.     

Spatial distribution and habitat characterization of schistosomiasis host snails in lake and land habitats of western Kenya

Intermediate host snails of schistosomiasis were surveyed in this study to determine their abundance and distribution in the lake and land aquatic habitats of Lake Victoria basin of Kenya. Several sites were sampled at eight locations, both in the lake and on the land. The habitat and/or vegetation type (i.e. open water, hippo grass, hyacinth, ambatch trees, other vegetation, stream, swamp, pond, dam) of the sampled aquatic sites within the locations were also differentiated, water physicochemical parameters were determined, and the abundance of different species or taxa of phytoplankton and zooplankton were enumerated and correlated with the abundance of schistosomiasis snails in the sites. The results indicated significantly more Biomphalaria sudanica snails than Bulinus africanus snails in different physical habitats on land (Student's t‐test, P < 0.05), as well as in different locations on land (Student's t‐test, P = 0.026). Regression analyses revealed that several physicochemical parameters, including dissolved oxygen (R² = ?0.659; n = 8; P = 0.014), pH (R² = 0.728; n = 8; P = 0.007) and turbulence (R² = ?0.616; n = 8; P = 0.02), were predictive of Biomphalaria spp. abundance, while pH (R² = 0.610; n = 8; P = 0.02) and turbulence (R² = ?0.578; n = 8; P = 0.028) were predictive of Bulinus spp. abundance in different locations in the lake. Cyanobacteria (R² = 0.638; n = 8; P = 0.02) and chlorophyceae (R² = ?0.50; n = 8; P = 0.05) were shown to be predictive of both Biomphalaria spp. and Bulinus spp. abundance in different locations in the lake. Zooplankton abundance varied significantly between different locations in the lake (One‐way anova , P < 0.001). Bosmina spp. were found to be predictive of both Biomphalaria spp. (R² = ?0.627; n = 8; P = 0.01) and Bulinus spp. (R² = ?0.50; n = 8; P = 0.05) in different locations in the lake. The results from this study will help inform policy regarding control measures for schistosomias and intermediate snail hosts in Lake Victoria waters, as well as in adjacent terrestrial aquatic habitats and even beyond.     

Migration of α-tocopherol from LDPE films to corn oil and its effect on the oxidative stability

The migration of α-tocopherol (α-T) from low density polyethylene (LDPE) films, added with 20 (film A) and 40 mg g^?1 (film B) to corn oil for 12 weeks at 5, 20 and 30 °C was determined. A LDPE film added with no α-T was used as control (film C). Diffusion coefficient (D) values for the film A system were 1.4 × 10^?11, 7.1 × 10^?11 and 30.3 × 10^?11 cm² s^?1 at 5, 20 and 30 °C, respectively. Meanwhile, D values for the film B system were 1.3 × 10^?11, 9.6 × 10^?11 and 51.1 × 10^?11 cm² s^?1 at the same temperatures. The activation energy (E_a) for the diffusion of α-T was 126.5 (film A) and 105.9 kJ mol^?1 (film B). The effect of the migration of α-T on the oxidative stability of corn oil was evaluated by monitoring hexanal content by solid phase micro-extraction (SPME) and gas chromatography. The hexanal content in the oil showed that both films added with α-T resulted suitable to maintain the oxidative stability of the oil for about 16 weeks at 30 °C, compared to 12 weeks for the oil in contact with the film C.     

Antiviral activity of donkey milk protein fractions on echovirus type 5

Antiviral activity of Ragusano donkeys' milk proteins was investigated for the effect on echovirus type 5, known to infect the gastrointestinal tract of humans. Three protein fractions were tested; casein (CN), whey protein (WP) and a low molecular whey protein fraction (LWP; <30,000 Da). The antiviral activity of WP and LWP was tested on echovirus type 5 at three concentrations (1, 5 and 10 mg mL^?1); CN was assessed only at the lower concentration. All donkey milk protein fractions showed significant inhibition on virus replication at the concentration of 1 mg mL^?1, and both WP and LWP fractions showed significant inhibition on the virus replication at all concentrations tested. The strongest antiviral effect was observed for the WP fraction. These findings show that the different whey proteins in donkey milk, probably acting in synergy, exert antiviral activity on echovirus 5 and might contribute to prevent gastrointestinal virus infections in humans.     

Magnetic response of soils and vegetation to heavy metal pollution--a case study

Fast and cost-effective detection of industrial pollution can significantly promote its ecological, economic, and social assessment. A magnetometric method, used for qualitative determination of anthropogenic contamination, meets these requirements but needs further development in more quantitative terms. It could be used successfully in numerous cases when the heavy metals coexist with strongly magnetic iron oxide particles in the source dust. We present an integrated magnetic and geochemical study that examines the utility of magnetometric techniques for rapid, qualitative detection of metallic pollutants in soils and vegetation. The new aspect of our approach, in comparison with previously published articles on this subject, is the combined investigation (magnetic and geochemical) of both soils and vegetation, thus using an additional medium for employing the magnetometry as a pollution proxy at a site. The study area is a small (approximately 3 km2) region in the suburbs of Sofia (Bulgaria), with the main pollution source being a metallurgical factory. Soil samples have been taken from the topmost 20 cm from private gardens, located at different distances from the factory. Vegetation samples were taken from ryegrass (both leaves and roots) and leaves from two kinds of deciduous trees (maple and acacia). The results show that both vegetation and soils are characterized by enhanced magnetic properties, compared to background material, which is due to the presence of magnetite particles of anthropogenic origin accompanying heavy metal emissions. SEM images and microprobe analyses reveal the presence of a significant amount of particles, containing heavy metals (including iron) in vegetation samples taken close to the main pollution source. Correlation analyses show a statistically significant link (correlation coefficients ranging from 0.6 to 0.7) between magnetic susceptibility and the main heavy metals (Cu, Zn, Pb) in soil samples, indicating that the magnetic susceptibility can provide a proxy method for identifying the relative contribution of industrial pollution in soils and vegetation, that is reliable, inexpensive, and less time-consuming than standard chemical analyses.     

Kinetic study and modeling of the high temperature CO2 capture by Na2ZrO3 solid absorbent

Hydrogen production through sorption enhanced reforming (SER) use a solid CO₂ absorbent to increase hydrogen purity (98%) and to perform reforming and WGS reactions in one single step, thus producing high methane conversions and important energy savings. Na₂ZrO₃ is as an alternate synthetic CO₂ solid absorbent for SER applications. The present research is aimed to establish CO₂ sorption kinetics parameters; reaction order, rate constant, apparent, intrinsic and diffusional activation energies. Na₂ZrO₃ sorption kinetics was studied through TGA as a function of CO₂ concentration and temperature. A global reaction rate of first order in CO₂ and a strong dependence in temperature was found. The approximate solution to the shrinking core model was used to fit the data. Modeling results indicated the surface reaction as the main resistance to the reaction rate, controlling reaction kinetics with only a minor contribution of the product layer diffusion resistance toward the end of the reaction.     

Effect of environmental daily temperature fluctuations over one year storage on the prediction of non-enzymatic browning in reduced-moisture foods stored at “ambient” temperature

Non-enzymatic browning predictions in reduced-moisture foods stored over one year at “ambient” temperature, were made using, (a) realistic environmental daily (and seasonal) temperature fluctuations, and (b) a constant mean temperature. Daily temperature records taken every 6 h from January 1st to December 31st (1460 temperature data) in four selected cities from Argentina, were used.

The predicted amount of browning over one year storage was different depending whether the annual mean temperature (T_am), the monthly mean temperature (T_mm) or the daily temperature fluctuations (T_df) were used for the predictions. Predicted browning over one year was generally higher when realistic storage conditions (i.e., daily/seasonal temperature fluctuations) rather than mean values (annual or monthly), were used instead.     

Development and validation of a new LC–MS/MS method for the simultaneous determination of six major ergot alkaloids and their corresponding epimers. Application to some food and feed commodities

A liquid chromatography–tandem mass spectrometry (LC–MS/MS) method was developed and validated for the simultaneous determination of six major ergot alkaloids, ergometrine, ergosine, ergotamine, ergocornine, ergokryptine and ergocristine, as well as their corresponding epimers in food and feed samples. The method involves extraction under alkaline conditions and subsequent clean-up by applying a simple and rapid liquid–liquid partitioning procedure prior to LC–MS/MS analysis. Evaluation of the method revealed good linearity, accuracy and precision. The limits of quantification varied from 0.1 to 1 μg/kg depending on the analyte and matrix. The average extraction and clean-up recoveries in different matrices were between 45 (only for ergometrine in biscuit) and 90%. The uncertainty associated with the analytical method was not higher than 51% and 30%, at concentration levels of 2.5 and 150 μg/kg respectively. Analyte epimerization proved to be minimal during the analytical procedure. The method has been successfully applied to the determination of ergot alkaloids in some Belgian food and feed commodities. Ergot alkaloids were found in 104 out of 122 samples investigated. Ergosine was the most frequently occurring alkaloid, while the highest levels were observed for ergotamine, ergocristine or ergosine, depending on the product type. The total alkaloid content in positive samples varied from 1 to 1145 μg/kg.