Salmonella enterica Enteritidis biofilm formation and viability on regular and triclosan-impregnated bench cover materials

Contamination of food contact surfaces by microbes such as Salmonella is directly associated with substantial industry costs and severe foodborne disease outbreaks. Several approaches have been developed to control microbial attachment; one approach is the development of food contact materials incorporating antimicrobial compounds. In the present study, Salmonella enterica Enteritidis adhesion and biofilm formation on regular and triclosan-impregnated kitchen bench stones (silestones) were assessed, as was cellular viability within biofilms. Enumeration of adhered cells on granite, marble, stainless steel, and silestones revealed that all materials were prone to bacterial colonization (4 to 5 log CFU/cm(2)), and no significant effect of triclosan was found. Conversely, results concerning biofilm formation highlighted a possible bacteriostatic activity of triclosan; smaller amounts of Salmonella Enteritidis biofilms were formed on impregnated silestones, and significantly lower numbers of viable cells (1 × 10(5) to 1 × 10(6) CFU/cm(2)) were found in these biofilms than in those on the other materials (1 × 10(7) CFU/cm(2)). All surfaces tested failed to promote food safety, and careful utilization with appropriate sanitation of these surfaces is critical in food processing environments. Nevertheless, because of its bacteriostatic activity, triclosan incorporated into silestones confers some advantage for controlling microbial contamination.     

Salivary Cytokines as Biomarkers for Oral Squamous Cell Carcinoma: A Systematic Review

The prognosis of patients with oral squamous carcinoma (OSCC) largely depends on the stage at diagnosis, the 5-year survival rate being approximately 30% for advanced tumors. Early diagnosis, including the detection of lesions at risk for malignant transformation, is crucial for limiting the need for extensive surgery and for improving disease-free survival. Saliva has gained popularity as a readily available source of biomarkers (including cytokines) useful for diagnosing specific oral and systemic conditions. Particularly, the close interaction between oral dysplastic/neoplastic cells and saliva makes such fluid an ideal candidate for the development of non-invasive and highly accurate diagnostic tests. The present review has been designed to answer the question: “Is there evidence to support the role of specific salivary cytokines in the diagnosis of OSCC?” We retrieved 27 observational studies satisfying the inclusion and exclusion criteria. Among the most frequent cytokines investigated as candidates for OSCC biomarkers, IL-6, IL-8, TNF-α are present at higher concentration in the saliva of OSCC patients than in healthy controls and may therefore serve as basis for the development of rapid tests for early diagnosis of oral cancer.     

Porous calcium alginate–gelatin interpenetrated matrix and its biomineralization potential

Artificial bone composites exhibit distinctive features by comparison to natural tissues, due to a lack of self-organization and intimate interaction apatite-matrix. This explains the need of “bio-inspired materials”, in which hydroxyapatite grows in contact with self-assembling natural polymers. The present work investigates the function of a rational design in the hydroxyapatite-forming potential of a common biopolymer. Gelatin modified through intrinsic interactions with calcium alginate led through freeze-drying to porous hydrogels, whose architecture, constitutive features and chemistry were investigated with respect to their role on biomineralization. The apatite-forming ability was enhanced by the porosity of the materials, while the presence of alginate-reinforced Gel elastic chains, definitely favored this phenomenon. Depending on the concentration, polysaccharide chains act as “ionic pumps” enhancing the biomineralization. The mineralization-promoting effect of the peptide-polysaccharide network strictly depends on the hydrogels structural, compositional and morphological features derived from the interaction between the above mentioned two components.     

Enhanced photocatalytic activity of C-N-codoped TiO2 films prepared via an organic-free approach

An organic-free sol-gel method was developed to synthesize crack-free, high surface roughness and visible-light-active C-N-codoped TiO(2) films. These films were subsequently evaluated for its photodegradation efficient using stearic acid as the model pollutant compound. The current approach avoids the use of hazardous organic solvents and employs carbon black as the carbon source as well as a template to increase the surface roughness. The presence of carbon and nitrogen species in TiO(2) was studied and discussed. The concentrations of carbon and nitrogen dopants in the TiO(2) films were affected by calcination temperature and the concentration of carbon black. Optimal visible light photocatalytic activity was observed for C-N-codoped TiO(2) film at 10.0 wt.% C, which was more than double that of the N-doped TiO(2) film. The enhancement in visible light photocatalytic activities of the C-N-codoped TiO(2) films was attributed to the synergistic effects of carbon and nitrogen dopants, and high surface roughness of the prepared films.     

Alkylphenols and phthalates in bottled waters

The aim of this study was to investigate the occurrence of endocrine disrupting compounds (EDCs) in bottled waters. The examined compounds were bisphenol A (BPA), nonylphenol (NP), tert-octylphenol (tOP), dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), butyl benzyl phthalate (BBP), di(2-ethylhexyl)phthalate (DEHP) and di(n-octyl)phthalate (DNOP). The presence of EDCs in bottled waters under poor storage conditions was also investigated after exposure outdoors under realistic conditions for 15 and 30 days. EDCs were recovered after liquid-liquid extraction and determined by employing Gas Chromatography-Mass Spectrometry. Most of these compounds were detected in bottled water from different brands purchased from local market. Storage at outdoor conditions had no significant effect on the concentrations of the examined compounds. Only BPA occurred at higher concentrations in polycarbonate containers exhibited an increasing trend during exposure. The estimated exposure to EDCs via consumption of drinking water was very low.     

Low-temperature noninjection approach to homogeneously-alloyed PbSe(x)S(1-x) colloidal nanocrystals for photovoltaic applications

Homogeneously alloyed PbSe(x)S(1-x) nanocrystals (NCs) with their excitonic absorption peaks in wavelength shorter than 1200 nm were developed for photovoltaic (PV) applications. Schottky-type solar cells fabricated with our PbSe?.?S?.? NCs as their active materials reached a high power conversion efficiency (PCE) of 3.44%, with an open circuit voltage (V(oc)) of 0.49 V, short circuit photocurrent (J(sc)) of 13.09 mA/cm2, and fill factor (FF) of 0.54 under Air Mass 1.5 global (AM 1.5G) irradiation of 100 mW/cm2. The syntheses of the small-sized colloidal PbSe(x)S(1-x) NCs were carried out at low temperature (60 °C) with long growth periods (such as 45 min) via a one-pot noninjection-based approach in 1-octadecene (ODE), featuring high reaction yield, high product quality, and high synthetic reproducibility. This low-temperature approach employed Pb(oleate)? as a Pb precursor and air-stable low-cost thioacetamide (TAA) as a S source instead of air-sensitive high-cost bis(trimethylsilyl)sulfide ((TMS)?S), with n-tributylphosphine selenide (TBPSe) as a Se precursor instead of n-trioctylphosphine selenide (TOPSe). The reactivity difference of TOPSe made from commercial TOP 90% and TBPSe made from commercial TBP 97% and TBP 99% was addressed with in situ observation of the temporal evolution of NC absorption and with 31P nuclear magnetic resonance (NMR). Furthermore, the addition of a strong reducing/nucleation agent diphenylphosphine (DPP) promoted the reactivity of the Pb precursor through the formation of a Pb-P complex, which is much more reactive than Pb(oleate)?. Thus, the reactivity of TBPSe was increased more than that of TAA. The larger the DPP-to-Pb feed molar ratio, the more the Pb-P complex, the higher the Se amount in the resulting homogeneously alloyed PbSe(x)S(1-x) NCs. Therefore, the use of DPP allowed reactivity match of the Se and S precursors and led to sizable nucleation at low temperature so that long growth periods became feasible. The present study brings insight into the formation mechanism of monomers, nucleation/growth of colloidal composition-tunable NCs, and materials design and synthesis for next-generation low-cost and high-efficiency solar cells.     

Bottom-up photonic crystal cavities formed by patterned III-V nanopillars

We report on the formation and optical properties of bottom-up photonic crystal (PC) cavities formed by III-V nanopillars (NPs) via catalyst-free selective-area metal-organic chemical vapor deposition on masked GaAs substrates. This method of NP synthesis allows for precise lithographic control of NP position and diameter enabling simultaneous formation of both the photonic band gap (PBG) region and active gain region. The PBG and cavity resonance are determined by independently tuning the NP radius r, pitch a, and height h in the respective masked areas. Near-infrared emission at 970 nm is achieved from axial GaAs/InGaAs heterostructures with in situ passivation by laterally grown InGaP shells. To achieve out-of-plane optical confinement, the PC cavities are embedded in polydimethylsiloxane (PDMS) and removed from the growth substrate. Spatially and spectrally resolved 77 K photoluminescence demonstrates a strong influence of the PBG resonance on device emission. Resonant peaks are observed in the emission spectra of PC cavities embedded in PDMS.     

Study of the activity of Grubbs catalyst-functionalized multiwalled carbon nanotubes in the ring opening metathesis polymerization

The synthesis of polynorbornene by ring opening metathesis polymerization (ROMP), in the presence of 1st and 2nd generation Grubbs catalyst-functionalized multiwalled carbon nanotubes (MWCNT), has been studied. MWCNTs were obtained by catalytic chemical vapour deposition (CCVD) of ethylene. A full characterization of the 1st and 2nd generation Grubbs catalyst-functionalized nanotubes was performed by FTIR and TG-DTG-MS. The amount of catalyst grafted to the nanotube surface was estimated. The activity of the catalyst-functionalized nanotubes in ROMP of 2-norbornene was found to be similar to that of bare 1st and 2nd generation Grubbs catalysts. The characterization of polynorbornene-carbon nanotube composites shows that the nanotubes are well dispersed in the polymer matrix.